kutteke
Translation
==
Did you test it right outside? Didn't the wind feel FREAKING cold?
Printable View
kutteke
Translation
==
Did you test it right outside? Didn't the wind feel FREAKING cold?
IvanAndreevich
У него толстое основание, кароче путь тепла очень длинный. Я Бартон свой (2706Mhz) гонял на 7000Ку и морозе...
AndreyZ
Да на открытом. Не сдуло, замёрз только.
LexHard
Ну чё в начале января учиним 2 попытку мегаразгона, уже на напруге 1.85 и морозе...
Смотри ка в Мировые Рекорды запостили Семпрон2600+ на частоте 3015mhz! Надо обогнать :)
Great work fr@me
I have only 3,05Ghz on my 2600+
http://valid.x86-secret.com/show_oc?id=60240
and Spi 1M on 2,9Ghz
http://img509.imageshack.us/img509/2...1mb29003ti.jpg
pawell262
Respect. What week?
week 37,
mobo DFI INfinity Nforce4, cooled by Pentagram Frezone 80Cu + Fan 120mm, for several days I chnge cooling and I hope i will overclock little more
Whats your week & processor was selected? Your processor is much better than my.
pawell262
week 28, OEM
So, who know russian, welcome to http://people.overclockers.ru/LiLiputo/record11 , especially fr@me.
now take a look at this baby.
this is 24/7 stable and benchable,
sempron64 2800+ @ 2726 mhz and 1.36 vcore
asus k8n4e deluxe bios 1010
geil one S 2.2.2.5 timings @ 460mhz ddr
asus geforce 7800 gtx extreme @ 480/1400
raptor 10k rpm 74gb
enermax liberty 620w
does anyone know how i can get an higher vcore on this board ? asus locked the voltage options when there's a sempy installed
I need like 1.5 or 1.6 volts.
LyP0
Do you use S&M?
MB Voltmod can help you.
What week?
I think you need to revert back to an older bios. Try 1002 or 1005. BTW nice oc on default vcore.Quote:
Originally Posted by LyP0
nice OC gj ;)
and also nice air cooling :D
@ fr@me
here is what is says on the hs
sda2800aio3bx
lbble 0540 mpmw
xxxxxxxxxx50005
i know voltmod can help , its actualy runnig at a lower vcore than stock,and i know a person who has amazing skills in that area, he can put a ram chip on the pcb again if it broke off. But i cannot find a mod for the K8N4 e deluxe. btw this is a bad rev. i've got the first one so i think it wont do 400 mhz ht. but it will do close to 1300 mhz htt speed, 1350 doesn't work.
I can get an rev 1.01 from i friend, this will do over 350 ht with my cpu but it i cant get it stable at even 2400 on that board.
and what do you mean with using s&m ?
@oicurafox2000
I think you need to revert back to an older bios. Try 1002 or 1005. BTW nice oc on default vcore. ???
I cant change the vcore in any bios, so why should i go back to any of those ? beter voltage stability ??
btw this is with an cnps7000A cu in a room on the attic, room temp appr. 21 C
edit : and yes i know a s754 runs better on 1x ddr than on 2x or even 3, but over here it seems to make no difirence. i can do 3x ddr ram at the same speeds, it wont go 1 mhz higer if i only put one in. The voltage is limiting this one, i realy need a changable vcore. Are there great biosmodders in the place ??
btw temps are 24 idle and 34 stressed
@fr@me
What board are you using at the moment?
If it is still the 8NPJ: What tweaks do you use, to reach this damn high FSB(HTT^^)? Was it not necessary to cool the mosfets? Are there now any mods for this Board?
Why don´t you use a 3100+? Because it has 256kb L2....
Sry, for my English
Alba
From my understanding,(I have this board,I've just been too lazy to mess with it) this boards earlier bios's supported changing the Vcore on the Sempron's,but they later changed that with the later bios's. Anotherwords,if you flash to an older bios,you might have the ability to change the Vcore. I might mess with mine a little this week. I have pics of the VDimm mod if you need anymore then 1.7V. to your ram?Quote:
Originally Posted by LyP0
LyP0
http://overclockers.ru/cgi-bin/files...=snm_1.7.6.rar
The best stress test. Use only FPU on 100% load.
Use 2 sides RAM
Albatroner
Record on Epox 8NPAJ. Now I use Abit NV8, the best mobo on S754.
2800+ has 256kb...
What makes the NV8 to the best S754 Mobo?
Alba
The best S754 mobo is my mobo. http://valid.x86-secret.com/show_oc?id=55250 Somebody finally showed me this what my mobo can do... this is the best OC somebody has ever gotten on this cpu I beleave. And it was with a Tforce6100 S754 keep in mind. But it is not my OC. I didn't get a cpu with a memory controler that good. 110% OC I just thought it would be cool to show.
3ghz on a Sempron 64 2500+ I really wish I had a cpu this good. The best mobo is more of a taste and of oppinion. Everybody has their favs. More ppl should get Tforces. They have know idea what they can really do. I call it the budget DFI killer. Why, well damn if i had a good mem controler I would have a OC like that. Now I really can't wait to get my hands on that venice S754.
@ frame
forbidden
cannot acces the ftp to download the file
and what do you mean by use only 2 sides ram ? i am running on a set of geil one, so that's 2 identical ram sticks, i dont use the third because my other ram is uccc and can't keep up with the ohter sh*t.And i run on 2 sticks because using only 1 stick doesn't provide a advantage so in this case is 2x 512 faster than 1x 512.
@ oicurafox2000
Do you happen to know what numbers of bios that were/are. and do those biosses support E6 rev sempron64 procs ?
Very nice OC fr@me!:clap:
LyP0
http://testmem.nm.ru/snm.zip
Ram chips locate on 2 side of plate. (sry for my english)
Serge84
What week?
Albatroner
http://images.people.overclockers.ru/49943.png
i wouldn't even dare trying volts like that on air here in hawaii:D 2757mhz at 1.63v's for me. i might try a suicide run when i get my 3700+ back from RMA(died at stock levels). if i fry the 3400+ i'll just get a 2800+ since they seem to be doing very well.
great job man. benching in the siberian cold is definitely xtreme dedication to overclocking, haha.
http://mb.zol.com.cn/23/233874.html Here is the website I found the OC on.Quote:
Originally Posted by fr@me
@fr@me
Whats the max Vdimm & Vcore Abit NV8 board allows? Have you got any vmods for this mobo? I need s754 motherboard with very high htt and I think nv8 is the best ;)
MaSell
Vdimm: 3,2V
But you can't change Tref, MAL and RP timings :( Only by A64Tweaker.
=> Much inconveniences with RAM overclocking.
Vcore: If 1,5 default, you can change to 1,80 and next to 1,95
If 1,4 default, you can change to 1,7 and next to 1,85 (not work).
What link for CPU-Z SEARCH 0,09?
http://img2.zol.com.cn/product/2_450...xPN15mKrcU.png
link for cpuz search - http://valid.x86-secret.com/search.php