Everest memory tests

While I was messing around with this TCCD stuff I checked the latency at each stage here is what I found:-

All tests run at 2.5-3-3-7

240 - 48.6
250 - 46.6
260 - 44.9
270 - 43.2
280 - 41.6

To see the difference the timings made I checked it at
216 2-2-2-5 = 50.4
216 2.5-3-3-7 = 53.9

Dunno if its useful, but it was interesting to see the difference.

I think as you get higher mhz the timings will make a proportionally bigger difference to latency.

so at 216 the difference is 3.5, but at 280 the difference would be more with tighter timings.

To do well in the latency test you need tight timings and high mhz... very high mhz may also work... can anybody get over 300mhz on there ram with a64?

cpu mhz helps a ton, too.

best so far

3846 mb/s
1511 mb/s
37.3

http://img17.exs.cx/img17/9665/everest1.jpg

Quote:

---

Originally Posted by Holst

I think as you get higher mhz the timings will make a proportionally bigger difference to latency.

so at 216 the difference is 3.5, but at 280 the difference would be more with tighter timings.

To do well in the latency test you need tight timings and high mhz... very high mhz may also work... can anybody get over 300mhz on there ram with a64?

---

Look at mine, mem was at 316.5MHz.
CPU speed 9x316.5 ;)

BH5- low latency and high voltage memory :D
(aircooled system, Vdimm- 3,8V, MSI Neo2, winxpsp2.)
I'm sure, that below 30ns is possible :p:
http://www.hot.ee/winchester/latency...0-BH5-32.8.PNG

I'm getting 6486/2889/46.2ns at 245x11 1:1 with a 3500+, 512x2 3700EB(3-3-2-8) and an A8V.

Quote:

---

Originally Posted by Jaan

BH5- low latency and high voltage memory :D
(aircooled system, Vdimm- 3,8V, MSI Neo2, winxpsp2.)
I'm sure, that below 30ns is possible :p:
http://www.hot.ee/winchester/latency...0-BH5-32.8.PNG

---

Jaan,
That latency is sweet! How's your memory controller able to keep up? They are actually desighn to work at 50, 60 and 70ns.

Congrats! I think that should be the world record.

Here are my DDR400 and DDR 434 2-2-210 results from GSkill memory. My BH-5 just arrive and I'll be playing with it soon.

I could not upload my result pics. What's going on with my account? Do I need some sort of permission to do that? Who should I contact? Could it be my own fault? I use manage attchment --> upload ---> post rely. What else am I missing?

resize and compress them as well as use an accepted file format?