Tony,
Am I correct to assume this is based off the 3-29 beta for the Expert?
Printable View
Tony,
Am I correct to assume this is based off the 3-29 beta for the Expert?
Yes it is... read up a few posts....
can anyone post pictures of the bios? like screenshots? curious of how the thing looks like. and who actually gained a few mhz in there overclock? as far as i know this is still beta right? ain't gonna work 100% stable? anyone get any bugs?
The bios looks the same as all the other bios' Just 1 option is different in the DRAM config....its called Odd Divisor Correct. It is just below Tref instead of the Twcl setting, which was hidden in the other BT bios files anyway :)Quote:
Originally Posted by noktekniq
is this better then the oG 704bta?Quote:
Originally Posted by RyderOCZ
I have not tried it on my Ultra-D yet, but I have flashed my Expert to the 406, fixed a couple issues for me with that...I will have to flash the Ultra-D and let you know.Quote:
Originally Posted by noktekniq
BTW...there are 3 versions of this Venus, Expert, and Original NF4 to avoid confusion.
any differrences with this and the 704bta? or is it completely the same?Quote:
Originally Posted by RyderOCZ
It's based on a newer bios. How can it possibly be completely the same :rolleyes:Quote:
Originally Posted by noktekniq
I just flashed to it and it did not allow for SLI...for some reason the second card was not detected....uninstalled one card and rebooted...everything is fine...shutdown and install second card and is does not detect...any ideas?
In the Genie bios section underneat the voltages....what is displayed for your PCI-e lanes? 8-4-NC-8? or 2-1-1-16?Quote:
Originally Posted by millerdude
You have all the jumpers moved, right?
8-4-NC-8 and it's greyed out so I can't change it. SLI jumpers are correct...I just finished playing with the 704-2bta bios earlier in the day
Then SLI should be enabled, that is the right lane designation for SLI.
Where are you seeing that SLI is not enabled? When you re-booted after the flash...did something in Windows change?
I ran a 3d-05 and only got like 9200 as compared to the 14700 I usually get..checked the nVidia display properties program and looked for SLI enabled and it does not show that I can...there is not a box to check to enable
During post the detection page shows SLI enabled(page loads fast and you have to be quick)but it isn't....
Check the Device Manager and make sure the driver is seeing both cards, if not....Get drivercleaner from www.drivercleaner.net (the free version) and follow the instructions then re-install the drivers.
Something just confused the driver it sounds like.
Thats all it took....reinstalled the display driver and now everything works...flashing to this one effects the display driver somehow...
all is good...on to testing.....thanx
:rocker: :banana:Quote:
Originally Posted by millerdude
I have an expert too Ryder, can i ask you what type of DDR you have use on it?.. pehraps some settings can be change now and can perhaps give me better stability with my DDR and this DFI..Quote:
Originally Posted by RyderOCZ
man I dont have a floppy drive is there an ISO version of the new Bios?:confused:
flash with winflash then if you don't have a floppy. =[
Will try it out if someone here sais its better with the expert :)
Quote:
Originally Posted by Reinvented
or make a bootable cd-rom and flash from the hard drive/
this bios is giving me random reboots going back to 704BTA :(
Does anyone know if this Bios correctly identifies the FX-60 on the original SLI-DR?
sweet. will have to try this bios when i get some time.
Tony can you give me some tips on how to configure old school bh5 on expert?? (the alphas and dd and dds)