The Official Opteron 939 Overclocking Thread

Printable View

Show 100 post(s) from this thread on one page

11-15-2005, 04:50 AM
pcfreak

Quote:

Originally Posted by Dani

146 CABYE 0540FPBW

Now 3006MHz 1.408V, 2x256mb Corsair BH5 273FSB 2-2-5-2-7-13 1T 3.6V, StressPrime has run now 45min., let's hunt for +24h

Cooling: TT BigTyphoon, ambient around 23ºC -> CPU 40-43ºC under stress

Just got mine. I hope it clocks as well as this one ^^ :toast:
11-15-2005, 05:57 AM
Nossie

Got my Opteron 146 CABYE 0540 FPMW today,

Default voltage :

http://img10.imageshack.us/img10/922/result16bk.th.jpg

:toast:

gonna do some more testing, hopefully 3ghz+ :p
11-15-2005, 06:14 AM
Ket

that........is crazy high for default voltage, bastard :p :D
11-15-2005, 06:21 AM
G4h4o8s6T

1 Attachment(s)

Quote:

Originally Posted by shimmishim

all right.

CABNE 0530APMW 2.9 ghz stable with only 1.45 volts
CABYE 0540FPMW 2.9 ghz testing with only 1.45 volts

i can get it OCCT stable at 3 ghz with 1.47 volts but can't get it to prime for longer than 10 minutes.

am I board limited or am just having awesome bad luck (2.9 is awesome but can't get to 3.0 which is bad)?

Im also expieriencing the same problem, my CABYE 0540FPMW batch 0092 can do 2.7ghz @1.4v (OCCT/P95 stable) but no matter what voltage I use for 2.8ghz+ its totally unstable. Also OCCT is reporting my 5v rail all over the place.......would this also cause instability?? So Im hoping its either my board, PSU or runnning such a high divider.........anyone else think so as well?? Its either that or I have the worst clocking FPMW around :stick:

check out my 5v rail.........
11-15-2005, 06:27 AM
Shark-357

That 5V line is really bad u need to replace ur PSU :eek:
11-15-2005, 06:37 AM
G4h4o8s6T

Quote:

Originally Posted by Shark-357

That 5V line is really bad u need to replace ur PSU :eek:

Yeah but is there any other way I can test it, in case OCCT is reporting it wrong........cause all my other rails are solid. By the way, im using a SeaSonic 400w SS......thanks for any help :D
11-15-2005, 07:02 AM
dnottis

I cannot get my 540 FPAW stable at 3Ghz, 2.9-2.95 looking to be tops on air.
11-15-2005, 07:02 AM
Shark-357

@G4h4o8s6T

Its very weird coz i doubt ur PC would work if 5V rail would be that low :nono:
11-15-2005, 07:09 AM
TEDY

geeze man seasonic psu i mean come on ROFL :)
11-15-2005, 07:50 AM
G4h4o8s6T

Shark......Yeah I was thinking the same thing, still could be my board or running the high divider with my VR

Quote:

Originally Posted by TEDY

geeze man seasonic psu i mean come on ROFL :)

Yeah I know its not the best psu out there, but it really isnt that bad...... ;)
11-15-2005, 08:07 AM
TEDY

yes it's bad you prooved it ;) no offense change PSU :D
11-15-2005, 08:33 AM
alpha0ne

Quote:

Originally Posted by TEDY

yes it's bad you prooved it ;) no offense change PSU :D

And a real OC'ing board would help, sell the giga to someone you dont like :)
11-15-2005, 08:35 AM
geto

hah That's funny
11-15-2005, 08:40 AM
G4h4o8s6T

Yeah I was planning on getting rid of the board, and my 6600GTs.........get an Ultra-D/7800GT, I just wanted to see what it could do with what I have first :) Also, like Shark sugessted........my computer probably wouldnt work if my 5v rail was dropping under 2v, so its possible OCCT is reporting it wrong and my psu is ok.
11-15-2005, 08:46 AM
Monge

Quote:

Originally Posted by G4h4o8s6T

Yeah I was planning on getting rid of the board, and my 6600GTs.........get an Ultra-D/7800GT, I just wanted to see what it could do with what I have first :) Also, like Shark sugessted........my computer probably wouldnt work if my 5v rail was dropping under 2v, so its possible OCCT is reporting it wrong and my psu is ok.

Use a DM to measure the rails under load.
11-15-2005, 09:36 AM
TEDY

Quote:

Originally Posted by alpha0ne

And a real OC'ing board would help, sell the giga to someone you dont like :)

didnt get it ???? :slap:
11-15-2005, 09:45 AM
MaxxxRacer

G4h4o8s6T use a multi meter to measure the 5 volt rail.. the sensors on the mobo are more than useles..
11-15-2005, 10:05 AM
187(V)URD@

Quote:

Originally Posted by TEDY

geeze man seasonic psu i mean come on ROFL :)

Maybe you don't know it but seasonic are good psu's.
11-15-2005, 10:23 AM
G4h4o8s6T

Quote:

Originally Posted by MaxxxRacer

G4h4o8s6T use a multi meter to measure the 5 volt rail.. the sensors on the mobo are more than useles..

Thanks Ill def. look into that, and yea I figured that the sensors are garbage :p:

Quote:

Originally Posted by 187(V)URD@

Maybe you don't know it but seasonic are good psu's.

Yeah Ive read that seasonic is right behind PC P&C when it comes to quality
11-15-2005, 10:24 AM
TEDY

then why his 5v line sux ?
11-15-2005, 10:30 AM
Garrett

Quote:

Originally Posted by Jupiler

Hey man, np. :)

My 2 146's shipped today from Alternate. Hope to get them pretty soon, and that they're from a good batch.
Thx again for the help. :toast:

np man, anytime, you know :) :thumbsup:
11-15-2005, 10:34 AM
Jupiler

Got both in this afternoon.
Both are CABYE 0540 FPMW. One is for me, the other one for somebody else.

Running Prime now for about 2 hours at 3Ghz, 1.456V, watercooled.
Not bad for a start. More testing in the next coming days.

http://users.skynet.be/MetalHead/146/146at3000.jpg
11-15-2005, 10:38 AM
NYCTeeN82

The mobo itself could be going crazy and reading 5V wrong. I swear when something's not right, you start replacing your parts to see who/what was the culprit. As soon as I replace everything, I end up spending more and more money right after. A computer is like an endless pit. (Mostly because how fast technology is getting outdated)
11-15-2005, 11:37 AM
rookiekiller

http://img275.imageshack.us/my.php?image=su3ghz0ne.jpg =o) so happy, but mem is not good enough, only 2T
11-15-2005, 12:16 PM
Primoz78

Here are my resoults after a little bit of burning...

http://img480.imageshack.us/img480/8366/clip49mj.jpg

But unfortunately I can`t get it to 3100 or 3200mhz even with 1.55V...:slapass:

Regards,
Primoz
11-15-2005, 12:18 PM
GUFY

http://img120.imageshack.us/img120/2...004124v3ky.jpg http://img460.imageshack.us/img460/9...01385690in.jpg

:banana: :banana: :banana: :banana: :banana:
11-15-2005, 12:57 PM
Dani

With TT BigTyphoon
Did'nt see +24h becouse we had power cut in house :(
This was taken before I went to job

http://koti.mbnet.fi/dani69/DFI%20nF...4Vcore_AIR.gif
11-15-2005, 01:35 PM
kakaroto

2 Attachment(s)

http://xtremesystems.org/forums/atta...id=39891&stc=1

Both are doing:

http://xtremesystems.org/forums/atta...id=39892&stc=1

Sweet~! :D
11-15-2005, 01:46 PM
harpyboy

hey guys..

anyone knows what a 148 CABYE 0540 can do on water ??? Newegg apparently has them now.
11-15-2005, 02:18 PM
TEDY

:banana::banana::banana::banana:ing newegg is :banana::banana::banana::banana:ing crazy 230$
11-15-2005, 02:22 PM
Wiker

Did just recieve my 146 from www.komplett.se
146 CABYE 0540FPMW sweet :D I hope 3ghz on air.
11-15-2005, 03:59 PM
SPivX

Quote:

Originally Posted by Jupiler

Got both in this afternoon.
Both are CABYE 0540 FPMW. One is for me, the other one for somebody else.

Running Prime now for about 2 hours at 3Ghz, 1.456V, watercooled.
Not bad for a start. More testing in the next coming days.

http://users.skynet.be/MetalHead/146/146at3000.jpg

hey man, nice OC! what batch numbers? i hope i will get my two CABYE 0540 FPMW with batch 0001 and 0230 tomorrow :slobber:
11-15-2005, 04:07 PM
tatts

the 148 is a waste of time imo, my 146 CABYE 0540FPBW is stable 2.8ghz stock V, 3ghz 1.45V & think 3.2ghz is stable 1.6V (still testing) were has my 148 CABYE 0540FPBW needs 1.65V for 3ghz
11-15-2005, 06:12 PM
KenRico

Got mine today! Will be testing out budget oc with BioStar Tforce6100-939, some SuperTalent CS2, ZALMAN CNPS-7000B-CU LED, WD 2500KS, and X-Qpack SFF Case. :banana:

CABYE 0540 FPAW from www.chipsandmemory.com - will have to call or email to setup, he has only a few more currently.

:lsfight:
11-15-2005, 06:29 PM
phadeout

Quote:

Originally Posted by tatts

the 148 is a waste of time imo, my 146 CABYE 0540FPBW is stable 2.8ghz stock V, 3ghz 1.45V & think 3.2ghz is stable 1.6V (still testing) were has my 148 CABYE 0540FPBW needs 1.65V for 3ghz

Tatts,

Do they both have the IHS removed? It's possible the 148 is just as good, but has bad heat spreader contact compared to say perfect contact on the 146...
11-15-2005, 06:39 PM
AP0ll0UK

I'm having a few problems with my Opteron 146. Not sure if it's something I've missed in complete n00bness or what the problem can be. Rather than double post, you can find thread here http://www.xtremesystems.org/forums/...ad.php?t=80129 and I'd be grateful for any advice you can give.

Hope this is ok.

Thanks.
11-15-2005, 07:28 PM
dnottis

Quote:

Originally Posted by KenRico

CABYE 0540 FPAW from www.chipsandmemory.com - will have to call or email to setup, he has only a few more currently.

So far mine is stable up to 2920 with Big Typhoon.

http://www.3dxtreme.net/other/CPUS/O...-12hrprime.jpg

http://www.3dxtreme.net/other/CPUS/O...W/IMG_2303.jpg
11-15-2005, 08:29 PM
BadlyDrawnBoy

Quote:

Originally Posted by KenRico

Got mine today! Will be testing out budget oc with BioStar Tforce6100-939, some SuperTalent CS2, ZALMAN CNPS-7000B-CU LED, WD 2500KS, and X-Qpack SFF Case. :banana:

CABYE 0540 FPAW from www.chipsandmemory.com - will have to call or email to setup, he has only a few more currently.

:lsfight:

Be sure to let us know. I want to get nearly that exact same configuration in the future.
11-15-2005, 09:21 PM
NYCTeeN82

Got a CABYE 148 0540 FPBW & DFI Lanparty UT NF4 SLI-DR today from Newegg. OCCT passed 2860 @ 1.36V (max temp 43). Will keep pushing.

Anyone know the solution to my CPU-Z throwing up a message that many of the information will not be available? I have to close and restart it and then it shows everything.

Also when I start MaxTCase, in the "maxtcase" field it says "could not locate the on-die memory controller". Anyone know the solution to this?
11-15-2005, 09:49 PM
shimmishim

This is what I got after I redid my fan setup on my water setup.

http://www.johnshim.com/forums/xtrem...ft0530apmw.jpg
11-16-2005, 12:37 AM
skogkatt

1 Attachment(s)

Stable point before going further...
http://www.xtremesystems.org/forums/...id=39929&stc=1

I'll install en external probe on the CPU to measure temps, because I think they're raising very quickly, and I usually don't trust internal diodes...
11-16-2005, 01:09 AM
Starman

Question to you opteron overclockers. sorry if it is a dumb question but ive been very interested in this boom of opteron overclocking. If i were to overclock one of these to say 2.8ghz (fx-57), would it technically game like a fx-57 or would it be different in any way? I would only buy one if i knew that it would game according to its clock speed. Thanks very much
11-16-2005, 01:19 AM
Jupiler

Quote:

Originally Posted by SPivX

hey man, nice OC! what batch numbers? i hope i will get my two CABYE 0540 FPMW with batch 0001 and 0230 tomorrow :slobber:

#194 and 434.

This one is the 434.
Wasn't completely stable at 1.456V though.
Prime errored after 3 hours.
Gave it 1.472V and priming for over 3 hours now. Will let it run for at least 12 hours today.
11-16-2005, 01:32 AM
MaxxxRacer

1 Attachment(s)

Just got my 146 today and here is where Im at. I will post a picture of the stepping in a bit. I tried up to 1.475X113% and was not able to get it to even boot at 3ghz.. 2.95ghz also seems out of reach. Really a pitty as I want to run my ram 1:1 at 300mhz.. ohwell.

http://img394.imageshack.us/img394/2121/29ghz1ji.th.jpg

http://www.xtremesystems.org/forums/...id=39930&stc=1
11-16-2005, 01:34 AM
alpha0ne

Quote:

Originally Posted by Starman

Question to you opteron overclockers. sorry if it is a dumb question but ive been very interested in this boom of opteron overclocking. If i were to overclock one of these to say 2.8ghz (fx-57), would it technically game like a fx-57 or would it be different in any way? I would only buy one if i knew that it would game according to its clock speed. Thanks very much

On an identical setup with same dividers ect it would be exactly the same as an FX57 ;)
11-16-2005, 02:12 AM
Viss

First results with me 146 cabye 0540 fpmw.

http://img.photobucket.com/albums/v2.../33001M800.jpg

http://img.photobucket.com/albums/v6...00small800.jpg

http://img.photobucket.com/albums/v2.../34501M800.jpg

http://img.photobucket.com/albums/v2...M3300small.jpg

http://img.photobucket.com/albums/v6...00small800.jpg
11-16-2005, 02:18 AM
alpha0ne

That is the best I have ever seen loc.o , congrats :toast:

Which board are you using :)
11-16-2005, 02:56 AM
dogsx2

[QUOTE=alpha0ne]That is the best I have ever seen loc.o , congrats :toast:

:confused:
11-16-2005, 03:12 AM
Pt1t

Quote:

Originally Posted by alpha0ne

That is the best I have ever seen loc.o , congrats :toast:

Which board are you using :)

it s with a Mach II :slap:
11-16-2005, 03:18 AM
dogsx2

Quote:

Originally Posted by Pt1t

it s with a Mach II :slap:

It must be a time zone thing in OZ :D
11-16-2005, 03:38 AM
MaxxxRacer

1 Attachment(s)

Well after some minor tweaking and pushing I got a 27 sec Super Pi 1m. Done with OCZ PC4800 elite plat.. great mem btw. does over 300 stable at 2.5-3-3-6.

http://www.xtremesystems.org/forums/...id=39940&stc=1
11-16-2005, 03:44 AM
Wiker

Wich conifg gives best redsult with 146 CABYE 0540 and DFI lanparty ultra-D.
BH-5´s 2x512 @ 260 htt 2-2-2-5 1Tand have a divider so that the CPU is going 310X10.
OR
OCZ pc-5000 2x512 310 HTT 3-4-4-10 2TWith no dividers
11-16-2005, 03:50 AM
dogsx2

Quote:

Originally Posted by Wiker

Wich conifg gives best redsult with 146 CABYE 0540 and DFI lanparty ultra-D.
BH-5´s 2x512 @ 260 htt 2-2-2-5 1Tand have a divider so that the CPU is going 310X10.
OR
OCZ pc-5000 2x512 310 HTT 3-4-4-10 2TWith no dividers

bh-5@260.......2t kills the OCZ
11-16-2005, 04:16 AM
Wiker

So i won´t loose any performance using the dividers?
11-16-2005, 04:19 AM
tatts

Quote:

Originally Posted by phadeout

Tatts,

Do they both have the IHS removed? It's possible the 148 is just as good, but has bad heat spreader contact compared to say perfect contact on the 146...

ihs are on both has the temps are low, the 148 loads @ 41C and i dont think taking the ihs off with lower my volts
11-16-2005, 05:40 AM
Evil

What to you think about 144 CAB2E 0542EPMW? Is it any good, i´d really like to know.
11-16-2005, 05:48 AM
tatts

the 0540 cab2e is hit or miss, some only get 2.6ghz some have maged 2.8ghz and is similar to a cabge imo
11-16-2005, 06:09 AM
187(V)URD@

Quote:

Originally Posted by tatts

the 0540 cab2e is hit or miss, some only get 2.6ghz some have maged 2.8ghz and is similar to a cabge imo

No, the 144 ~ 2.8ghz and the 146 ~ 3ghz
11-16-2005, 06:25 AM
Dani

146 CABYE 0540FPBW, +16h StressPrime 3050MHz 1.45V TT BigTyphoon
11-16-2005, 06:26 AM
tatts

ok, show me some prime stabe 144 cab2e's doing 2.8ghz plz without ridicolous volts, most do 2.6ghz - 2.8ghz and have only seen 2 over 2.8ghz but not sure they was prime stable
11-16-2005, 07:19 AM
Lastviking

Quote:

Originally Posted by Dani

146 CABYE 0540FPBW, +16h StressPrime 3050MHz 1.45V TT BigTyphoon

Nice ex you got there what batch? :) ,and idle /fullload temps.
11-16-2005, 07:25 AM
eva2000

time for some 2GB fun http://i4memory.com/showthread.php?t=1721

http://www.fileshosts.com/memory/ocz...C400EB_009.jpg http://www.fileshosts.com/memory/ocz...C400EB_022.jpg http://www.fileshosts.com/memory/ocz...C400EB_025.jpg

Opteron 146 CAB2E 0540FPMW with Corsair Hydrocool 200 water cooling
DFI NF4 Ultra-D R.AD0 704-2BTA
1x BFG 7800GTX with HeavyH20 modded bios @500(552)/1350 and 81.89 beta drivers
1x 160GB Seagate 7200.8 SATA NCQ hdd
Liteon CD-RW Burner
Floppy drive
510W PC Power Cooling SLI PSU

10x 306HTT = 3060mhz with 180 divider
@278mhz 3-3-2-5 7-14-2223 at 2.66v

CPUZ Validated:
http://valid.x86-secret.com/show_oc.php?id=50787

3dmark2003
@500(552)/1350 = 19,954
http://service.futuremark.com/compare?2k3=4406188

3dmark05
@500(552)/1350 = 8,905
http://service.futuremark.com/compare?3dm05=1448541

Super Pi 32M v1.40 mod

http://www.fileshosts.com/DFI/NF4_SL...rpi-32m_tn.jpg

Pcmark04
Score = 6,238
Memory = 7,308
11-16-2005, 07:52 AM
Dani

Quote:

Originally Posted by Lastviking

Nice ex you got there what batch? :) ,and idle /fullload temps.

Thanks!
Batch number does'nt mean anything, at least not how much it gonna OC :fact:
But 0357
FULL load +43ºC, ambient temp ~23ºC (+-1ºC)
11-16-2005, 08:06 AM
Kameleon

Quote:

Originally Posted by tatts

ok, show me some prime stabe 144 cab2e's doing 2.8ghz plz without ridicolous volts, most do 2.6ghz - 2.8ghz and have only seen 2 over 2.8ghz but not sure they was prime stable

http://premium1.uploadit.org/Kameleon/prime.png

CAB2E 0540 FPMW. I know it's not been priming for very long there, (I've been running Muon1 for more stability testing instead of Prime recently) but this chip is 100% stable at these settings, no matter what I throw at it. Hit an HTT limit now though, looking for a lot more out of my 146 :)
11-16-2005, 08:23 AM
MaxxxRacer

1 Attachment(s)

here is a nice stability shot with my ram at 290mhz... some rather excelent timmings. I will be working on tightening them up relatively soon.

http://www.xtremesystems.org/forums/...id=39944&stc=1
11-16-2005, 08:28 AM
alpha0ne

[QUOTE=dogsx2]

Quote:

Originally Posted by alpha0ne

That is the best I have ever seen loc.o , congrats :toast: :confused:

Yes mach 2 but look at the Vcore, IMO most important reading for 3 Gig no matter the cooling
11-16-2005, 08:50 AM
kapster

I have a 0540 CABYE FPAW from zipzoomfly. 1 day old.

http://home.earthlink.net/~sgallai/i...opteronoc1.JPG

just doing quick testing. but like the other FPAWs posted here such as the one from dnottis, I do not think it can do 3.0ghz.
11-16-2005, 09:24 AM
dimasdw

at last with Vcore 1.7　V , 18 C room temperature i can push my CABYE 0536 GPMW to run super Pi 1 Mb at 3 Ghz ,not good result but i am happy can run super Pi 1 Mb with 3 Ghz :)

<edited:sory mine not CABGE but CABYE...i wrote this post before i sleep :D >

http://img247.imageshack.us/img247/411/300x106yp.jpg
11-16-2005, 09:48 AM
TEDY

stay away from 1.7v i think too much voltage.
11-16-2005, 10:17 AM
tatts

Quote:

Originally Posted by Kameleon

CAB2E 0540 FPMW. I know it's not been priming for very long there, (I've been running Muon1 for more stability testing instead of Prime recently) but this chip is 100% stable at these settings, no matter what I throw at it. Hit an HTT limit now though, looking for a lot more out of my 146 :)

sorry but sp2004 for 1minute 30secs, my 146 can run it for that long @ 3.3ghz & is stable for benching gaming etc on 3.2ghz but fails prime after 5hours & now peed off, have to raise to 1.65V i think so i can brake 34,000 :slobber:

http://img439.imageshack.us/img439/2...mark8nh.th.jpg
11-16-2005, 10:37 AM
Lastviking

Quote:

Originally Posted by Dani

Thanks!
Batch number does'nt mean anything, at least not how much it gonna OC :fact:
But 0357
FULL load +43ºC, ambient temp ~23ºC (+-1ºC)

Only wanted to know the batch so i can se if it are a close brother to my 0239 :) , It seens to that the 400-500 batch are not good like <-400
11-16-2005, 11:02 AM
Monge

Quote:

Originally Posted by Lastviking

It seens to that the 400-500 batch are not good like <-400

I suggest you look/read this:
http://www.vr-zone.com/index.php?i=746&s=3

I think there's no sense in talking bout low batch numbers.
The cpu are sorted, tested/binned to be ie. Opteron 146, but from where on the wafer they came, I don't see how we can know.

Regards Monge
11-16-2005, 11:07 AM
Kameleon

Quote:

Originally Posted by tatts

sorry but sp2004 for 1minute 30secs, my 146 can run it for that long @ 3.3ghz & is stable for benching gaming etc on 3.2ghz but fails prime after 5hours & now peed off, have to raise to 1.65V i think so i can brake 34,000 :slobber:

http://img439.imageshack.us/img439/2...mark8nh.th.jpg

OK...so what would you like to see to prove to you that not every CAB2E is capable of no more than 2.8, or whatever ridiculous statement you made? I've got time, it's just a matter of running the benchmarks. I said I knew it hadn't been going long, that's because I was using my idle CPU cycles for something useful before I saw your post :rolleyes:

3DMark loops? Super-pi 32M? Prime (though prime is what sp2004 runs, so it'll be just as stable)? You name it, this chip is stable like this (317x9 @ 1.55v).
11-16-2005, 11:15 AM
tatts

first off, the guy said any 144 cab2e can hit 2.8ghz stable which is bs, ive seen alot stop at 2.6ghz and not many go past 2.8ghz stable (read before retaliating) :rolleyes:
stable imo is prime95 or sp2004 for 8hours+

Quote:

Originally Posted by Lastviking

Only wanted to know the batch so i can se if it are a close brother to my 0239 :) , It seens to that the 400-500 batch are not good like <-400

no offence but you make me laugh, you post on everything forum ive seen going on about these low batched number opterons your getting as if there going to get you a world record because your tech friend said low batch = good clocker, best bet is to just wait and see ;)
11-16-2005, 11:36 AM
Dani

[offtopic]
My best Venice 3200+ had batch number 1133, did 3.2GHz Prime95 stable for +11h.. :stick:
Other 5 3200+ had low batch, did'nt even near 3.2GHz Prime95 stable
[/offtopic]
11-16-2005, 12:04 PM
Jupiler

Guess I can call mine stable. :)
CABYE 0540 FPMW, batch 434.

http://users.skynet.be/MetalHead/146/3Ghz_stable.jpg
11-16-2005, 12:10 PM
Jupiler

Topic title has been changed to "Official Opteron ......."
About time, don't you guys think? :D
11-16-2005, 12:30 PM
Zeus

Quote:

Originally Posted by Jupiler

Topic title has been changed to "Official Opteron ......."
About time, don't you guys think? :D

This must be one of the most poulair threads of all time, don't you think? :)
Nothing unofficial about that.

Nice CPU you got there, mine's priming away at 3GHz now at 1.4V for over 3 and a half hours now, not bad.

Do you have your heatercore installed already?
11-16-2005, 12:34 PM
FlyBoyGeo

Hey guys, just got my hands on a 146 CABYE 0540 FPMW from ZZF.

Where does the batch number come from? Which line?
11-16-2005, 12:51 PM
computersmsa

First bench since few mounth for me :D

http://home.scarlet.be/~pascpiet/DV/SPI1M_3.2_267.png

Not really good time :(
Win SPI1 of Feb 2005, withoyt opti.
11-16-2005, 12:59 PM
Jupiler

Quote:

Originally Posted by Zeus

This must be one of the most poulair threads of all time, don't you think? :)
Nothing unofficial about that.

Nice CPU you got there, mine's priming away at 3GHz now at 1.4V for over 3 and a half hours now, not bad.

Do you have your heatercore installed already?

Thx.
You have a nice one too, congrats.

Heatercore will be installed within the next days. Will be on my P4 630 @ 4.2Ghz. Picking up my Nexxxos block (S775) tomorrow.
11-16-2005, 01:00 PM
Jupiler

Quote:

Originally Posted by FlyBoyGeo

Hey guys, just got my hands on a 146 CABYE 0540 FPMW from ZZF.

Where does the batch number come from? Which line?

Bottom line, last 4 digits.
11-16-2005, 01:45 PM
FlyBoyGeo

Quote:

Originally Posted by Jupiler

Bottom line, last 4 digits.

Thanks, mine is 0048
11-16-2005, 02:02 PM
Lastviking

Anyone more got this bug..and know how to fix it, when i´m runing mbm5 i got very high temp on cpu thats not are right temps. It also transfers the temp to smartguardian. When i´m only using smartguardian after a reboot a get the right temps and not 71c.

screen

nvm found the problem :)

http://files.upl.silentwhisper.net/upload3/tempbug.JPG
11-16-2005, 02:04 PM
Eagleclaw

Just got my Opteron 146 CABYE 0540FPAW batch 0062 from ZZF.

This is just a start but with my cooling don't know how much further I want to go. I will burn in overnight.

http://s88500732.onlinehome.us/opteron146.jpg

http://s88500732.onlinehome.us/opteron%20at%202800.png
11-16-2005, 02:12 PM
narjisse

is everyone getting Opty 146 CABYE 0540 from ZZF?

can't wait to see mine which comes from zzf tomorrow.
11-16-2005, 02:18 PM
Eagleclaw

From the 5 guys I have talked to that have gotten them this week yes...

Quote:

Originally Posted by narjisse

is everyone getting Opty 146 CABYE 0540 from ZZF?

can't wait to see mine which comes from zzf tomorrow.
11-16-2005, 02:21 PM
Garrett

Nice going Jupiler... I think you don't regret ordering them? ;)
11-16-2005, 02:34 PM
Jupiler

Quote:

Originally Posted by Garrett

Nice going Jupiler... I think you don't regret ordering them? ;)

Absolutely not.
Thanks to you, otherwise I wouldn't have found any. :up:
I owe you one. :toast:
11-16-2005, 02:40 PM
kakaroto

Hee jupiler, what are your load temps during Prime95? And what components do you use for your watercooling? (rad, block etc)
11-16-2005, 02:48 PM
Garrett

Quote:

Originally Posted by Jupiler

Absolutely not.
Thanks to you, otherwise I wouldn't have found any. :up:
I owe you one. :toast:

Hmm... you owe me one? LOL
Send your best clocking cpu to me ;)

I just can't superpi @ 3.2ghz..... 3190 max... ;)
11-16-2005, 03:01 PM
NWEng

Gotta crawl out of the Speak Freely every once in a while. I do like this chip, it's not going to bust any WR, but it's pretty decent. It's a CABYE 0528GPMW BTW.

http://img42.imageshack.us/img42/1239/untitled11pz.jpg
11-16-2005, 03:18 PM
flesheatinvirus

Thats great to hear,I picked up the exact same chip.
11-16-2005, 03:19 PM
Jupiler

Quote:

Originally Posted by kakaroto

Hee jupiler, what are your load temps during Prime95? And what components do you use for your watercooling? (rad, block etc)

Load temps are around 44-45°C.
Cooling :
Alphacool Nexxxos XP Bold,
Alphacool GP2X-A (ATI card),
HTF2-X dual radiator with 2*120 Revoltec blue fans,
Laing DDC Pro pump
Tygon 10/8mm tubing.

I think the IHS isn't seated that good, but I don't think I will take it off right now.
11-16-2005, 03:36 PM
Wiker

How much higher Will these 146 CABYE 0540´s go with a temp of -20 C ?
I am have a offer to buy a prometeia mach II for 250 $.
Do you think 3,5 ghz is possible?
11-16-2005, 04:00 PM
Eagleclaw

My load temps after a few hours of SP2004 are getting close to 60c

This is to hot isn't it?

It sure is bothering me even though it seems stable.
11-16-2005, 04:06 PM
kakaroto

Quote:

Originally Posted by Jupiler

Load temps are around 44-45°C.
Cooling :
Alphacool Nexxxos XP Bold,
Alphacool GP2X-A (ATI card),
HTF2-X dual radiator with 2*120 Revoltec blue fans,
Laing DDC Pro pump
Tygon 10/8mm tubing.

I think the IHS isn't seated that good, but I don't think I will take it off right now.

Thanks, OK I know it now. My single HWlabs Extreme isn't enough to support 7800GTX and this opteron. :p: My load is 51-52C at 1.48v. ...
11-16-2005, 04:52 PM
Digg

here my new Opteron 144 Tray CABYE 0542 FPMW:

http://mitglied.lycos.de/meinnamegeh...primelarge.JPG

tested with Abit AN8 Ultra and Thermaltake Sonic Tower.
11-16-2005, 05:14 PM
NYCTeeN82

So far it seems that 0540's are different, from worse to best:

CABYE 0540 FPAW
CABYE 0540 FPMW
CABYE 0540 FPBW

If anyone is interested, I got a 148 CABYE 0540 FPBW overnighted yesterday from Newegg. Their prices are decent too.

Mines doing 3003 @ 1.45V, it's a CABYE 0540 FPBW. Prime stable for 6+ hours so far. :banana:
11-16-2005, 05:23 PM
Eagleclaw

I know a few others with CABYE 0540 FPAW that are doing 3Ghz stable. I think mine can but not with my cooling but yes your list looks pretty close to what I've been seeing.

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 09:46 AM.

XtremeSystems