Printable View
Very quik test with systool , go to cpu oc and find max
All settings remains te same ( ram 3.2v ,CPU 1.42v)
Bios 5/10-2
Ram 1:1 ( 200 ) Find max ram
1M 246,73 HTT
2M 246,73 HTT
4M 245,97 HTT
Ram 5:6 ( 166 ) Find max cpu
1M 251,27 HTT
2M 251,27 HTT
4M 250 HTT
Bios 704-2bta
Ram 1:1 ( 200 ) Find max ram
1M 249 HTT
2M 248,24 HTT
4M 248,24 HTT
Ram 5:6 ( 166 ) Find max cpu
1M 252,03 HTT
2M 252,03 HTT
4M 251,27 HTT
Very nice job bigtoe :clap: :toast:
I used the 510-2FIX HellfireQuote:
Originally Posted by chinkgai
same voltage 1.55-1.56v
We are speaking of days :PQuote:
Originally Posted by IvanAndreevich
I wasn't stable until I used this bios. I wasn't able to prime more than 10min-55min with the 510-2FIX (and all the other bios). Right after I loaded the 704-2BTA bios it was stable :fact:
Thanks Bigtoe :banana:
In my case did'nt get 3GHz stable, 2955MHz was the highest stable in SP8M with 5.10-2 and 6.23-2 (fighting in many days)
Now today with 704-2BTA I can pass SP8M @ 3005MHz AIR cooled
Thanks BigToe :toast:
finally 2.7ghz stable @ 300htt and 1:1 :)
I lost about 150 3dmarks with the bt bios, going from 510-2, flashed back and got it again.
fareastgq, try flashing back to bta, then reinstalling drivers, then going at it
ok, thx, unfortunately my comp is about to be parted, sold my board and ram to someone else, when the new ati chipset boards are out is when I'll be getting another board, I don't wanna buy one now then have to get rid of it later. Till then, it's emachines celery backup rig. heh.
I need to try this BIOS, I hope I can make 300HTT stable with it.
Daved+, it's not the BIOS, it's your revision of DFI that dont let you pass +300HTT easy :(
I'll consider this BIOS...looks good.
Anyway, I forgot my floppy drive at home, does WinFlash work?
I used winflash np for this bios.
Don't f* kid me! I can't believe it! I sold my MSI Neo4 to get a DFI NF4 to get a higher OC and I got a bad revision? Is there any way I can fix it?Quote:
Originally Posted by Dani
my 'revision' seems to be different than many others as well as I cannot under any circumstances use the yellow slots like stated with the -2 bioses while many others get it to work without issue.
Thanks :DQuote:
Originally Posted by cantankerous
yellow slot are better with this bios even with low latency ram ??? :confused:Quote:
Originally Posted by cantankerous
I always use orange
Hmmm, my max OC, max single core stable and max dual core stable and mem OC all went down--maybe a bad flash? All dropped by exactly 30MHz :stick: (it's noticably colder in this room than where I set my old benching room)
Overall good results with this bios. After hours of testing I was able to increase my cpu OC by 11 mhz. For the memory I saw no increase but I did gain a bit more stability in the yellow slots. Before the Orange was a bit better.
So people are getting 1 more MHz on the HTT? LOL :)
I would really like to use the yellow slots as they seem to be getting more and more reputation in a good way. I have no clue why my board won't them but I don't think I'm wrong in saying that silent revisions have been done to these boards during manufacturing as results very greatly from some boards to others depending on build and purchase date.
What revision is your mobo?Quote:
Originally Posted by cantankerous
just curious as to how this bios is different from the 704-2bt
bigtoe or anyone can to explain the new values in Drive Strength and Data Drive Strength with regard to old ones?
hi bud, check here
http://www.dfi-street.com/forum/show...9&postcount=74