"How's this for a 22minute challange?"
It is pretty good actually. :D Good job and nice chip. (damnit) [IMG]http://img357.imageshack.us/img357/4530/22m3rd6zl.jpg[/IMG] @Safeway,, yes, $1.19 / lb.
Printable View
"How's this for a 22minute challange?"
It is pretty good actually. :D Good job and nice chip. (damnit) [IMG]http://img357.imageshack.us/img357/4530/22m3rd6zl.jpg[/IMG] @Safeway,, yes, $1.19 / lb.
234 degree C??????? holy shiattt
It's a bug in SmartGuardian, it doesn't display subzero temps right.
Great run Coop, i really like your supertight timings.
Now if only i could find some TCCD that could run trcd-3 @ 310+MHz. :)
Thanks, I have another one here. It seems those Opti's can really get some work done. This is the most I can get from mine at this speed range. oh ya, :woot: [IMG]http://img353.imageshack.us/img353/983/3138b8gf.jpg[/IMG]
Nice run there coop, I'll have to take that one out with my new 0512 fx57 once I get up and running again (I've corrrupted my OS twice already) :p:Quote:
Originally Posted by coop
I just want to add, that coops's RAM is NOT running @ 241MHz (as CPU-Z shows). It's actually @ 261MHz... Multi x11 and div180 is a bit tricky and does not produce CPU/13 mem speed. It's is CPU/12. Everest shows correct speed but CPU-Z does not. I talked with Franck a while ago about it and showed him some screens to prove that. So far, nothing has changed...
Very nice run, BTW... I'm gonna try to top that :p:
@s7e9h3n, I'm sure you can, so I'm savoring the present. OR, is there an alternate possibility like "the future is now" ?? :D @bachus, I see what you are saying about the 180 divider now. Do you know if ClockGen has same issue?
I still haven't reinstalled my OS yet - but prepping my other DFI for phase since that might be the culprit, BUT SAFEWAY SELLS DI?????Quote:
Originally Posted by coop
... I hope this thread'll continue ;) My 3700SD is being shipped to me as I'm writing, Im sure gonna be able hitting the time (got some fancy cooling solutions..)
I'll hope some of my tweaks will pay off, time'll tell :D
Yes, usually by the office or deli. Nice 5 lb.blocks.
On 1/4" Corsair Hydrocool 200 water (30+ C ambient temps)Quote:
Originally Posted by coop
BH-5 vs TCCD
Well finally cracked 23m with winbond BH-5 ram and still have room to move :D As you can see from the times BH-5 was +20mhz faster equivalent at same clocks as TCCD i.e. 3102mhz BH-5 = 3120mhz TCCD
2x 512MB Corsair XMS3500C2v1.1 BH-5 on 166mhz divider
Super Pi 32M
@3000mhz at 1.44v = 24m 00.719s
@3102mhz at 1.536v = 23m 14.906s
@3120mhz at 1.536v = 23m 05.171s
@3141mhz at 1.568v = 22m 59.453s
@3150mhz at 1.616v = 22m 56.875s
vs
2x 512MB Gskill PC4400LE TCCD on 180mhz divider
Super Pi 32M
@3102mhz at 1.536v = 23m 23.735s
@3120mhz at 1.568v = 23m 14.547s
@3130mhz at 1.568v = 23m 10.297s
@3133mhz at 1.568v = 23m 08.500s
@3141mhz at 1.584v = 23m 05.891s
@3150mhz at 1.616v = 23m 03.531s
Damn, you've got me there by just one second! :clap:
Man you're running your TCCD way too slow, with your RAM collection there must be some sticks of TCCD that can run without a divider, aren't there?
Let's hope i can top that 22m56s of yours. :)
tried 18x pairs of 2x512MB TCCD from gskill, centon and patriot best is only
32M stable
2x 512MB Gskill PC4400LE @300-303mhz 2.5-4-3-6
2x 512MB Patriot PC3200XBL @305-306mhz 2.5-4-3-6
have 2x 512MB Gskill PC4800F but it's inconsistently semi-stable at 300mhz 2.5-4-3-6 and max is 301mhz only
You've gotta be kiddin me. :eek:Quote:
Originally Posted by eva2000
I've had about 13 different sticks and at least 50% of them did 300MHz, most of them even at 2,5-3-3-x
Best one was a OCZ plat rev2 that was stable at 316 2,5-3-3-7
My current kit is Gskill 1GBLE that i recieved from RMA, the kit i had to send back was stable at 300 2,5-3-3-7 but unfortunately one of the sticks started to generate errors.
How much voltage do you feed 'm?
Upon closer inspection, I have to admit it was quite a bold statement :lol:Quote:
Originally Posted by bachus_anonym
Unless, I can find some TCCD that can run 314MHz 6-3-3-2.5-1T :D, topping that 3138MHz/BH-5 seems not quite possible with TCCD.
286x11=3146MHz DDR572 6-3-3-2.5-1T - 22:59.625 - 2x512MB TCCD
Coop and Zeus, you guys are pulling some very nice times here! And George's 3141MHz with BH-5 is really fast as well :up:
That's hard to phantom, 18 sets and only 2 sets do 300+. I just bought and sold a set of Gskill FX that would do 308-310@2.5-4-3 for $145 shipped. Maybe I should have asked more, LOL :)Quote:
Originally Posted by eva2000
Was going to buy three sets of FX and try to get one killer but now you got me thinking it's not going to happen. :(
Want a set like Zeus has got. :D
Soon as i find a better pair, i'll sell these.Quote:
Originally Posted by dogsx2
I'll let you know. :)
Yesterday i tried 315MHz for 32M, but i couldn't get it to complete it. :(
Are you 100% certain about this? I'm not arguing as I have no idea for sure myself...never had a CPU with an 11x multiplier...Quote:
Originally Posted by bachus_anonym
According to Oskar Wu's oscillator tests, the divider resulting from the 11x multiplier and 180mhz ratio is CPU/13. However, 12 makes perfect sense as well...as at stock HTT, 11x would result in 2200MHz, 2200/12 = exactly 183 1/3 MHz, which the ratio technically is; not 180MHz.
I'm just curious about what your source is exactly. The 180MHz divider has bothered me virtually since A64's came out.
Heres an old ones :)
http://img287.echo.cx/img287/5320/screenshot0677rc.jpg
Anybody wanna try a 20-minute challenge? :p:
http://img464.imageshack.us/img464/8...x25532m8hx.jpg
I'm 100% sure that at multi x11, div180 is actually div183, which results in CPU/12, not CPU/13. I PMed Franck long time ago and he told me that div180 is "kind of unofficial" and he assumes div180, not div183.Quote:
Originally Posted by Gautam
My source is experience :D Also, e.g. take a look at coop's time @ 285x11 div180 (23:59) and compare it to eva2000's 314x10 div166 (23:59). Eva2000's result shows DDR522 but Coop's only DDR482. Both results are identical, therefore CPU-Z in Coop's case is wrong. I was having exactly same results when I was playing with my 3700+. I should still have some screenies somewhere.
Hehe, we are way ahead of you in that category (23min challenge), Dumo :p:Quote:
Originally Posted by Dumo
I wish I could, Steve... I'm out on that one :( I envy you that FX-57 now, a lot! Besides that, sweet result, man! :toast:Quote:
Originally Posted by s7e9h3n
Hey again guys, received my 3700+ SD, at 50-65 deg C on air, I ran 3051mhz, gonna get better cooling tonight, would you mind telling me which 1M time I shall bench at for the 32M run to reach the time, 26sek?
You can do faster than that with 0512...nice one :toast:Quote:
Originally Posted by s7e9h3n
Quote:
Originally Posted by s7e9h3n
http://webpages.charter.net/mlanter/57274.png
here is mine :)Quote:
How's this for a 22minute challange?:
http://img479.imageshack.us/img479/2...m22s32m7rn.jpg