You can try 1.76V @ 227X17;)Quote:
Originally Posted by s7e9h3n
0516 cold buggwed big time @-89.99C:( Maxed @277
Oops...I meant 227
http://img378.imageshack.us/img378/7...shot0594py.jpg
Printable View
You can try 1.76V @ 227X17;)Quote:
Originally Posted by s7e9h3n
0516 cold buggwed big time @-89.99C:( Maxed @277
Oops...I meant 227
http://img378.imageshack.us/img378/7...shot0594py.jpg
Why do 227x17 when I can run 250x15? :p:Quote:
Originally Posted by Dumo
http://img482.imageshack.us/img482/1979/15x2501m5vg.jpg
EDIT: OOPS, you edited your post....I thought 227x17= ~3750...disregard my spi run then lol.....
Anyone have a source or sources for any FX-57s that don't have the cold bug steppings? I'll take anything besides 0530, 0531, 0532, 0533.....
CABNE 0530 APMW with ser# Y95XXXX is less problem with cold bug and also can scale high Mhz. On the other hand CAB2E 0530 VPMW is the one that cold bugged big time.Quote:
Originally Posted by wkmgt
One thing though... cold bug is very dependent on individual cpu of same stepping too from my old experience with winchesters. I once got 3 cpus of same stepping with few serial numbers off and they showed widely different patterns of not booting up at different temp (even for single stage...) was worst time for phase changer in budget. I am sure same applies to FX-57 too.
I just received a 0532 MPMW and it's bugged -- big time. :( RMA, Bye Bye......
I'd wait for the FX-60 but it sounds like those are going to have the cold bug as well. If anyone has an FX-57, with good steppings, who is looking for a buyer, I'll take it!!:D
Hehehe - good luck getting a RMA'd cpu with no cold-bug. AFAIK, all the cpu's in RMA reserve are CAB2E = cold-bug. I may be letting go of my 0512 in a bit and I'll get in touch with you if I do ;)Quote:
Originally Posted by wkmgt
Please do. I'm getting a refund -- not another CAB2E CPU.....Quote:
Originally Posted by s7e9h3n
http://www.jpop.com/gocchin/0516.jpg
I'm still trying to work my way around the cold bug characteristics of my
0516... Definitely cannot cold boot with base temps colder than -60C (Fluke
52II). After a few bench sessions I may be off about my max HTT @ -65 to
-75C or so... I thought I could not go over 255HTT which rendered my 14x multi
useless but that may not be the case... I do want to test more but I have a "nice"
dual core arriving that will be going under ice for 3D benching this weekend
with my GTX 512's so for now I only have the initial results from my intial
session with this cpu:
With 1.76v -70.5C idle, -68C load:
http://www.jpop.com/gocchin/gocchin1941.png
Then what I thought was my max htt at 255 cause anything higher would
result in a non stop beep from the computer forcing me to manually restart,
hence the digicam pic instead of screen cap:
http://www.jpop.com/gocchin/gocchin22258.jpg
Nice results gocchin
Thanks Ivan, hope I can tighten things up like formyfaith's timings, when I switch to the Expert board (as long as it doesn't kill my cpu ;) haha)Quote:
Originally Posted by IvanAndreevich
Nice 0516 there Gocchin:toast: ...Did you try with ACPI multi yet?
B/way thi is one interesting info @ one those auction site, I guess some of those seller really know about the items taht they're selling:)
http://img456.imageshack.us/img456/3...shot0911js.jpg
If the ser# on those 0530APMW is Y95XXX then he's right.
I just got this Opty150 CABNE 0528GPMW that has a problem with its multiplier hardcoded, it shows as 182 with 11x multi max. So far no significance cold bug problem @-98.5C evap. temp or -63C cpu temp.
Heres a comparo with FX57 0516....
http://img530.imageshack.us/img530/8...teron210ed.jpg
http://img530.imageshack.us/img530/9...teron229zs.jpg
Ah, that's (was) dogsx2's bugged Opteron 150
Yep, its on its way to 500 cpumark and 3.8Ghz:) I play a guessing game.... which one it will boot with.....182 or 150.Quote:
Originally Posted by rick_fx
Almost 1.4Ghz overclock...not bad. I hope the same with any 0528GPMW FX57 with the right heat load.
http://img226.imageshack.us/img226/8...shot0930im.jpg
If someone have an good FX-57 that works good with CO2 above +3.6GHz, please PM me, have money to buy it from you today:fact:
CO2 ? :confused:Quote:
Originally Posted by Dani
Maybe he meant DI.Quote:
Originally Posted by biohead
I have a Cabne 0528GPMW FX-57, same as your 150 Dumo. does 3600 on a LS, and 3500mhz on an old Mach 1 bench stable :)
http://www.xtremesystems.org/forums/...ad.php?t=84953
Co2 cascade.Quote:
Originally Posted by biohead
Sorry guys, I mean DryIce=CO2:rolleyes:
I may have a source on some 0530 FX-57's.
Waiting to hear back from the guy. If the steppings are gooood....rut roh.
After this Opty 150, I am seriously thinking to get Opty 154....as an FX57 alternative..
If anyone here is looking to sell an Fx-57 with a cold bug, cheap, let me know. I'm looking for an FX-57 to watercool. Key word cheap. Don't care if IHS is removed, as long as it works.
Guys...just use pm for any trade info:)
Anyway the reason I think that Opty 154 will work ok. with xtreme temp is ....
Heres the start of Opty 150 with a "little" cold bug...Evap@105:)
http://img206.imageshack.us/img206/6...shot0993gp.jpg
CPU core temp. in bios...-64C
http://img206.imageshack.us/img206/6...shot1002wn.jpg
Set up in bios....
http://img206.imageshack.us/img206/3...shot1010vg.jpg
http://img206.imageshack.us/img206/9...shot1025bi.jpg
It booted in windows @-94/-59C in bios..