I see, thanks.Quote:
Originally Posted by MaxxxRacer
My sources just can't get anything right these days:D
OPP
Printable View
I see, thanks.Quote:
Originally Posted by MaxxxRacer
My sources just can't get anything right these days:D
OPP
What? server down :(
Thanks OPB. I was happy with my Neo2 and just purchased a 128mb GT 6800 too, now all thats going to change when this puppy is available.
I think the Vmem has to be the best design implication, for me that is a big PLUS for this board (and possibly future all DFI's? now they designed it). Vcore is Nice but not likely to be as useful IMHO
There is only one person I know that uses that much v-core.Quote:
Originally Posted by Jessfm
Tom Holck :D
He will be a happy camper with this mobo.
OPP
yeah when you go over 1.97v you go into dangerzone :)
Dont you think vDimm from 3,3-4,0 will be enabled after setting some Expert Mode or something. Seems strange with a spectra that starts as high as 3,3 volt.
Oh the Vcore will be usefull :D
Im not a guru like OPP to make my own cascades, im sure i would try if i got a FAQ/walkthrough (wink wink hint hint ;)), so untill further notice it will only be a VapoLS, around June. My chip isnt the best, but it should do some 3400 @ 2.1Vcore :)
Cant wait untill Venice :D
I don't make my own Cascades. PCIce makes my cascades.Quote:
Originally Posted by TS_PHI_PERRY_78
If I did make them, they would be the best:cool:
OPP :cool:
I've skipped over several mobos waiting to upgrade my A8V 1.02, this looks like a winner so far! :bounces:
:rocker:
The Dual Xpress Graphics Function supports the following:
Two PCI Express x16 Graphics Cards"
Does this mean X800XT in Dual mode? :banana4:
$299USD and they'll sell out faster than believed possible......
:(
C
WHAT ? :confused:Quote:
Originally Posted by charlie
Well I know Im gonna have one, and I dont care what it costs.Quote:
Originally Posted by charlie
so i can select 3.5vdimm to VX ram and it will be okay without any extra coolingQuote:
Originally Posted by Jessfm
would ocz 520w PSU be okay for that ?
Insane board!! I do need to get a rid of my MSI now and buy a DFI+PCI-E card(s).
Well im just looking for a place in sweden to preorder the mobo:
3500+ Winchester, OCZ PS 520W and a 6800GT is ordered. Just cant decide if i should change to a X850XT or not :(
Now the question is, which boards are ye getting?
http://www.xtremesystems.org/forums/...chmentid=22020
And it'll be worth EVERY penny.
The "Definitive" motherboard has arrived.............
Quote:
Originally Posted by Nube
OCZ 520W better be OK with it, that's what I have:D
OPP
Looks like nF4 SLI-DR to me :/
What is UT anyways? Obviously NF4 SLi-DR is better than UT NF4-SLI-DR as its the top model :|
Ut mean the board only,like any other mb maker sell
the normal lanparty come with everything,cable,pc transpo,etc
hummm I got a X800XT being replaced thats AGP I could trade that in for a PCI X800XT
two questions
1. would a X800XT pci card work on this??
2. my 3700eb is stable on my A8V at 3-2-2 @ 247 and 3-2-3 @ 259 with 2.8ish volts. What would you guess my EB could run with 4v avil to it???
1)The X800XT will work no problem.Quote:
Originally Posted by iboomalot
2) I don't think EB will like that much voltage, wild guess says around 280MHz with about 3.5V.
OPP
I want to see what it will do with the same parts Opp had in the neo2 the bh-5, fx55+x800xt at the same clocks in 3dmark 2001 ;)
I wonder if it will be as fast, faster or slower :).
What does: "Diagnostic LED connector" and "FronX" mean??
The cheapest I can't afford :mad:Quote:
Originally Posted by TS_PHI_PERRY_78
Diagnostic LED connector is probably something like MSI's D-Bracket leds. FrontX is a front bay device with all the handy connectors (USB, audio) upfront...Quote:
Originally Posted by Dirt
:YIPPIE: THANK YOU VERY MUCH FOR THE MANUAL :YIPPIE:
I'm sure that this will change the lives of many people...
Well..lets see about that. Specs are nice, but I have only seen 1 bench so far and it didn't give a clear picture. So we really know nothing about this board other than it has potential on paper ;)Quote:
Originally Posted by charlie
The only thing that makes me cheer atm is the fact that Oskar has been involved in the design :D
With the risk to be laughed at... who is this Oskar fella?
D O S: Okey. I need the DFI UT nF4 SLI-DR then :)
Oscar_Wu from some french forum right?
Well what about him?Quote:
Originally Posted by Kriller
Quote:
Originally Posted by Dirt
that I presume?Quote:
Originally Posted by Fewture
Well I got that part, whats so special with this guy??
What makes him special is he's a XtremeSystems Forum Member:DQuote:
Originally Posted by Dirt
http://www.xtremesystems.org/forums/member.php?u=5267
http://www.xtremesystems.org/forums/...earchid=196553
OPP
He is the DaVinci of designing overclockable boards.
280 @ 3.5v would be fine by me if it can hit it. were you thinking 3-2-2 or 3-2-3 on your guess???
hummm ***dreams about 360 FSB with a 4/5 divider***
ahh, good :)
the board for me is the LP-UT nF4 SLI-D or the LP-UT nF4 Ultra-D :)
(who the hell needs the silicon-raid-controller :rolleyes: - the nF4-SLI/nF4-U-chipset is sATA300-ready ;))
3-2-2, I know it can be done with one stick.Quote:
Originally Posted by iboomalot
280 may be really pushing it in dual mode:D
OPP
Good exponation, thnx :banana4:Quote:
Originally Posted by MIN_Roadkill
He's a genius and makes fast boards and biosses to go with it :D Basicly.. :PQuote:
Originally Posted by Dirt
hummm I might have to spend the money on this
I figure my X800XT @ PE+ speeds will work until the R520 comes out this summer and I bet this board should ROCK with future upgrades.
R520 this summer and trade my 3500+ in for a FX-55 after the FX-57 has made the FX-55's prices drop below 700.00 USD :D
Might not be close to OPP's Phase change super cooled monster but a 3ghz 1mb cache FX-55 with two R520s in AMR config will be a decent gaming rig at the end of the summer. :D
Quote:
Originally Posted by Kriller
Oskar Wu is "made in Taiwan" :D
same :banana::banana::banana::banana: ;)Quote:
Originally Posted by Onepagebook
LOL :DQuote:
Originally Posted by Onepagebook
Some spec of DFI LanParty NF4 SLI :
NVIDIA nForce4 SLI
CPU : Athlon 64 FX/Athlon 64
PCI Express : 20X
NVIDIA SLI Multi-GPU
Ports USB : 10
Disques durs : 4 PATA (UDMA133) + 4 SATA1 (1,5GB/s) + 4 SATA 2 (3GB/s)
RAID Morphing
Cross-Controller RAID
NVIDIA ActiveArmor
Native Gigabit Ethernet
NVIDIA Firewall
NVIDIA nTune
8 channel audio (Dolby 7.1 Karajan)
DFI CMOS Reloaded
DFI Genie Bios
Jumper to select SLI mode or not
http://img.photobucket.com/albums/v5...DFI-bridge.jpg
7.1 Karajan Sound :
http://img.photobucket.com/albums/v5...FI-karajan.jpg
http://img.photobucket.com/albums/v5...-karajan-2.jpg
First Screenshot @370@1T : / edit : not me :D
http://img.photobucket.com/albums/v5...set-FSB370.jpg
how high can the FSB go when the bus multiplier when set at 5x ???
I heard the a8v for example becomes unstable above 1150mhz
ouch 370 and only 7400 sandra those 6-6 clocks sure are hurting things.
what LDT did you use at 370?????
Just AWSOMEQuote:
Originally Posted by Zanr Zij
:slobber:
who can confirm that this mobo can lock PCI Express clock ? Thanks :)
I think the jumper would be bit different from the new version.;)
I think more importantly, 3-6-6 is not that necessary for everyone :D , from several conversations with oskar,
we all think that's just the confirmation that how high the fsb this board can reach.
As long as board can do stable @ DDR600~650 with CL 2.5, I think that's good enough.
maybe b'coz admin of dfi-street said that this mobo first release about Feb/ March may be June :D...Quote:
Originally Posted by Onepagebook
I too am glad about the 5v rail.
If the board can only use nvidia cards which was expected why the hassle of the massive jumpers? No other SLI board has this to enable SLI.
Quote:
Originally Posted by Kriller
:D
Nice board but i think i get a new aprilia rsv mille 04a instead.
Quote:
Originally Posted by Onepagebook
most Important in performance is Command Rate ( 1T ) and ratio of CPU Speed/ Ram bus... ( not be multi ) ... .Timing give increase about 3-5% at same bus...
Of course cas 2.5-x-x-y be better :D ( x < =4 )
nice board but too expensive... I am not ready to pay that much just for the voltages. I like the board layout though
yeah, now happy with MSI Neo2 because of price of it and PCI Express Dual Vid... Too Expensive... But maybe change in midle of this year.. :) or sooner if have money :D
Good choice :DQuote:
Originally Posted by Lastviking
Vcore 2.1v , vdimm 4v Im in love :banana4:
wow, no need for vmods!!
just fried my abit nf7-s 2.0 2 days ago when i slipped with a voltmeter before i was going to mod! RMA is my friend.
Dfi needs to do something based on a different chipset. people are not stupid. They want choices. The whole nvidia sli thing is such a gimmick. It's cool how it works and it helps games, benching etc. but the nvidia only thing is really a shame. Who knows, maybe by the time there are flagship pci-e cards from ati and nvidia, DFi will have a board that supports both cards for dual gpu rendering. :bday:
That board has pros and cons, but I am tempted ;)
I want that now :D