Still dont know which one to choose for my Old bh5? Could someone advice me?
Printable View
Still dont know which one to choose for my Old bh5? Could someone advice me?
wondering same thing for BH-6 though 331-3 seems to be the recommended for that.
Ok so I've been using the 331-3 bios for the past couple days. When the Dram+ thing is enabled I get 2.66v when it's set to 2.6 and 2.63 when it's disabled. I've got TCCD ram so what version is geared toward TCCD chips?
My setup seems to be running smooth with the Dram+ enabled @2.6v giving me 2.66 in bios and 2.63 in windows.
:D 331-1: http://www.xtremesystems.org/forums/...ad.php?t=58277
:toast:
Your using BH-5 chips with that correct?Quote:
Originally Posted by HARDCORECLOCKER
meatfrog are you using 3.3v or 5v rail for your ram? I thought the +0.03v was only for the 5v rail?
so 3.31 for TWINMOS 1A4T ?
Ok since I'm a total noob I don't know what your talking about! :slap: [noob]How do I check what rail I'm using?[/noob]Quote:
Originally Posted by cantankerous
Do you have SingleSided or DoubleSided rams :confused:Quote:
Originally Posted by HARDCORECLOCKER
Did anyone ever answer this directly? I did see the following post re: some LA:Quote:
Originally Posted by Holberg
"I'm using 331-3 for my GSKILL PC4800 512LA and hit new high, rock stable at 326 1T 2.5-4-3-7, can crunch memtest, superpi 32m, and prime95 all day long, multiplier 8 and such high FSB were not possible with any other BIOS:"
TIA for any insight!
heheh meatfrog. Did you change the jumper in the upper right corner of the board at all to change what rail the dimms get fed from in terms of voltage? If you haven't changed the jumper you are using stock 3.3v rail to feed dimms otherwise a change would show you used 5v rail. If you are on stock 3.3v rail that is good news to be able to add the bit more.
LOL I thought that was what you were talking about. Yea I had it changed with my previous LA sticks and fried em so now I just leave it at stock 3.3. :) These LA sticks only need 2.6-2.7 anyways so I'm good to go! :DQuote:
Originally Posted by cantankerous
use 331-3 for your LA TCCD ;)
Is that the bios i want for bh-5? I'm using the official 310 now and have hit a wall with my ram. I can go up to 260Mhz 1:1 np but only 252Mhz 5/6. Voltage doesn't help either.Quote:
Originally Posted by TheMeatFrog
+0.03V works for all values apart from just 3.2V I belive. So works with the jumper set at 3.3V or 5V rail.Quote:
Originally Posted by cantankerous
:D I use CORSAIR 2 x 256 MB 3200LLPT v1.1 :p:
:toast:
So whats the best bios for 3200 REV2 TCCD and for 3700 EB?
Mcklain
You may try the 331-3 for this config, but the 316RS could be even better for your configuration... :)Quote:
Originally Posted by Dumo
Awesome! I've always liked corsair myself. :toast: I wish i had 2 sticks of those, then maybe i could get a little higher. I don't think my 2X512MB sticks will get as high as yours. :p: Will try the 331-1 bios then, thanks!Quote:
Originally Posted by HARDCORECLOCKER
new is 1.55, old is (1.51??)Quote:
Originally Posted by Charloz24
http://www.memtest.org/#history
Bug Fixes
* More precise detection of K8 Memory Freq.
* Some minor bug fixes.