Printable View
gigi77 nice score there - Congrats :toast:
But could you make another 3DMark run with some 250-260 MHz@2-2-2-5(8). I`m very curious about how on-die low-latency mem controller works with low-timing RAM. Just wanna finally be sure what is better: high speeds/high timings or middle speeds/low timings.
Thanks
Yes Mr. Cooper
luigi
I have also recently received these modules and wanted to share with you all the great performance they offer.
The full pdf can be downloaded from here its about 190Kb so I could not host it here.
Here is an extract from my document.
Quote:
Summary of Results
As the memory is rated 1.5-2-2-5, I started with this first and achieved the following:
• DDR 400 1.5-2-2-5 @ 2.65v
• DDR 440 1.5-2-2-5 @ 2.65v
• DDR 450 1.5-2-2-5 @ 2.85v
And for 2.5-4-4-7 the results were:
• DDR 400 2.5-4-4-7 @ 2.65v
• DDR 440 2.5-4-4-7 @ 2.65v
• DDR 450 2.5-4-4-7 @ 2.65v
• DDR 480 2.5-4-4-7 @ 2.65v
• DDR 520 2.5-4-4-7 @ 2.65v
• DDR 560 2.5-4-4-7 @ 2.65v
• DDR 600 2.5-4-4-7 @ 2.65v
• DDR 620 2.5-4-4-7 @ 2.65v
• DDR 640 2.5-4-4-7 @ 2.85v
In order to use the settings of DDR 620 and DDR 640 I did have to drop the multi on the CPU from x9 to x8 as I did not wish to push the Vcore up further. So these results are compared slightly differently with equivalent CPU Ghz settings as you will see later on. Performance tuning is an art form and I am still working through getting more performance out of these modules. While the results are not presented here, I have been able to set some tighter settings, achieving DDR 600 2.5-4-3-6 @ 2.65v. I was also able to reach DDR660 @2.85v, see CPUz validation 25888, although I will need some time to stabilise at this point and probably need some extra cooling. Talking of stability, I am sure there will be comments about not running prime and for these tests, this was not done but as you will see SuperPi 32M was run for 300x9 2.5-4-3-6 1T and I have been running this configuration for several days 24/7 folding, gaming and other system intensive applications without a single BSOD.
for ncsa GO over 320/640 ddr!
I hit 330/660 but really need some extra cooling .. hence the Vapo is on the way :D
Have you guys tested the limits at 2.5-3-3 yet? I am interested to see if any of the top % of new TCCD can do 2.5-3-3 DDR600 like some older TCCD.
EDIT: Just noticed ianocean's post, pretty decent, anyone else try 2.5-3-3?
Not as yet, needed some time to work through the basics. But have now started to tune up a bit and seeing 2.5-4-3-6 but will update findings as we go along.
Any ETA on these or the BH Geil ONEs? I'm looking to pick up a set of both (definitely these...we'll see how much the BH ones cost).
Seeking this information ....
EDIT: I have been advised that the GeIL ONE have already gone to market and are available from local GeIL resellers.
The BH version is rated 2.55-3.80v :fact:
http://www.geil.com.tw/portal/product_GOW5123200DC.php
Holy :banana::banana::banana::banana: :shocked:Quote:
Originally Posted by ianocean
Hmmmm, what about online retailers? No place around me would have Geil anything (or any decent memory at all actually).Quote:
Originally Posted by ncsa
I have seen them on eBay... I guess the major e-stores will get there shortly, I guess as their procurment lines up
Looked at the eBay ones....they have 100kits of each? WOW. I'll definitely keep them in mind the next few days.Quote:
Originally Posted by ncsa
Geil ONE born to KILL
Luigi
http://img146.imageshack.us/img146/1048/235hl.gif
http://img46.imageshack.us/img46/171...escreen3dh.gif
Nice timings on the first screenshot Luigi.. But what about the voltage? And are you cooling your ram?
Regards, Martijn
1.66v for cpu
2.70v for ram
0 cooling for ram
cpu cooled by MachII GT
Nice timings and good voltages too. :woot:Quote:
Originally Posted by gigi77
So the MachII is going well .. yes :D
Thanks ncsa!
gigi77
Nice scores
Gigi77, which BIOS you this using ?
Which Latency Dram Drive e Data Streight ?
I have problems Geil Ultra X + Venice + DFI :(
http://www.xtremesystems.org/forums/...ad.php?t=67816
Sorry my Bad English
Thanks Friend :toast:
Wow these are much more amazing with these new screenies. Are there any information on the costs?
Hola,Quote:
Originally Posted by Marcelo C Souza
you install bios 623-3 ad go UP
set other 2.5-4-4-8!
test stabilty sistem
luigi
;)
Which adjust fine you use in memory ? Auto ?Quote:
Originally Posted by gigi77
Marcelo
:D Already anyone tested the BH version....... :confused:
http://www.geilusa.com/proddetail.asp?linenumber=69
:toast:
Where is this "One" sold and when will it be available?