Nice work on all there Jin. I especially like the U2-UFO SS. I really am looking foward to ordering one in the next few months :)
Printable View
Nice work on all there Jin. I especially like the U2-UFO SS. I really am looking foward to ordering one in the next few months :)
That UFO sure does look familiar. ;) Thank you Jin!
A Perfect Circle FTW!!!!!
Very nice work, yet again Jin
Quote:
Originally Posted by jinu117
have you done any vmods to that board. do you get much vcore droop?
No droop mod, etc. it does fluctuate wildly on reading though... and even that is not consistant -_-. 1.625 set in bios could be anywhere from 1.55 to 1.63v on this board with presler. Funny thing is, there is no real consistant "droop" that I am used to seeing when I was playing with northwood...Quote:
Originally Posted by kayl
Bit of reworking on Weee's ss which sold to waffles :P Just quick enclosure on bench ss I had made last year sometime...
http://vapoli.com/images/Forum/IMG_8493.JPG
http://vapoli.com/images/Forum/IMG_8494.JPG
ah yes, I knew it well once, it was good.
I have a bat, I'll make sure you don't get there :slapass: ;) :DQuote:
Originally Posted by ProphetX
All the orders are progressing as it should :) If I am harder to reach right now, it's due to my main system down... (nothing new... typical dfi SDS on memory voltage regulator... bleh...) and I've been to Las Vegas for wedding over entire weekend starting from friday till last night :) There are 3 ss still waiting to be vacuumed and 3 that are charging, load testing, etc :)
Bit of update. Still waiting for controllers for the units that has controllers in them :) it did pass customs so i am wondering where it is now. Anytime now... or should have been anytime last week... heh.
finished up Vapor's SS repair from PC ICE.
There was micro leak in schraeder without caps on... (not sure why it wasn't on)... also, compressor was DOA. It was making... some interesting noise to say the least (and I heard matu:banana::banana::banana::banana:a before... so... i noticed anomaly).
Vapor decided complete revamp of system so only thing that got used was...
fan, some switches and PC ICE case (exceptional quality with thick aluminum... I like the case)...
My system looks small in this case but it still is bigger than what I put in lian-li to be honest...
Typical NF9FX, fast turning ac fan, chilly1 evap with new AM2 holes as well, tuned for best temp on 155-160w range. But with rear fan on can handle 200w no problem as long as your ambient temp doesn't go over 35c...
Some pics here.
http://vapoli.com/images/Forum/IMG_8717.JPG
http://vapoli.com/images/Forum/IMG_8718.JPG
http://vapoli.com/images/Forum/IMG_8719.JPG
http://vapoli.com/images/Forum/IMG_8720.JPG
Tomorrow I go buy box and few missing screws to screw the case in, and ship it out on friday :)
Nice -57c idle temps, what about load temps?
tnx
Evap temp (where in evap)? load tester temp? :P
Beautiful work jinu117. Please tell me about that black wrap on the main hose. What's it called etc. Thanks.
You can buy braid at http://www.wirecare.com :)Quote:
Originally Posted by qdemn7
Amazing unit Jinu.
had to sell my daughters racing kart to pay for my jinu v2000 ss system. but he does such clean work i can put up with her crying to sleep for a few weeks :)
j/k jinu, i just sold my wife but kept the daughter and racing kart :)
Jin, that's sweet....awesome work dude :slobber:
Guess I'm gonna be spending all day tomorrow insulating my P5W-DH :p:
About load temps...I have some figures that he told me, but I forget exactly where he measured them from on the evap...but here they are:
Ambient: varied between 29C and 36C (YAY SoCal!)
200W load evap temp: -28C (IDK the exact ambient for this test
150W load evap temp: -38C to -42C (depended on ambient, IIRC)
Anyway, I can't wait Jin :cool:
Sounds like a really nice unit Vapor :D
You've certainly got some nice ambient temps too :rolleyes: The phase is a bit colder over here in the North of England, but I can't remember ambient temps over 30c in the 5 years+ since I moved here.
Oh hey, cute kid Iross :toast: Love that 'thumbs up' :D
Jinu that PC ice rework looks good, and yeah that's a pretty long case. You sure you don't want to squeeze another compressor in there? :D I'm sure you get another one to fit with room to spare ;)
Cheers
Gray
Typically when i use thermocouple to test loaded evap temp, it is on side of evap about 4-5mm away from surface of evap. I prefer knowing colder temp closest to heatsource for better tuning (lately I've been tuning more based on temp of the load tester to simulate how cool CPU will get and using my feel on suction line- gotta love the groove of suction line-, etc)
when I am using froster, it sits about in middle side of evap. Due to size of the probe, I will have really hard time mounting any closer with the probe supplied :) For this evap, I know I can fake it and put it next to suction line for much cooler temperature reading but it just makes it harder to diagnose situation in case something goes wrong :)
Thanks for the comment guys... :) Yeah it got very hot over last 2 weeks or so. Perfect for load testing for conditions, but not so perfect for me to work on. Been working at night time and load testing during day (I just let it run and go sleep or what not... :P)
Hey Jinu, as long as you've got an evap with a decent thickness at the back, you can drill just a little into that, and place the probe just a little into the evap and use thermal paste on it to seal it up.
I've taken to doing that lately with the froster metal probes, mainly because it's a bit awkward on the side, and with Kayl's heads I can't use anything on the side at all.
I figure the temps will actually be more accurate there, as the column is one complete piece, and the side is actually just a brazed on tube, which will actually be having very little heat transferred into it.
Just a thought, and it let's you have a nicer finish with heatshrink on the sides.
Cheers,
Gray
Jinu did the controllers show up this week? Dont worry we dont expect you to work thru the 4th of july 4 day weekend but i was wondering if they did finally show up or not?
Thanks
Lee
Yes it finally showed up. Was going to work on today with load testing (final one only to have power outage... -_-).Quote:
Originally Posted by lross78550
It got so hot in house that we left to mall for "free" A/C lol.
Expect picture of units in few days once everything is ready to ship.
Bleh, I'd never get pics of the package :(
Ok... Got new batch of frosters in as well as 10 repair kits. Power went down today during mid day for 4-5 hours. Needless to say didn't get much done (we ran to mall... for free AC). But my day starts late in summer anyways :)
Here it is.
http://vapoli.com/images/Forum/IMG_8724.JPG
Also someone wanted pic of v2000 unit with Zippy 700w in... :)
http://vapoli.com/images/Forum/IMG_8722.JPG
http://vapoli.com/images/Forum/IMG_8723.JPG
I can get another 10mm by special request for people needing even more space on this... :)
What sorta disconnects are those?
Just regular ball valve, Doing triple evac right now. One of unit had some moistures from look of it.Quote:
Originally Posted by n00b 0f l337
PS) NoL, as I mentioned, when you get to last evac of triple evac, especially on high side, it is advisable to change to quick disconnects