With the work that you do for the team you are entitled to a few "Oh SH@ts". :up:Quote:
Originally Posted by VietOZ
Printable View
With the work that you do for the team you are entitled to a few "Oh SH@ts". :up:Quote:
Originally Posted by VietOZ
DOH!Quote:
Originally Posted by VietOZ
Its life, moving and job are the immediate priorities, now if it had been like a month, then I think Dave would be @ your front door and STILL have you on the phone.:rofl:
Only just saw RAMMIE's leaving thread, not good news, so I OC'ed the clovers a bit more. I left them running at just the BSEL mod speed 333x9-3GHz, kicked it up to 370x9=3.33GHz, another 2.64GHz for the team.
I upped my Qx6700 to 3.4, doesn't want to boot @ 3.6 and don't want to fight with the 680i right now.
I am getting a new 680i and will flash to P31, see what I can get for an OC on that.
Will hopefully have my 3220 up again, sometime by the end of the month.
That will add 4 cores, and if I can decent air cooler, will push for over 3Hz.
Easynews 4,480,138
XtremeSystems 4,416,850 :down:
Slow Death :shakes:
I think you will error at 370 on the memory but good luck.Quote:
Originally Posted by [XC]Atomicpineapple
Get out the delta's to cool them!:up:
Moving this from PD-820 stock clocked to hopefully OCed e6600 and adding an e2140 this weekend. It's no quad, but it's my first C2D and I'm pretty sure that it'll do something...
save electricity too probably, those PDs aren't the most efficient things aroundQuote:
Originally Posted by [XC] Kayin
I bumped the quad to 3.6 and added my work lappy (Pentium M 2ghz). That's almost 20ghz crunching. Yesterday I had my first 15K day since August.
Well its been running all night at 370 with a 92mm fan on the RAM. Dunno what RPM/CFM it is but its not making much noise so it cant be anything fantastic. Just checked work units and none have errored out so it looks all good!:up:Quote:
Originally Posted by Movieman
Wednesday:
Easynews 4,533,801
XtremeSystems 4,193,961
Ouch! This hurts.....
We'll get them Don..It's a battle but we'll win this one.Quote:
Originally Posted by Philly_Boy
getting rumors of some new 45nm parts that might be available to me in a week or so that should make a difference.;)
We've also been taking a huge hit on the HCC work units when run on any 8 core machine.
There is a problem with "page faults" and they are seeing it now from more people than just me reporting it.
I would suggest to anyone running HCC that you look VERY carefully at the timeframes your machine is doing the work units. VERY carefully!!!!!!
So far it seems( and keep in mind that I am not a software guy) that when more than one HCC WU is run at a time there are issues.
What I do know for fact is that mesh's clover was taking a 6000 point a day hit by running HCC and I have moved it back to FAAH.
Dave , this is ONLY on 8 core machines , right?
I think so..BUT a guy posted that his P4 single core got one point an hour.:eek:Quote:
Originally Posted by [XC] Jaco
This is why I'm saying go and check on your WCG page in the results section on valid WU's on machines running HCC and see what your completion times are and how your doing on claimed vs awarded points.
The clover was taking WAY too long to finish these compared to other machines from the data I saw.
Now I'll agree, there are many machines that are faster per core than the clovers, most of the quads are, but lets be realistic, of the 823,000 machines on WCG I'd bet the clovers are up in the top 1% for speed but they were getting absolutely killed in HCC and that flys in the face of what I've seen over the past year doing FAAH WU.
Maybe it is just my newb'ness but I had a lot of HCC "pending" in the last few days...maybe 30% or more...so claimed = 50 or so points and I got nothing for them. Is this a normal thing??
Forget the "pending" just look at the "valid"..Quote:
Originally Posted by JungleMaster
Pending means the other guy in the quorum hasn't sent his back yet..
Probably some shmuck on EasyNews with a 486..:rofl:
For these HCCs, I went from 4 hours avg, @ 3.4Ghz, now its saying like 8 hours @ same speed on my QX6700........
Think if we drop the HCC and focus on other units, that would be an improvement?
Then again, not working on HCC doesn't accompolish our primary goal?!?!
It needs a fix, that simple..Quote:
Originally Posted by phelan1777
I know, I'd like to do the Cancer project myself but AIDS is also important to me. It's a judgement call on everyones part.
My thinking is I will concentrate on FAAH till they fix the Cancer project then jump on it with all I have.
As much as I want to crunch Cancer I am going back to FAAH until the bugs are completely worked out.Quote:
Originally Posted by Movieman
Well fold3 and fold5 are both crunching HCC right now. Looks like it was progressing OK until I remote desktoped to them, now they are just sitting atm with the time remaining increasing now :rolleyes: We'll see what happens. For some reason on fold5 it is running an HCC unit due on the 8th while there are four DDDT units due on the 7th it is ignoring right now :eh: Who knows...
Someone may wanna contact DDTUNG, I'd hate for him to waste all that wattage for nothing.
Yea I hear that the power company put a SubStation in his back yard. :rofl:Quote:
Originally Posted by =CDU= CNP
I realise we have been beaten in the last few days...but this is what I like to see:
Current Members...
Clubic 7,456
Easynews 5,968
Team 2ch 5,793
.
.
.
.
XtremeSystems 750 :up:
From yesterday which I think was only updated an hour ago...
Easynews 4,511,321
XtremeSystems 4,297,197 :down:
That's what, four or five days in a row?
The cancer project seems to be working fine here. Credit claimed and granted very close. That's on an E6700 / Vista Ultimate 32, Q6600 / Vista Ultimate 32 (switched to 64 bit today), QX6700 / XP Pro and a couple of P4's with XP Home.