NF3/NF4 & BH-5/BH-6/UTT - Highest stable clocks - REPORT IN !!!

Quote:

---

Originally Posted by bachus_anonym

All entries have been updated. Thank you!


@Clevor,

As much as I would like to add your result to the list, I can't. I need to see SuperPi, CPU-Z and A64Tweaker on one screen. Not just cropped seperate windows. I'm sorry :( If you could re-run it, then it's awesome :toast:

@chinkgai

linky no worky :D

---

Not a big deal :). I don't have the ram in the board anymore.

I didn't know you was supposed to open all those boxes on the same screen. But come to think of it, I guess that does work, and the purpose of that is to prevent cheating (though if you're careful, you can crop the shots and combine them).

I plan on upgrading my 120 mm fan blowing on the ram so I may get a tad higher with the same sticks. Above 267 the first two #5 loops are clean but all hell breaks loose on the 3rd-4th.

hey B_A

i dont know why the link doesnt work...i clicked it and it doesnt work but when i compare it with the link thats provided, they look exactly the same...and it works again...but just not when clicked from my previous post...weird!

http://pics.bbzzdd.com/users/chinkgai/superpi2620.JPG

try that..thx!


EDIT: OKAY I DUNO WTF IS WRONG :mad: , but i figured out how to make it work...when u click it, it'll say page not found...just click the "go" or "refresh" button and it should work

@chinkgai,

I added your result :) I just copy and paste the URL manually into address field and it works ;)

Thanks :toast:

Quote:

---

Originally Posted by chinkgai

hey B_A

i dont know why the link doesnt work...i clicked it and it doesnt work but when i compare it with the link thats provided, they look exactly the same...and it works again...but just not when clicked from my previous post...weird!

http://pics.bbzzdd.com/users/chinkgai/superpi2620.JPG

try that..thx!


EDIT: OKAY I DUNO WTF IS WRONG :mad: , but i figured out how to make it work...when u click it, it'll say page not found...just click the "go" or "refresh" button and it should work

---

They do that to prevent people from hotlinking images from their site

Repost

271x11=2984Mhz DDR542 3-2-2-1.5-1T 3.73v with 2x512MB Mushkin L II PC3500

http://img.photobucket.com/albums/v3...1x1132mbPI.jpg

These are very old sticks @3.5

Quote:

---

Originally Posted by HiJon89

They do that to prevent people from hotlinking images from their site

---

whats so bad about hotlinking? :confused:

bandwidth I guess...

so it takes more bandwidth for them if u hotlink rather than if u make a thumbnail of it? i didnt know that...

i think thumbs wouldn't prevent ppl from stealing their bandwidth and they pretty much don't like that.

Here are my results:

OCZ EL Gold BH-5
DFI NF4 Ultra-D
Winchester 3000+
Using 510-2 BIOS, with 5.0V line with yellow DIMMs

245 MHz with 3.2V,
MyGenie Settings:
2-2-2-6-1T-7-14-2-3-1-2-3120-A-E-A-0-L5-L2-7.0-F-5.0-016-D-16x-7x-D

I am going to run another session of ~12 hour burn-in with this speed and push further.

http://www.xtremesystems.org/forums/...chmentid=32135

http://www.xtremesystems.org/forums/...chmentid=32136

Here's mine.... forgot about A64 tweaker, but it pisses MBM off bigtime.

http://i7.photobucket.com/albums/y29...PIshowCPUZ.jpg

Hope thats good enough. I was doing other stuff at the time, so real SuperPi result left alone is 26m57s

9 multi, can run it @ 10 but was shooting for higher mhz, highest stable, cant go 1mhz more with more vdimm or losening timings.......oh well, could be worse

here i am:

http://www.arcor.de/palb/alben/20/53...3666643536.jpg

and an other one:

http://www.arcor.de/palb/alben/20/53...3630393339.jpg

2 x 512 mb Corsair 3500 rev 1.1 BH-5

Here I am. :D
http://img292.echo.cx/img292/6252/275fsb32mpi28sr.jpg

Quote:

---

Originally Posted by RAMMIE

These are very old sticks @3.5

---

We don't know if your on a divider.

Quote:

---

Originally Posted by ZderinS

Here I am

---

Smokin:D What memory is this?

Quote:

---

Originally Posted by G H Z

We don't know if your on a divider.


Smokin:D What memory is this?

---

Hi.Mushkin Redline 2x512 XP4000 :toast:

Quote:

---

Originally Posted by G H Z

We don't know if your on a divider.

---

Look at memclk frequency =200 in tweaker
Also check CPU-Z validation = 20042

@uwackme

IIRC, for that SPi 32M run *4x512MB of TwinMOS TMSP PC3200 UTT-BH5 (1A4T)* were used. Am I right?

@LoKi2k

Looking good there, but we need SuperPi 32M... ;)

@ZderinS

Grats for the best mem clocks. Superb :toast:

Quote:

---

Originally Posted by bachus_anonym

@uwackme

IIRC, for that SPi 32M run *4x512MB of TwinMOS TMSP PC3200 UTT-BH5 (1A4T)* were used. Am I right?

@LoKi2k

Looking good there, but we need SuperPi 32M... ;)

@ZderinS

Grats for the best mem clocks. Superb :toast:

---

Thanks Backus_anonym I wish another best mem clocks next time :toast:

Zafer brother very nice score :toast: (TR)

My chips is 50-D...twinmos UTT score 265 FSB 2-2-2-5 :banana: (TR)

VX PC3200 with hs on.
http://img.photobucket.com/albums/v6.../pic5small.jpg

Quote:

---

Originally Posted by ZderinS

Here I am. :D
http://img292.echo.cx/img292/6252/275fsb32mpi28sr.jpg

---

Excellent my man.. :slobber: I am burning... :slap:

Heres 4X512@2T and 3.6V...
http://img287.echo.cx/img287/5320/screenshot0677rc.jpg