fx57 2d runs with ln2

Printable View

Show 100 post(s) from this thread on one page

01-09-2006, 03:47 PM
dinos22

Quote:

Originally Posted by need.for.mhz

Double click on RegTweaks.reg and press yes to add it to the registry.

All tweak are applied at once, that's just a basic .reg file entry. You don't need to go through registry and change any values

are you running these on a dedicated benching drive..........i guess what i'm asking is can they be reversed aside from manually changing back.....and is there a need to reverse them after benching is done

what exactly are you tweaking there and how does it exactly imact on performance....have you actually got some proof this tweak works :)
01-09-2006, 04:03 PM
nfm

@dinos22

I always have those tweaks + many others applied, they're integrated into my unattended, mildly modified Windows install.

There's no need to reserve them back, I'm 100% positive that they won't hurt your performance or cause any problems, although I haven't comapred pi scores between normal x64 windows vs. tweaked x64.

Some of the tweaks are taken staright from Server 2003, the main purpose of those tweaks is to maximize usage of RAM while minimizing usage of HDD. That is really important for good pi score.

I always run 16k couple of times first, let's say you run 16k for the first time and get:

1st run: 0.203sec
2nd run: 0.203sec
3rd run: 0.188 sec
4th run: 0.177 sec (aha, and now you run 1m or higher Xm calculation)

When doing that superpi app is freshly loaded into the RAM and ready to be used (It's like a template in a RAM for a app), you have to act quick.
01-09-2006, 04:47 PM
200%absolut

really close to 4Ghz benching that's really amazing :woot:
01-10-2006, 01:06 AM
s7e9h3n

Quote:

Originally Posted by k|ngp|n

I almost had a 1m pass at 3980 but it errored out loop18. mem controller seemed to error out alot after that point, so I just went for a safe run before shutting down so I could at least get a decent 1m score.
I suspect pi doesn't put quite the load on the processor that 3d does and the cold bug trips quicker giving rounding and converg errors

Sounds more like you're reaching the limit of the cpu ;)
01-10-2006, 03:26 AM
Donni

955xe@6609MHz

19.953s

http://www.nordichardware.com/news,2800.html

:D ;)
01-10-2006, 05:06 AM
k|ngp|n

Quote:

Originally Posted by s7e9h3n

Sounds more like you're reaching the limit of the cpu ;)

How much you want to bet on that my man ;) ?
I did run superpi at 3996 no problems...

Quote:

Originally Posted by Donni

955xe@6609MHz

19.953s

http://www.nordichardware.com/news,2800.html

:D ;)

Thats a nice accomplishment by crotale :toast:
but really what does it have to do with this thread AMD FX superpi lol?
01-10-2006, 05:10 AM
dinos22

Quote:

Originally Posted by s7e9h3n

Sounds more like you're reaching the limit of the cpu ;)

you're really starting to freak me out with all the winks.....are you a mind reader or did Jesus send you down to see what we're up to these days heh.....*Jesus, the fools are overclocking silicone. They need to be put down quick. :D *
01-10-2006, 05:33 AM
Evil_Spork

someone get this man a tweaked iso of win server 2k3 haha

i wanna see 4gig+ sub 20s amd superpi 1m here.
01-10-2006, 05:42 AM
k|ngp|n

Quote:

Originally Posted by Evil_Spork

someone get this man a tweaked iso of win server 2k3 haha

i wanna see 4gig+ sub 20s amd superpi 1m here.

hehe..I will run on a fresh install of 2k3 fully tweaked and optimized for superpi "as good as I know". 4gig Sub 20's should happen...I hope :)
Im also playing around with some ramdrive apps...
.2-.3 sec in 1m and maybe 2-3 sec in 8m is all I need.
01-10-2006, 05:44 AM
Evil_Spork

Quote:

Originally Posted by k|ngp|n

hehe..I will run on a fresh install of 2k3 fully tweaked and optimized for superpi "as good as I know". 4gig Sub 20's should happen...I hope :)
Im also playing around with some ramdrive apps...
.2-.3 sec in 1m and maybe 2-3 sec in 8m is all I need.

you might look at a gigabyte iRam. 4 gig drive using ddr ram. with an sata interface!

4 gigs is plenty of room for a benching install and those things are FAST!!

fake edit: you can even get 2 and put them in raid0 for 8 gigs of ULTRA fast hdd. if i had the money i would do this... imagine the speed!!!!! booting windows in like 9 seconds?:eek:
01-10-2006, 05:54 AM
crotale

Quote:

Originally Posted by k|ngp|n

hehe..I will run on a fresh install of 2k3 fully tweaked and optimized for superpi "as good as I know". 4gig Sub 20's should happen...I hope :)
Im also playing around with some ramdrive apps...
.2-.3 sec in 1m and maybe 2-3 sec in 8m is all I need.

Less than 4MHz from the magic 4!
Very impressive work k|ngp|n!
01-10-2006, 05:57 AM
Evil_Spork

Quote:

Originally Posted by crotale

Less than 4MHz from the magic 4!
Very impressive work k|ngp|n!

and from what hes winked, i gather 4ghz has been done already, he just hastn posted it:D
01-10-2006, 06:24 AM
Waus-mod

Would you think so evil :P hahaha i think 2
01-10-2006, 07:11 AM
LardArse

Inhuman... and inhumane thing you're doing to the cpu here!
Just that bit mroe to the holy grail of FX57 benchin... :toast:
01-10-2006, 08:47 AM
k|ngp|n

Quote:

Originally Posted by LardArse

Inhuman... and inhumane thing you're doing to the cpu here!
Just that bit mroe to the holy grail of FX57 benchin... :toast:

thank you very much shamino.

btw--forgot to say that the IHS HAS NOT been removed yet :)
01-10-2006, 09:05 AM
lawrywild

Quote:

Originally Posted by need.for.mhz

Double click on RegTweaks.reg and press yes to add it to the registry.

All tweak are applied at once, that's just a basic .reg file entry. You don't need to go through registry and change any values

is it only for a64 users yeh?
01-10-2006, 09:08 AM
lawrywild

Quote:

Originally Posted by k|ngp|n

thank you very much shamino.

btw--forgot to say that the IHS HAS NOT been removed yet :)

how much gain do you usually get from removing IHS under ln2 :p:

and that is truly amazing KP :slobber:
01-10-2006, 09:25 AM
Jort

mhh can improve ~50 mhz and lower die temps:)
01-10-2006, 09:27 AM
lawrywild

Quote:

Originally Posted by Jort

mhh can improve ~50 mhz and lower die temps:)

4046 mhz 1M :slobber:

4ghz 3dmark05? :slobber:
01-10-2006, 10:04 AM
DesertShooter

Pop that IHS off:banana:
01-10-2006, 01:54 PM
Evil_Spork

Quote:

Originally Posted by DesertShooter

Pop that IHS off:banana:

thats a scary thought... then this golden FX would be naked and the core could get chipped sooo easily!! :(
01-10-2006, 02:36 PM
Altieri

Appears as though I am going to be needing new pants after reading this thread, k|ngp|n! Excellent work!
01-10-2006, 04:06 PM
[XC] moddolicous

Without IHS the cold will be directly on the die. Instead, maybe look at that thing OPB had. Its like an all copper IHS thats thinner than the regular IHS. Sub 20's on an FX will be near impossible. 20's might be acheivable, especially if he can run 14x 286, but that will be near impossible. Maybe 15x 265.
01-10-2006, 04:31 PM
Charles Wirth

Awesome stuff, just be carefull with that golden chip.

So close to my 1M pi too but I got you by over .1s ! heh
01-10-2006, 04:39 PM
afireinside

Quote:

Originally Posted by need.for.mhz

hey k|ngp|n

I attached all regtweaks in 1 file that can speed up calculation. I included one of the most important ones ;) All tweaks are labeled inside, oped with something like notepad to check them out

will work on xp, x64 xp and servers, server 2003

That's only 2.47kb. Unzip it and double click on .reg file, press yes to apply them and reboot. PM me if you want more.

I've never tweaked my reg for pi... How much do these help? I want to try these but I have no bench setup ATM, are they safe for a 24/7 gaming PC?

Show 100 post(s) from this thread on one page