G.Skill 2GBZX DDR400 2-3-2-5 Test

Printable View

Show 100 post(s) from this thread on one page

10-25-2005, 07:55 AM
GSKILL TECH

Quote:

Originally Posted by Dave_Sz

Wow, that's nice. Are they stable at 2-2-2-5? Try it at 8ns/5-6ns.

i will try it today :)

Quote:

Originally Posted by DocGigg

show do the HS do?

i think kakaroto done some test on HS before, i will do it later i believe. so busy, Newegg places a lot of order on 2GBZX today
10-25-2005, 08:28 AM
DocGiggs

the 2GBZX is back in stock at the egg as of this very moment. Pulled the trigger and ordered some.
10-25-2005, 08:36 AM
Jaco

Quote:

Originally Posted by G.S Technician

Yesterday my 146 became wried, and i think i need to a full test on 2GBZX

for 3G 200*15 DDR400 2-3-2-6, it is 5ns/5ns :)

http://premium1.uploadit.org/gskill/...est_200_01.JPG

how do you get a 15 multi with an opteron 146?
10-25-2005, 08:41 AM
GSKILL TECH

Quote:

Originally Posted by DocGiggs

the 2GBZX is back in stock at the egg as of this very moment. Pulled the trigger and ordered some.

today i will personally ship 30 pairs to CA LA's warehouse and ship out another 30 pairs to NJ's warehouse, so will be back to stock soon
10-25-2005, 08:45 AM
DocGiggs

I saw the older benchies by Kakaroto on the HS sticks.. those are listed in that thread as samsung UCCC as well. These are infenon ce-6's right? Hrmm. Both the HS and ZX are comparable in price but I went with the ZX's. Hope I made the right choice :)
10-25-2005, 11:51 AM
GSKILL TECH

all morning i am doing this.......
memtest test forever......

http://premium1.uploadit.org/gskill/2GBZX/2721zx.JPG

http://premium1.uploadit.org/gskill/2GBZX/2722zx.JPG

i get to say this one is above the average, maybe 1 out of 5, i tested total 5 pairs, average is around 260+-5 3-3-2-5, for $220- 2GB kit, it is very good.
10-25-2005, 12:25 PM
aicjofs

I asked in the Gskill forum but no one answered.

What is the difference between HX and ZX?
10-25-2005, 01:12 PM
Dave_Sz

I only need mine to do 246mhz, but If they do 270 and my CPU can handle it on the 183 divider, that will be awesome. We'll I get them tomorrow so I'll be tweaking like a mofo.
10-25-2005, 01:44 PM
DocGiggs

Quote:

Originally Posted by aicjofs

I asked in the Gskill forum but no one answered.

What is the difference between HX and ZX?

H series I think uses Samsung UCCC modules while the Z series uses Infenon CE-6 modules.

The second letter is their speed binned rating I think.
10-25-2005, 02:51 PM
quent

http://img475.imageshack.us/img475/516/gbzx2705tw.png

For test, no difference between 3/4/4/8 and 3/3/2/5 :confused:

Edit : I don't know why, but HX is wrote on CPU-Z information, ZX is wrote on Heatspreader :stick:
10-25-2005, 03:22 PM
GSKILL TECH

Quote:

Originally Posted by aicjofs

I asked in the Gskill forum but no one answered.

What is the difference between HX and ZX?

price is much different :)
i will tell you all, HX is not super good on OC
but 250 2.5-3-2-5 is very easy for HX

Quote:

I only need mine to do 246mhz, but If they do 270 and my CPU can handle it on the 183 divider, that will be awesome. We'll I get them tomorrow so I'll be tweaking like a mofo.

i said 246 should be ok for most the ZX
10-25-2005, 03:23 PM
GSKILL TECH

Quote:

Originally Posted by quent

For test, no difference between 3/4/4/8 and 3/3/2/5 :confused:

Edit : I don't know why, but HX is wrote on CPU-Z information, ZX is wrote on Heatspreader :stick:

it is very good result
i think they somehow burnt SPD wrong for 100+ kits....
not really matter, heheeee 210 -> 270 XD
i will inform taiwan tonight :)
10-25-2005, 03:26 PM
quent

Ok, HX is better than ZX ?
10-25-2005, 03:28 PM
GSKILL TECH

Quote:

Originally Posted by quent

Ok, HX is better than ZX ?

that was my typo, HX is not a super easy OC ram
but its chip is ,uch more expensive :)
10-25-2005, 03:57 PM
Stoner@Large

the ce-6 can go alot higher than 260 at loose timings. its got to be a B version.
10-26-2005, 03:15 AM
quent

Quote:

Originally Posted by G.S Technician

that was my typo, HX is not a super easy OC ram
but its chip is ,uch more expensive :)

ok, what was the better voltage for your modules ? Can I put more than 3.2v ?

http://img484.imageshack.us/img484/2364/timingd6bm.png

I'll use these timings, are they good you think ?
10-26-2005, 09:22 AM
Dave_Sz

Well, my ram seems to suck, terribly.
10-26-2005, 09:24 AM
GSKILL TECH

Quote:

Originally Posted by Dave_Sz

Well, my ram seems to suck, terribly.

what happened?
10-26-2005, 09:29 AM
Dave_Sz

It can't do 246 at 3-3-3-8, 2.8v, 9ns/7ns. Maybe I should try less voltage?
at stock it's ok with 2-3-2-5 7ns/5ns. I'll tinker with it. I tried your settings that you used at 250 and they didn't work either.
10-26-2005, 09:33 AM
Dave_Sz

Also I think I was right about the RMA thing, these had fingerprints on tem and a scratch or two.
10-26-2005, 09:33 AM
GSKILL TECH

Quote:

Originally Posted by Dave_Sz

It can't do 246 at 3-3-3-8, 2.8v, 9ns/7ns. Maybe I should try less voltage?
at stock it's ok with 2-3-2-5 7ns/5ns. I'll tinker with it. I tried your settings that you used at 250 and they didn't work either.

that is kinda weird, i use 702-1 bios. it seem fine to me.
try 200 2-3-2-5 2.7v 6ns 5ns level 7 / 3
let me know. i will check here every 10 mins
10-26-2005, 09:34 AM
GSKILL TECH

Quote:

Originally Posted by Dave_Sz

Also I think I was right about the RMA thing, these had fingerprints on tem and a scratch or two.

show me some pictures, i might need to talk to reseller.
10-26-2005, 09:38 AM
Dave_Sz

Pictures of scratches?
I'll post them up later if you don't mind. I'm going to start at 200mhz and work my way up for now. I should be using 7/3 for strengths?

Do you use yellow or orange slots?
10-26-2005, 09:40 AM
GSKILL TECH

Quote:

Originally Posted by Dave_Sz

Pictures of scratches?
I'll post them up later if you don't mind. I'm going to start at 200mhz and work my way up for now. I should be using 7/3 for trengths?

yea 7/3 works best for all my ram, but it might be different for yours. however i will try 7/3 1st.

scratches pics might helps me to talk to reseller
10-26-2005, 09:47 AM
GSKILL TECH

my msn is us.gskill.tech@gmail.com
welcome for anyone to join for "help" only please

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 09:35 PM.

XtremeSystems