Yes.Quote:
Originally Posted by toledo
Yes.Quote:
Originally Posted by toledo
WTF ??? You have a magic OS , or i have a crap OS ......the only reason i can think . Assuming you are using Win XP , because Win 2000 is expected to be faster .Quote:
Originally Posted by mrlobber
It was a completely fresh install with a PCI video and a lot of services disabled. Not tweaked specifically for SuperPi, though, so maybe there were some additional milisecs in there :D
Well , i guess almost 2sec are a bit higher than milisecs :D . I need to find a resonable explanation for that . Assuming that your Windows instalation are no longer "fresh" are you still able to do 26s ?Quote:
Originally Posted by mrlobber
Even at 13x220 i can't reach you result at 13x215 .... :confused:
http://geocities.yahoo.com.br/marcel...dt-832x666.jpg
Actually, I've not had any time to play with Dothan at all since the moment I saw DDR Booster mysteriously not working on my P4GD1. However, before a couple of minutes, removed the jumpers from CT-479 (they were set on 533fsb previously), and completed a 26.844 sec 1M Superpi run @ 217x13 = 2821 Mhz (which were 20 mhz more than I needed previously for exactly the same time). WinXP was as fresh as before :D, the same stock cooling with the 70mm fan as I posted in the 1st post of the thread.
Also, monitored a 28+ min Superpi 32M run @ 2780 Mhz, but this was to be expected since a 2800 Mhz A64 can easily put out a 25 min one, and Dothan is not as strong there...
The hyperpath 2 disabled for me makes no difference , so i assume it was not working before also . Maybe i need to boot at 200+ to have it working .Quote:
Originally Posted by mrlobber
Could you please test with hyperpath 2 disabled to see what happens ?
32M uses more system mem (as opposed to cache), hence the advantage of the integrated mem controller kicks in...Quote:
Originally Posted by mrlobber
Beta Version 1007.002
Anyone knows about this BIOS??
Tried it, won't even boot....
Also, i tried a waterblock (aquagate.....:) but the BIOS went groovy (aquagate sensor gave me 22°C at the lowest fan speed....) giving me 120°C and -120°C... :p:
Tried it on a P4GD1 (previous was 1005 release)
Ce M 370J@2.35 (157 FSB)
2x512 Corsair 2-3-3-6
vodoo 3 PCI Card (X800XL waiting...)
Tagan 380W
Hmm, can you give exact link?Quote:
Originally Posted by Newbie_User
http://support.asus.com/download/dow...Language=en-us
that's it.....
RAM ratios....Aouch.....will try PC 4400
That's it...
've set the PCI-epxress frequencies to 90 Mhz....
And i can go up to 173 FSB (RAM@396 in BIOS so 183 i think....2-3-3-6)
2.59 Mhz
V Core is 1.40 v(temp is 50-53°C... :p: )
I flashed to the 1007 beta bios and now it wont even post :(Quote:
Originally Posted by Newbie_User
Gotta get hold of a regular P4 to flash back, god dammit.
Be aware the beta bios 1007 DO NOT support CT-479!
It sucks .....i thougt it was a version supporting CT-479 and locks working . :(Quote:
Originally Posted by stryg
Thanks God my Dothan system is disassembled right now so that I couldn't power it on to flash to the new bios :DQuote:
Originally Posted by stryg
Hmm, it seems Asus starts waving goodbye to the CT-479?Quote:
Be aware the beta bios 1007 DO NOT support CT-479!
Does not make any sense , unless they have a new mobo for Dothan comming, other than that would be stupid . Maybe the ct-479 support cames with the final bios release .....i hope so .Quote:
Originally Posted by mrlobber
We need a bios for the P4GD1 with multipliers!
All else would be down-right disrespectful of Asus to its customers.
We need bigtoe to pull some threads!
Trust me, they have ;)Quote:
Originally Posted by toledo
Didn't know that BIOS didn't support CT-479....
Had the same problem.....and back to Ce 2.66 Ghz....
Asus won't give any notes on the BIOS they release (especially the Bêta ones...)
I would be disappointed not to see the Yonah on my P4GD1....
Have benched and tested the Ce 1.5@2.59 Ghz...
Not so bad
CPUMark : 306
SuperPi 1.4 : 35.869 sec.
3DMark01 : 24576 (ATI X800 XL...)
YONAH..........!!!!
I already asked him ...... but . :( .Quote:
Originally Posted by stryg
Quote:
Originally Posted by Newbie_User
old news :D
http://www.xtremesystems.org/forums/...48#post1051048Quote:
Originally Posted by sangboy
just ordered my p4gd1 through this french website,international payment by direct transfer only,guy was very helpful.here's the linkQuote:
Originally Posted by 16floz470ml
http://www.webmarchand.com/a/liste_...ste_produit.htm
---------------------------------------------------------------------------
P4P800 SE(no mod yet)
PM750@2845ghz watercool
BFG 6800ultra@450/1.2ghz
2x256mb Corsair PC3500C2@2-2-2-5
2x36gig Raptors
OCZ DDR BOOSTER@3.6volts
OCZ Powerstream 520watts
Thanks for the info but I have made a deal with another forum member to get the p4gpl-x. I hope to have it soon. You have a nice rig. You should post some benches.
Quote:
Originally Posted by techtro
no problem,always good to know where you can get it also useful for others looking for that board.Already posting on overclockers.com.when I get the p4gd1,I will come and post benchies here.Quote:
Originally Posted by 16floz470ml
---------------------------------------------------------------------------
P4P800 SE(no mod yet)
PM750@2845ghz watercool
BFG 6800ultra@450/1.2ghz
2x256mb Corsair PC3500C2@2-2-2-5
2x36gig Raptors
OCZ DDR BOOSTER@3.6volts
OCZ Powerstream 520watts
fresh numbers with P4GD1/6800GT @ U and 2 x 512 Sanmax 339WF @ 2-2-2-4 @ 3.3v
Pi 1mb
http://img375.imageshack.us/img375/2...22242lu.th.jpg
Pi 32mb
http://img375.imageshack.us/img375/4...22242pv.th.jpg
cpumark
http://img375.imageshack.us/img375/8...22243ya.th.jpg
pifast
http://img375.imageshack.us/img375/9...22240yi.th.jpg
3d01
http://img375.imageshack.us/img375/7...22246bp.th.jpg
3d03
http://img375.imageshack.us/img375/6...22242si.th.jpg
3d05
http://img375.imageshack.us/img375/4...22242dg.th.jpg
aqua03 final
http://img375.imageshack.us/img375/6...37007wq.th.jpg
aqua03 details
http://img375.imageshack.us/img375/3...tails0t.th.jpg
bios
http://img152.imageshack.us/img152/7...bios2ej.th.jpg
Hmm, did some quick damage with my fresh XFX 7800GTX (basically put the card, installed drivers and went off) :D
19825 3dmark2k3 and 9168 3dmark2k5.
Both 3dmarks run one after another at 208x13 @ 2-2-2-5, 77.72 drivers, video card clocks at 515/1400 (don't ask the real gpu clocks as I've not yet investigated all those delta things :p: )
Does 4x512MB work on this board??