Quote:
Originally Posted by charlie
you guys are making me feel like an old man :(
Hey Poki isn't that a pic of Bogart's wife Lauren Bacall???
Printable View
Quote:
Originally Posted by charlie
you guys are making me feel like an old man :(
Hey Poki isn't that a pic of Bogart's wife Lauren Bacall???
I've just flashed to BIOS 1003-006: first impressions:
I set the CPU voltage to 1.600v on my Winchester and rebooted. This reported 1.58-1.59v in the BIOS Hardware Monitor! Setting it to 1.65 had no effect - stayed at 1.58v.
The full-screen BIOS logo now looks prettier :D
Others have reported fans running quieter on GeForce 6800GTs at bootup - haven't checked this myself yet.
I juist saw it can only be updated with the new ASUS Update tool (wich can't be downloaded yet)
Don't worry - download the older one (or install the one on the CD that came with the board) and it will update itself to the new version when you run it.
This is the best Bios by far for me. Still have problems running my RAM (TCCD) 1t, but other than that, this BIOS is great.Quote:
Originally Posted by Cyrus The Virus
version 1.6 bios do anything for getting tccd to run at over 240fsb?
No, not for me at least. I have ended up running my rig at 312x9 with devider at 266. This gives me 2.8GHz on CPU, and 400 on memory. Can run it at cl.2 -2 -2 -10 1t there. But hopefully a new bios will fix it so I can run devider at 333 so the memory will operate at 510 with cl.2.5 -3 -3 -10 1t like it did on my K8N Neo2.
cas 2.5 still unstable, even at stock 400. So I'm stuck with dividers as well.
Will try with som BH-5 tomorrow. But without Booster, so I don't know how far they will go. 3v isn't enogh I'm afraid. But I'm planning on running 330FSB with 200 devider. That will let the memory run at 430MHz If I can get it stable there with cl.2 -2 -2 -5 I'll be happy.
the 1003-007 bios is out...
From what i have seen is that you do not try that bios
There is also a leaked 1003 final here
Cyrus the virus can tell you more
Thanks,
flashing to 1003 final now...
(from 1003-7) <== seems to work ok
DON'T use 007 it has big problems. 1003 works fine and memory speed and timings are getting better
running 1003 but my board refuses to do 1T @ 200 bus...
I'm begining to think it's the memcontroller on the cpu
What exactly does the 1003 final change? I just flashed to it and I do not notice a difference from 1003.008?
1004.001 beta
I hope this will fix 1T issue... Somebodey try it :) couse i have a non deluxe...
ftp://ftp.asuscom.de/pub/ASUSCOM/BIO...e/1004sd01.zip
DLing it now. Can't possibly be any worse than running with 1003. :(
dling now too, hopefully these are better than previous revisions...Quote:
Originally Posted by iron3k
1004-001 Doesn't help much I think some small changes but no big ones like solving 1T issue
I wish they'd get the 1T thing worked out. At least they are still working on it.
I haven't had any problems running my ram @ 1T (even at high speeds)Quote:
Originally Posted by madgamer
What is "high speeds"? Give me the numbers :slobber:Quote:
Originally Posted by QuikSilver
~260FSB on the ram and I cannot go any higher even at 2T...Quote:
Originally Posted by iron3k