Great sticks you got there , congrats man
Printable View
Great sticks you got there , congrats man
if it is, how come i swapped to a 3200+ venice and had the same exact limit?Quote:
Originally Posted by nn_step
btw, i have since switched boards. it WAS the board holding me back :toast:
hmmm interesting.. I had a similar problem with my 3200+ claw.. changed it to 3800+ manny and gained an extra 20mhz :toast:Quote:
Originally Posted by ozzimark
well, claws are known to suck.. hahaha. i have one that won't even let me go over 230mhz with 2 dual rank sticks in :stick:Quote:
Originally Posted by nn_step
(though it can run one dual rank and two single ranks at 200mhz, 1T :confused: )
I change the last DFI oficial bios to 623-3, VOILA now I can reach 290 with my Crucial Ballistix PC3200 with 3-4-4-8 :banana: with 2,93 V
Wait, did you switch from or to 623-3?Quote:
Originally Posted by winters
i comeback to 623-3,
Got a new z503 set from Crucial today marked CL1116D.7M
part# 63240. I wish I knew what was under those spreaders.
They seem pretty good so far. Tried 290 first at 3-3-3-1T without breaking a sweat.
Mines do 300 but with errors in TEST Nº 8 in Memtest 86 v_1,65 what errors its related to this test ? I have a Venice 3200 Revision DH-E6...:confused: :confused:
As far as I know it has to do with voltage. For me, I've gotten errors in #8 cause I had too much volts going through my sticks <shrugs>
What you mean, need more voltage to eliminate errors on test 8 or need less ?
if he got errors from "too much volts", i think reducing the voltage helped :toast:Quote:
Originally Posted by winters
Congrats Cordovador.
Just ordered one X2 3800+ 0606APMW at http://www.trend4pc.de/product_info.php/products_id/633
I will post if the Chip is in my PC. But only Dualprimescreens 24.24 Custom FFTs in place. So far good luck.
And heres a List of the available Steppings.
http://www.trend4pc.de/media/products/AMD_Stepping.htm
In Trend4pc is where i picked up my X2 :DQuote:
Originally Posted by Rufus7
Grat results Cordo ;)
I was looking for a ballistix set of 2gb, but i'm quite afraid of the "instant dead", i'm not sure of what ram to buy, and probably i'll look for a HZ pair
What BIOS are you using at last???
I've seen in the DFI page an upgrade for the SLI-D (my board) dated at 6/april/2006 only 3 weeks ago, have you tested it???
salu2.
The new ballistix at Crucial seem to have been reworked not to have the death bug. As far as the bios, I have the April bios on a sli-dr with the crucial running at 285 1-1 at least.Quote:
Originally Posted by Dave338