OPB completed the self-challenge of BH-5 (512mbx2) doing 283x13 super pi 1m

Quote:

---

Originally Posted by M.Beier

Well, i've tested cas 2 and 1.5, about the same performance, but... I actually gained quiet a bit :) - And since cas 1.5 doesnt excists, I wonder why... - But it was like 2ns @ everest, but 0MB/s @ Sis, in PiFast / SuperPI it gives a desent boost :)
Tras = 0 is a major :nono: on my setup, it gives mega negative effect @ performance, we're talking 0.2-0.3 sec @ 1M
TRRD, never tryed less than 2, dont think it'll perform better :)

---

Don't look @ the settings as individuals. Try my timings as a group and then see if your theory hold true ;)

Quote:

---

Originally Posted by s7e9h3n

Don't look @ the settings as individuals. Try my timings as a group and then see if your theory hold true ;)

---

Oki, I'll try that then, only thing I wont do is ras to cas = 1 :P - Tryed declocking in order to do that, but its just not possible :rolleyes:
Going 2 bed now, was outside tryin' to reach 40k @ 01SE with a 3700+, x850XT, no vmods... - But sadly, the liquid froze on the heatcore and the temp @ GPU went from 1 deg C to 20 deg C, and 1M spi, no matter vcore / speed caused reboot... (was -6 outside, but I got some neat gear to make water reach amb :P)

are you gonna try ln2 on that non coldbug fx-57??

Heya Predator hows it going?

@ metro my guess is that he will not be using ln2 on this chip. Just a educated guess as he has no dewar.

Quote:

---

Originally Posted by ThePredator

These are the best UTT-BH performance ever ,also from the best master in hardware ever , :worship: OPB

saludos

---

I might try to go 12x300.. or 11x300 under PCICE cascade.:eek: :p: :toast:

nice UTT Kev..........very nice

any decent 32M times

Quote:

---

Originally Posted by Onepagebook

I might try to go 12x300.. or 11x300 under PCICE cascade.:eek: :p: :toast:

---

cool the mem to around 0c

As I know, Team has just got a excellent batch of BH-5 die utt, the best one can easily does 3.0v DDR500.. I am like ....:eek: :slobber:

Taht is just insane Kev. I can't wait till I gert the money to play with some A64 power. Working on a mobo deal soon then awaiting money for cou hehe.

Tim

How about ~310x12 1:1 @ 2,5-3-3-x for WR 32M run?

Quote:

---

Originally Posted by Onepagebook

As I know, Team has just got a excellent batch of BH-5 die utt, the best one can easily does 3.0v DDR500.. I am like ....:eek: :slobber:

---

hehe, and we all know you would love to have some of that. 250mhz with only 3v is nuts.. that should be good to what, ~280-290mhz at higher vdimm?

Quote:

---

Originally Posted by ozzimark

hehe, and we all know you would love to have some of that. 250mhz with only 3v is nuts.. that should be good to what, ~280-290mhz at higher vdimm?

---

One thing i have learn is that low vdimm and high mhz dont always mean they clock highest with high vdimm and good cooling, but its very nice sticks OPB have found.

Quote:

---

Originally Posted by Lastviking

One thing i have learn is that low vdimm and high mhz dont always mean they clock highest with high vdimm and good cooling, but its very nice sticks OPB have found.

---

Exactly, that all depends on how your memory controller can hold that high fsb on the high voltage.;), we will know on the Friday;):slobber:

Killer mem clocks as usual OPB :toast:

These are the results that i have at 3.05Ghz.. i think they are a bit worse than urs s7e9h3n (better time, but more mhz..), oh well, and kamprak too. Any suggestions?

http://img104.imageshack.us/img104/5255/xsorz9yq.th.jpg


Impressive results OPB, waiting for more :toast:

Quote:

---

Originally Posted by ZeroX

These are the results that i have at 3.05Ghz.. i think they are a bit worse than urs s7e9h3n (better time, but more mhz..), oh well, and kamprak too. Any suggestions?

http://img104.imageshack.us/img104/5255/xsorz9yq.th.jpg


Impressive results OPB, waiting for more :toast:

---

That's quite awesome considering your using an Opty and 2x256 vs my FX and 2x512 :toast: