stable? :rolleyes:Quote:
Originally Posted by HaLDoL
Printable View
stable? :rolleyes:Quote:
Originally Posted by HaLDoL
Mine 3200+ does 10x250 @ 1,4 :D 3dMark, Superpi, cpumark and moviestabile, will test nfsu2 now. Did som screens at 2,6ghz with 1,475volts, I assume that I can lowe the volts, never tested superpi or something at that speed...
My Neo2 was @ 333HT Haven't tested more HTT at the momet becasue I am looking for an nice 24/7.
Edit:
I use an Stock cooler and my stepping is:
ADA3200DIK4BI
CBBFD 0433SPMW
1057936H40374
Got the same cpu :D But will try it tomorrow and see what it wants to do :D
Hello there, suppose this is as good a place to start as any!
I've only been trying for 1:1 clocks atm as the divider is too much of a killer on performance. This one primed for about 4hrs or so and never went over 52C load. Stock cooler and volts. I'm going to have to reformat over the weekend after corrupting windows with my fsb madness :eek:
The ram will do 2.5-4-4-10 280fsb at 2.7V then I killed everything heading towards the magical 300fsb and thrashed my OS :(
This is the first stable oc I achieved - primed for about 4hrs...
The rig is as follows:
Antec Trueblue 480W
Winchester 3500+ retail boxed
PQI Turbo 3200 2-2-2-5 1GB kit (platinum)
MSI K8N neo2 platinum
Gainward GS 2400 at 400/1100
Audigy 2 ZS
2x Seagate Barracuda hdd's 80GB 7200rpm 2MB/8MB cache.
MSI 52x/32x/52x CDRW
Plextor P116A rev 2.0 DVD Rom + other junk :p
http://members.boards.ie/tacticalanni/result1.jpg
3500er Winchester 0441
2550mhz boxed cooler 1.4v :D
i love that chip
mobo is k8n neo2
I love my 0433SPMW that makes 2.8ghz with box cooler :D
i havent tested beyond 2550mhz :) ill do this as soon as i get my watercooler. dont trust my 40 c as shwon in bios, although the cooler is really cold to the touch
that doesnt mean that the proc is cool ;)Quote:
Originally Posted by Huhn
very good, with better timings, you can crack 28sec;)Quote:
Originally Posted by Razor_cut
http://people.freenet.de/funkflix/3ghz.JPG
Watercooled! :)
:toast:
My 3500+ 0441 TPAW won't go over 2750 with the Alphacool NexXxoS block and 2 BI Xtreme rads... damn :(
I had the same week and stepping - wouldn't do 2.4 Ghz stable regardless of voltage. There is no consistency with these CPUs and overclocking.Quote:
Originally Posted by Kriller
But they run hella cooler than the clawhammers - or even newcastles - half the heat dissipation at the same speed.Quote:
Originally Posted by HaLDoL
you guys that use the stock coolers, just out of curiousity do you use the stock goop on the cooler or do you clean that off and use something like artic silver or whatever
i think its a waste of money if i would use arctic silver for that crappy boxed cooler. so just use that goop and ur fine.Quote:
Originally Posted by Sephir0th
Are you shore? I haven't seen any 0433SPMW that doesn't clock goodQuote:
Originally Posted by dnottis
Yup, positive. I've got a 3500+ now at 2.5 GHz using 278 FSB with the memory 1:1, primes for 12+ hours. I could get the 3200+ to 2.5 GHz and above but it wouldn't prime stable past ~2.350 GHz. I can run this 3500+ chip up to 2.6 GHz but it wont prime stable either for very long. Using OCZ 520W PSU, a 2 week old MSI Neo 2 Platinum - & Corsair XMS4400C25PT 1024 kit.Quote:
Originally Posted by Kriller
Sometimes I question what people here consider stable though. I could superPI 32m at 2.5 GHz with the 3200+ but prime would crap out within 10 mins. My idea of stable is prime for at least 12 hours because nothing else seems to test stability quite as much as prime does.
Hmm, have no time to prime, but I havnät have any errors in windwos and games so...Quote:
Originally Posted by dnottis