Why are you drilling into the IHS and putting a probe in it :stick: Just put a thermocouple in the pot base and take the IHS off.
Printable View
Why are you drilling into the IHS and putting a probe in it :stick: Just put a thermocouple in the pot base and take the IHS off.
Who's doing that? Also, a probe on the cpu's IHS is a better measure of true cpu temps than a probe on the face of the evap. Of course, if you're unlidded, it's pretty hard to install a probe any other place.....Quote:
Originally Posted by afireinside
Got it. I think putting the probe between the layers of insulation should work good for me. Thanks. Drilling a hole which I can't do.. I don't want to void the warranty.. :)
I didn't drill any holes and I didn't even suggest to do that :confused: Did I post something about drilling a hole in the IHS and just don't know about it? :p:Quote:
Originally Posted by formyfaith
I looked at the pic again thoroughly, and found out it just looks like there's a hole at the side of the IHS. Just the probe sticking it's head out of those armaflex layers which kind of looks like a hole. My miss. :DQuote:
Originally Posted by s7e9h3n
yeap i thought the same thing heheheQuote:
Originally Posted by formyfaith
Oh, OK I get it now :slap: Here's a closer look at the probe:Quote:
Originally Posted by formyfaith
http://img79.imageshack.us/img79/698/closeprobe5za.jpg
i have to bow down to your OS tweaking abilities!
i have benched up to 3882MHz but the best time i got was 19:14s
haven't found the optimal maxmem setting yet, but im working on the OS to make as fast as possible.
Fx57 (0528), 2stage cascade cooling -98*c loaded evap temps @ 1.79Vcore
Congratulations on your WR!
Thank you esdee. :)Quote:
Originally Posted by esdee
Guess your's is a 0528 GPMW. I've never seen such a good 0528 like yours. Sounds really nice. Looking forward to your awesome results. :toast:
GJ fmf!
I have faith in ur os tweaking abilities...
Ive seen higher clocks and higher ram speeds and still u own em :)
nice chip..
Thanks.:)Quote:
Originally Posted by em4our
Yama-san's tweaks helped a lot. The copy-waza tweak works pretty good. Also, I'm not sure , but the real time process prgram kind of helps a bit, too. Moreover, think I'm getting more advantage from the mobo since not a lot of users are using the Expert for 32MB SPI runs, becuase of those incidents at the time of release. Was really scary. Though Expert has been serving me well. Thanks. :)Quote:
Originally Posted by Philosophy
Quote:
Originally Posted by formyfaith
yes its CABYE 0528 GPMW xxxxx500xx
you have pm ;)
http://img.photobucket.com/albums/v5...e/CIMG1842.jpg
also any idea why the expert is faster on 32m? the only timming i see that i can't do on the sli-d is the trtw=1 (for me it's 2) but from my experience it's not such a gain in 32m (unless it makes difference in the expert board)
Holy $hit - there it is....the second CABYE fx57 I've ever seen :toast:Quote:
Originally Posted by esdee
which is good or bad? :DQuote:
Originally Posted by s7e9h3n
so far i can do this. many tweaks on OS (win2k3 server 32bit)
http://img.photobucket.com/albums/v503/eedse/32m.jpg
mem timmings are
1-2-3-2-7-12-2-2-1-2-3684-1 async :7 - rp:3 icl:0
no matter what i do if mem speed exceeds 240Mhz i can't do trtw=1 tho
Just quick tested my TRTW1 on EXPERT, at least 264FSB with tight settings, did error @ 265FSB because I had 3.6VDIMMQuote:
Originally Posted by esdee
U got PM;)
Nice score thereQuote:
Originally Posted by esdee
i'd love to know more on this stuff :)
esdee, you need to find out what Yama-san's tweaks & copy-waza tweaks are. If they work well and you could get your cpu a little higher, we could be looking at a future member of the 18min club.
now you make me want to test an expert board :DQuote:
Originally Posted by Dani
you can find many tweaks here need.for.mhz gave some nice tweaks that i used too http://www.xtremesystems.org/forums/...light=fx57+ln2Quote:
Originally Posted by dinos22
im sure looking ;) 18m club is close ... :toast:Quote:
Originally Posted by moddolicous
oh man that tweak almost killed my OS.......i'm reluctant to try that again if you know what i meanQuote:
Originally Posted by esdee
It's Good - VERY GOOD ;)Quote:
Originally Posted by esdee
Crap for a sec I thought he had a typo and I was thinking that's a pretty good cabne 0528gpmw, better than mine was.... but it is a cabye!! Great time can definitely be improved! Makes me miss owning an FX-57 :).Quote:
Originally Posted by s7e9h3n
Hold on for a sec, I looked at your pic again. Never heard of a CAB'Y'E code 0528 GPMW either. ;) Now that explains why your's is such an excellent clocker compared to the CABNE ones.Quote:
Originally Posted by esdee
You got PM, too. :)Quote:
Originally Posted by Dani
So good to see people doing 32MB benches. :toast:
I've been feeling left behind. :D
Heeey....did esdee told you that this FX57 was a zombie and hipro make it alive again????And it was on a price like a 3500 venice....:D
Nice clocking for a zombie FX bought from ebay...:D
http://img.photobucket.com/albums/v5...e/CIMG1823.jpg
http://img.photobucket.com/albums/v5...e/CIMG1821.jpg
esdee has the photos of the repaired cpu
What a "many bananas" has happen to those pins :zombie: