ill try your timings arctic as VX should be similar to BH5, when I get back to 325 for further testing...
Printable View
ill try your timings arctic as VX should be similar to BH5, when I get back to 325 for further testing...
Quote:
Originally Posted by Radelon
That is good news. What timings did you run at?
Tested this one, but no go @ booting above 2900Mhzs, with 310 and 218 i can boot @ 3200Mhzs, memory always @ 166Mhzs.
try another multi, i did notice that this BIOS has somekind of RAM divider bug... :rolleyes:
i will give it another try tonight, thank you for the info Tony. :toast:
Tried from multi 11 to 9, cant boot above 2900Mhzs with any =(Quote:
Originally Posted by naelq
so this is also good for new TWINMOS SPEED PREMIUM 1A4T aka BH-5 ?? thanks
I am interested as well. Can you post an a64 tweak shot.Quote:
Originally Posted by xgman
musk
Could someone using TCCD 440 chips be so kind as to post all your memory settings. I only have the 4 major timings set in my bios and the rest set to auto so I could really use some help. I'm getting a memory reference error after playing CS:S for a while with this bios. Not a BSOD but just a little error message and then the game will crash. A screen shot of you A64tweaker or just a list of your settings would be greatly appreciated. Thx!
Quote:
Originally Posted by naelq
326 doesn't have that bug:)
but before Oskar's permission, I can't post 326. Sorry guys.:(
such a tease.. get Oskar on the phone! :)Quote:
Originally Posted by Onepagebook
Another host right here ;)
Hi
I cannot go over :confused: 3.2V Vdimm :confused: if i set CPU Vcore to Auto. :mad:
I need V-Core set to Auto in order to use Cool'n'Quite (Crystalcpuid).
I use CPU over VID Voltage to increas V-Core.
Can this problem be solved with an Bios update?
:stick: :banana: :stick:
With 3.2 Volt i am limitet to DDR440, with 3.6 i can go to DDR533 (2-2-2-7)
PLEAS HELP
Quote:
Originally Posted by OldMozilla
I think long times ago, someone mentioned about it:
If you wanna go over 3.2v, don't set your vcore as auto. :stick:
Can you set the cpu to something other than auto, reboot, set vdimm to 3.6 and then set cpu to auto?
Seems like it should work.
musk
:D Hey dude come on - tell OSKAR I've been waitin' for more than a month to get the damned board RMA'd - so he can do somethin' for the annoyed DFI community and get the 3/26 out of his pocket........ :stick:Quote:
Originally Posted by Onepagebook
:toast:
ohh, thank you for that OPB!! :D
until now, the 2.17 BIOS is the best stable BIOS for both my BH-5 & VX's, VX did 275MHz @ 2-2-2-5 & BH-5 290MHz @ 2-2-2-5 (which i couldn't see in any other version) both are Memtest86+ test #5 stable! :banana:
let's hope for a better BIOS ;)
Nice to see there is a new bios to play with. Gunner get another DFI board on saturday... a SLI-DR this time.
uhhh looks like 1T can be an option again......will wait for 3/26 though because this system runs quite ok at 250FSB 2T ..... what kind of voltages do U guys use (air cooled) for NB LDT and CPU .....my chipset didnt like much oc at standard voltage.
does this bios have memtest built in?also can I flash threw windows because my floopy drive isnt working for some reason.
I'm going to try this out later today. When flashing with WinFlash, which blocks should you update?
Come onnnn....:slobber: :DQuote:
Originally Posted by Onepagebook
enable Sli Broadcast Aperture + real player = crash!!
i found it out 5 min ago
I use 6800U SLi
Hi peeps,
just wanted to let u know that I had a bad flash with this bios last night. Used winflash, rebooted fine, but when I set my 24/7 settings I got a scrambled bios. Could have been my fault i should have loaded fail safe defaults then F10. Anyhow, i have a dead mobo, looking to help from peeps, contacted bigtoe, to see if he can offer some help.
Gluck peeps
mong
yea I want the 326 bios also pls, I wanna run my mem @313Mhz 2.5-3-3-2
got it ...
sry for bad webspace ... but theplanet is down