Geforce 6200, World Class orb#1 3DMark 2001: 21108

Printable View

Show 100 post(s) from this thread on one page

04-05-2005, 02:03 AM
over@locker886

I heard, Eagle 6600 256MB Agp have hynix 3,3ns!!! memory.
3,3ns better overclocker than 3,6ns Hynix in practise??

My card: Eagle 6600 128MB Agp @ 520/666 with 3,6ns samsung.
04-05-2005, 02:48 AM
Brandybuck

Please wait I'm come in :D
04-08-2005, 01:03 PM
zakelwe

http://service.futuremark.com/compare?2k1=8521162

650/710 @1.65v gpu and 130fps in nature ......

Still not topped out on gpu . Not bad for an AGP card.

Regards

Andy
04-08-2005, 09:21 PM
zakelwe

http://service.futuremark.com/compare?3dm05=752085

685Mhz for gpu at 1.72v, now very bandwidth limited. Will need to work out the memory volt mod .

Regards

Andy
04-08-2005, 11:37 PM
Ebola

As you should suppose we would be happy you release the voltmod you did

May be as a tip, i can get up to 743MHz Ã:banana: 3DM01 on memory when applying them 2.7V without heatsink. I think we are still far from what this card can reach
04-09-2005, 07:14 AM
zakelwe

Quote:

Originally Posted by Ebola

As you should suppose we would be happy you release the voltmod you did

May be as a tip, i can get up to 743MHz Ã:banana: 3DM01 on memory when applying them 2.7V without heatsink. I think we are still far from what this card can reach

See previous page for my volt mod.

yes, I am fairly bandwidth restricted now so will try and figure out the volt mod for the Sparkle memory.

Regards

Andy
04-11-2005, 05:05 AM
peter lu

Quote:

Originally Posted by Ebola

Thx man for the flashing details :slap:

What i asked if you read carrefully is : did you try with same frequency with a 6200 bios ? (instead of 6600) in order to see what the 6600 bring

asus 6200 with 6200 bios
my cpu is very bad :(

http://service.futuremark.com/compare?2k3=3884573

http://img3.picsplace.to/img3/1612/aaa.jpg

http://service.futuremark.com/compare?3dm05=760683

http://img3.picsplace.to/img3/1612/bbb.jpg
04-11-2005, 08:45 PM
zakelwe

Nice scoring Peter. Does that have volt mod on memory or not ?

Regards
Andy
04-12-2005, 05:27 AM
peter lu

Quote:

Originally Posted by zakelwe

Nice scoring Peter. Does that have volt mod on memory or not ?

Regards
Andy

i haven't mod on memory or core.

asus 6200's mem is 3.6ns(hynix)
04-26-2005, 02:48 PM
Ebola

WR 3DM01 : 21891
04-26-2005, 08:34 PM
Brandybuck

I'll test my 6200 with 3400mhz FX55... :D please wait... :banana:
04-26-2005, 09:04 PM
zakelwe

Nice score Ebola. I think Brandybuck might be closing in soon though ...

What is your core and ram for those video cards guys? Or are you not giving anything away ?? :)

Regards

Andy
04-26-2005, 10:11 PM
Brandybuck

Ebola what's your card clocks... :) nice score congts. again :woot:
04-26-2005, 11:13 PM
Ebola

Thanx men, my video card is equiped with NV43 and 3.6ns TSOP Samsung

For this bench i set the chill to 5Â°C (cause i still use water as cooling liquid, on way for stg else) and ran the NV43 at 615MHz Vcore default (tÂ° stuck at 36Â°C, real far lower), Vmem set to 743MHz with 2.7V no heatsink, fan blowing on. SPAW set to 2922MHz, memory at 270MHz 2-2-2 with 3.4V

I even didn't try to put my BH-5 as the UTT sounds good enough at >260MHz
04-27-2005, 03:00 AM
zakelwe

Quote:

Originally Posted by Ebola

Thanx men, my video card is equiped with NV43 and 3.6ns TSOP Samsung

For this bench i set the chill to 5Â°C (cause i still use water as cooling liquid, on way for stg else) and ran the NV43 at 615MHz Vcore default (tÂ° stuck at 36Â°C, real far lower), Vmem set to 743MHz with 2.7V no heatsink, fan blowing on. SPAW set to 2922MHz, memory at 270MHz 2-2-2 with 3.4V

I even didn't try to put my BH-5 as the UTT sounds good enough at >260MHz

I have seen this issue, my temp got stuck at 36C for my 6600 also even though nearer to 10-20C I would guess( cooling is -20C glycol/methanol). I tried the 66.81 drivers and bingo .. went lower than 36C ... :clap:

then it got stuck at 29C !!!! LOL :D

My new 6600 runs at 700/755 with volt mods, still testing it. Some freezing and other problems so might have to downclock it.

Good luck with your competition guys, have fun.

Regards

Andy
04-27-2005, 03:16 AM
Brandybuck

Quote:

Originally Posted by zakelwe

My new 6600 runs at 700/755 with volt mods, still testing it. Some freezing and other problems so might have to downclock it.

very nice clocks :woot: :toast:
04-27-2005, 03:30 AM
zakelwe

Quote:

Originally Posted by Brandybuck

very nice clocks :woot: :toast:

Thanks, the first one did 685/714, not bad these Sparkle cards :) Need about 1.7v for gpu though and good cooling.

Regards

Andy
04-28-2005, 01:57 AM
overcrash86

WR :banana:
http://wowgame.free.fr/3000+%20939/3...6200%202k5.jpg
http://wowgame.free.fr/3000+%20939/3...206200bios.jpg

http://service.futuremark.com/compare?3dm05=806240

just testing ,but not max ,no arctefacts :D

i'll test this WE 3DMark 2k3 and 2k1 ,but with 6600 ID the scores are better :

6600 ID :

http://wowgame.free.fr/3000+%20939/3...00@634-699.jpg
http://wowgame.free.fr/3000+%20939/3...%20634-699.jpg 3DMark 2k3 8558

OCM powered :D
04-28-2005, 02:03 AM
Brandybuck

634mhz gpu clock... :toast: very nice , what's your gpu cooling :D
04-28-2005, 02:09 AM
overcrash86

Quote:

Originally Posted by Brandybuck

634mhz gpu clock... :toast: very nice , what's your gpu cooling :D

thanks

just moded barton 2500+ cooling :D
but my 6200 was vmoded ,1.65 vgpu ,it isn't the max 634 i think 650 probably more ,i'll try next week end ;)
04-28-2005, 05:08 AM
peter lu

my asus 6200 edit 6600 ID . no mod. air cool (ddr=henix 3.6ns)
and my cpu is bad :(

http://img3.picsplace.to/img3/1842/AXX.jpg
http://img3.picsplace.to/img3/1842/AWW.JPG

http://img3.picsplace.to/img3/1842/QQQ.JPG

http://img3.picsplace.to/img3/1842/ARR.JPG
04-28-2005, 08:25 AM
JDizzle

Wow, no mods at all? How did you get your memory to clock so high w/o any mods? I've only played with my Asus 6200 for about 45 minutes but the most I could get was 530/720 and 6800 in 3DMark03. 551/1197 is an amazing clock speed, how did you do it?
04-28-2005, 09:10 AM
cmanisali2001

Quote:

Originally Posted by peter lu

my asus 6200 edit 6600 ID . no mod. air cool (ddr=henix 3.6ns)
and my cpu is bad :(

Wow. Cong :clap:
Fantastic score :toast:
04-28-2005, 09:22 AM
peter lu

WR. ASUS 6200. no edit 6600 ID . no mod. air cool (ddr=henix 3.6ns)
CORE/MEM=600/772
http://img3.picsplace.to/img3/1843/AWW.jpg

http://img3.picsplace.to/img3/1843/APK.JPG
04-28-2005, 09:32 AM
peter lu

Quote:

Originally Posted by JDizzle

Wow, no mods at all? How did you get your memory to clock so high w/o any mods? I've only played with my Asus 6200 for about 45 minutes but the most I could get was 530/720 and 6800 in 3DMark03. 551/1197 is an amazing clock speed, how did you do it?

MEM=DDR 3.6NS(HENIX)
CORE/MEM=600/779. not 551/1197

Show 100 post(s) from this thread on one page