"Grouper" first look

Printable View

Show 100 post(s) from this thread on one page

05-31-2005, 06:11 PM
babyelf

holy ... i see my next board droool
05-31-2005, 06:51 PM
13oost

:kittenhat :eek2: enough said
05-31-2005, 07:05 PM
EMC2

Quote:

Originally Posted by bigtoe

your asking for a lot there m8.;)

Never hurts to ask :D Worst that can happen is be told no ;)

Quote:

ATI gave me the figures although they are peak i feel. I can tell you under 100% memory load im only seeing 35C max on any component around the vdimm section.

Peak maybe... or maybe that inductor is taller than it looks :)

/curious cat mode on

100% load being what? 4 double-sided DIMMs @ Vmem? Mem Type? FSB? running?

/curious cat mode off <--- almost impossible :lol:
05-31-2005, 07:22 PM
Stuperman

Quote:

Originally Posted by bigtoe

It goes to the max Vid the cpu allows then you add the extra options to boost it up, so it depends on what CPU for max VID..IE newcastle allows 1.55v max ect..

so you can only go .05 V over stock??!?! or am I having a stupidity attack?
05-31-2005, 07:25 PM
ozzimark

Quote:

Originally Posted by craig588

Memory sticks are rated at something like 15-20 watts per stick of 512M, no?

i think it kinda depends on the stick, but i hope what you're saying is wrong.
also, it would help to know what voltage that 40A rating is at. for all we know, it could be 40A at 3v, which should be enough
05-31-2005, 08:09 PM
EMC2

Darn cat...

Digital enhancement :p:
http://img8.echo.cx/img8/7681/groupervmem1cm.th.png
No PNs on the semi's tho :(
05-31-2005, 08:22 PM
Zebo

So does ATI have better mem performance read/write like you said it would in an earlier preview?

I guess taste is personel but that cream color looks like snot, no thanks.

Here is where it's at:)

http://images.anandtech.com/reviews/...show/RD480.jpg
05-31-2005, 10:47 PM
Ubermann

Seeing that DFI's board will do Xfire without mastercard, do you think Sapphire's grouper version of Xfire can do it also ?
If the boards hit the street before the mastercards then all will rush to get the one that can do it without mastercard.
When mastercards comes to Sweden you guys in US is already running dual r520 or something.
I think..
05-31-2005, 11:07 PM
Sentential

I really like the adition of a MOSFET cooler with standard mounting pins.
06-01-2005, 02:11 AM
Squid_Spit

Looks fully packed with all the necessary options, but imo physically it looks pretty darn ugly.
06-01-2005, 02:16 AM
LoKi2k

omg! gimme more!

what is about the vcore? where is the max?
06-01-2005, 02:45 AM
Tony

max Vcore is +0.3V over max VID..its in the pics ;)

board color can change, the RD480 was black and red so Sapphire could end up using the same for this also.
06-01-2005, 02:51 AM
babyelf

lol bitoe.. the vcore +0.3V is not linked properly.. ..
06-01-2005, 02:57 AM
Tony

Quote:

Originally Posted by babyelf

lol bitoe.. the vcore +0.3V is not linked properly.. ..

weird...is now
06-01-2005, 02:59 AM
babyelf

Quote:

Originally Posted by bigtoe

weird...is now

:toast: :toast:
06-01-2005, 03:07 AM
alpha0ne

Quote:

Originally Posted by bigtoe

max Vcore is +0.3V over max VID..its in the pics ;)

board color can change, the RD480 was black and red so Sapphire could end up using the same for this also.

Leave the colour, I reckon its great :) something DIFFERENT for a change
06-01-2005, 03:11 AM
babyelf

Quote:

Originally Posted by alpha0ne

Leave the colour, I reckon its great :) something DIFFERENT for a change

i'm with him.. white is sexehhh
06-01-2005, 03:27 AM
eva2000

very nice Tony... getting moving on some ram overclocking ASAP :D
06-01-2005, 06:09 AM
EMC2

Quote:

Originally Posted by craig588

Memory sticks are rated at something like 15-20 watts per stick of 512M, no?

Attached is a little chart from my previous power allocation calcs for four 512MB DIMMs.
http://img8.echo.cx/img8/2193/vmempwr1rp.th.png
With a 90% efficient switcher circuit, worst case from the 5V rail would be ~19 Amps.

Peace :toast:
06-01-2005, 06:28 AM
Pressure

Quote:

Originally Posted by Ubermann

Seeing that DFI's board will do Xfire without mastercard, do you think Sapphire's grouper version of Xfire can do it also ?
If the boards hit the street before the mastercards then all will rush to get the one that can do it without mastercard.
When mastercards comes to Sweden you guys in US is already running dual r520 or something.
I think..

Without a Compositing Engine chip (this chip synchronizes the frames) on either of the graphic cards you will only be able to see half of the rendered images. In other words, the screen would just fllcker although benchmarks would still report a higher score or average FPS.

You will need a Master card for Crossfire to function properly.
06-01-2005, 06:36 AM
perkam

http://www.xtremesystems.org/forums/...id=31701&stc=1

4v VDIMM ON THIS CONFIRMED !!!!!!!!!!! :eek: :eek:

:slobber:

:slobber:

:slobber:

:slobber:

:slobber:

Perkam
06-01-2005, 06:48 AM
Tony

Whats with these venice CPU's, its real hard to clock TCCD with the one i have here?

2901T and over 300 2T both with good bandwidth, are peeps still having to run 2T with venice or was it just a bad week code etc?
06-01-2005, 06:51 AM
WeStSiDePLaYa

im tottally in love with the sink on the mosfets idea being the same as a NB. would be sooo easy to switch to better TIM, or even put a better hsu on there, or maybe even watercooling?!?!
06-01-2005, 06:59 AM
Tony

Quote:

Originally Posted by WeStSiDePLaYa

im tottally in love with the sink on the mosfets idea being the same as a NB. would be sooo easy to switch to better TIM, or even put a better hsu on there, or maybe even watercooling?!?!

Around six months ago ATI approached me for input with regard to what i would like to see on a motherboard. i suggested many of the features you see that are on this board. These included:

The ability to water cool the mosfets etc.
Well engineered Vdimm power regulation
VTT tweaks
Multiple voltage options
totally seperate clocks for PCIE, sata etc etc
and a host of other enhancements to create a "pure" enthusiast board ;). Now, its a board you have to tweak, but its really worth while seeing how you can dial in stability etc.
06-01-2005, 07:09 AM
FireDragon

THIS IS GREAT now just waiting for the DFI board!!!! This is going to be crazy and if you ask me drive NF4 into the ground!!!

Dragon

Show 100 post(s) from this thread on one page