Printable View
Quote:
Originally Posted by bachus_anonym
gigi he was talking about this post :p
" Do you have any idea how are those are doing on average? Did you test more than 1 kit of that New GeiL One SE PC4800? " in italian in u case u don't know "hai idea quanto fanno queste ram mediamente?hai provato più kits di queste nuove GeiL One SE PC4800? done
coz i wanna know also the answer i'm wondering if only power users getting those lucky tight rams timings/frequency :rolleyes:
Congrats on the new WR! :clap:
This kind of makes me wish I had purchased these instead of my FFs. But I doubt the retail versions (non poweruser/ES kits) of these can do 2.5-3-3-7 at 300+MHz. :rolleyes:
Nice results gigi. Whats the highest 32mb anyones ever gotten 2-2-2-5?? Maybe 280?
Congrats man! :DQuote:
Originally Posted by gigi77
Superb RAMs! ;)
I had two kits come through my hands, one does 300MHz@2.5-3-3-X@2.7v, the other needed to be at 2.5-4-3-X, albeit at 2.6v (ran up to 310@2.6v no worries though).Quote:
Originally Posted by TheMeatFrog
The 2.5-4-3 kit didn't get much more testing, so it is possible it was capable of 2.5-3-3, just sent it on it's way to it's owner though.
I've still got the "good" set, been trying to get 310MHz@2.5-3-3 32M stable this morning but ran out of time and had to go to work (damn bills!). I know it does 305MHz though.
I don't know how indicative they are of "normal" retail sets though.
congrats gigi....
stay tuned guys.....we have another italian WR killer.....but is quite shy and still waiting for account convalidation...
thanks my friends
luigi
Good work Gigi :)
congrats
Very nice memory you got there. I hope mine could also do above 300mhz at these timings :woot:
thanks ozan!
i just got a geil 1 set 2X512mb TCCD ...i can;t seems to run ddr600 at the default timings 2.5 4 4 7...it gives me errors on mem test 8 ...wonder y ....any 1 can help ?? i hving a dfi sli d board...bios 510-3
I have the 2x 256 MB Geil One TCCD set. At 312 MHz I can't do any timing tighter than 3-4-4-8. So yours sound normal.
Try and play around with the voltage a bit..Quote:
Originally Posted by kktham
Nice clocks! What's the date of the tccds...? Mine are 519, burning em in!
TCCD don't need any burn in, chances are the sticks will do even less MHz after burn in, especially at high volts. :nono:
Why should they clock less high if you burn them in??? Burn in is like, heavy usage... you're saying that when you use them in heavy load they clock less high, after a while, than when they're fresh out of the retail pack... Besides, when you're using under 3.0V with tccds + active cooling, I don't really see the chance of wearing them out
If you want it that way, see for yourself...
niceQuote:
Originally Posted by Zeus
clock :toast: my G.skill Fx 310 2.5-3-3-5 1T 32mb pass
Play with your bios settings. Let me tell you how I manage to take my geil one ram from 275 mhz up to 300 mhz with 2.5-3-3-6 timings. I use 702-3 bios and here are my timings :Quote:
Originally Posted by kktham
Tref 3072, bank interleave: enabled, Read/write bypass:16x, bypass max: 8x, max. async latency: 8.0ns, read preamble : 5.0ns, drive strength: 7, data strength: 2, decrease skew and skew value: 255.
You can set trc to 9-12 and trfx to 14-15, trrd:2, trp-twr-twtr-trtw:2
Quote:
Originally Posted by Ozan Baseski
u use at wat vdimm voltage?
I used 2.7 volts for this.
damn my pair of Geil sticks can't even do 2.5 3 3 6 at 300HTT after having similar settings like urs...tho i using the 510-3fix bios... hmm
Nice result OZAN,
i'am ready to 320mhz......
Ooooh nice, we're ready too.. :DQuote:
Originally Posted by gigi77
Doing some great work there Gigi. :toast:
@gigi77
Can u plz tell me wich bios did u used for this runs, or any other Geil One user? :)
A friend have this sticks wth an FX57 an stuck on 293MHz 2.5-3-3-7, one MHz more and i gives a reboot after Bios-Screen? Memtest works fine with 293MHz! :confused: