low 23m SuperPI 32M and my new PB :woot:
i've also had a sniff of high 22m boys but it crapped out on me ;) half way through....really looking forward to phase.......i know it was benchable at 3350MHz.....but i hope my phase will hold its own at 3.4GHz :)
http://img147.imageshack.us/img147/4...hz23m171zn.jpg
haha damn you're a luck sob
this is the best CPU i've owned
12 Hour Prime Stable at 3.1GHz :eek: on air in low-mid 20C temps
http://img137.imageshack.us/img137/2...12hours4hu.jpg
congrats dinos22. very nice thread.
if only i had that kind of luck with my 165
thanks guys....eveyone asking about phase results so i guess that's the next stop.....see you back at 3.4GHz heheheh :)
must be waiting for me to join you LOLQuote:
Originally Posted by dinos22
that's it :DQuote:
Originally Posted by eva2000
Congrats Dino :toast:
waiting on higher clocks though
this just makes me more and more jealous each time:D
cleared the cmos today
and?????......this is one of the most suspenseful cmos clears in recent memory.......Quote:
Originally Posted by dinos22
heheheheh 11x multi is still there :woot: :woot: :woot: :woot: :banana: :lol:Quote:
Originally Posted by s7e9h3n
:woot:Quote:
Originally Posted by dinos22
I wondered why there was such importance on a cmos clear :clap:Quote:
Originally Posted by dinos22
dinos ya lucky bugger :D
Oh jesus more random multiplier unlockings, etc, lol.
Nice find, good luck w/it. Beastly chip.
Well, I'll be...
I've read from time to time about ppl's unlucked multipliers but never believed it until now..:slobber:
The "8M method" or should I say "accident"...how many has that happened to..?
..maybe I should lower my vcore and start chasing that crash..
:woot:
Nice 11x multiplier! :banana:
Next step is completely unlocking your Opteron's multiplier :toast: :D
heheh so what makes my one more believable than the rest of them hehehQuote:
Originally Posted by Clint
there's been a few instances of multis going weird....i know that G.Skill Tech has an opti146 like mine that has 11xmulti unlocked
i don't know why you guys are thinking the unlocking is crash related........i didn't get to do any testing to make it crash and unlock.......it was basically there first time i turned it on and went to bios............
CPU shipped in the mobo to me from another city...that could have something to do with it i donno............i did clear cmos before i started up as well....it's hard to tell what it was
btw that cmos i cleared while the mobo still had power....as in LED's were on but the mobo wasn't running of course....i don't know if that made any difference as i've done that many times before...........i really wish i knew......that way s7 would send me his nice Opti 154 for some unlocking action and 4GHz OCing :D
well i tried one of these
Adaptec 2100S Raid Controller in Raid0 with 2x18GB U160 15K SCSI drives with LVD converter = no difference in SuperPI perfomance from small amount of testing i've done
I was going to test non-hot swap drives and also raid0 sata150 drives but dang....i don't know if i should waste my time after this......there's hardly any action on the drives at all with 32M runs.....these SCSI drives have LED which start going nuts if there is any action.....
http://img150.imageshack.us/img150/8610/dsc025509le.jpg
guess ya had to try the scsi to be sure though :)
You won't see much difference since you're "only" running scsi raid @ u160 speeds. Sata2 raid should easily spank the u160 raid array anyday (try saying that 5 times in a row). Here's a crappy comparison - I've been told that HD Tach isn't a very good prog to test TRUE average read speed, but the results should be relative to their actual values. The Blue line is someone running an unoptimized? u320 raid0 array. The Red line is my Promise Supertrack 8350 PCIe Sata2 Raid controller with 2 x Western Digital Raid Edition 160GB drives in Raid0. I'll try my 2 x 74GB Raptor2's later this week and then hopefully 2 x 146GB Raptor3's when I get them. I was trying to find a better example of SCSI u320 drives in Raid0, but this was the only result in HDTach's database :rolleyes: :Quote:
Originally Posted by dinos22
http://img52.imageshack.us/img52/3707/hdtach9zc.jpg
BTW, there's a result from the same SCSI card as you have with 2 drives in RAID0 in the HDTach database as well, but if you thought the numbers were bad for u320, you should see this one
s7 who cares really
did you see any better times.....that's what really matters now :)
WTF is your problem? Obviously you were the one that cared, otherwise you wouldn't be trying this $hit to get a better spi time. You were wondering how come your scsi attempt wasn't helping your Spi results and all I did was explain to you why. What a fukin waste of time :rolleyes:Quote:
Originally Posted by dinos22