New OCZ PC-4200 Platinum @ 550CL 2 , 600 and 630

Printable View

Show 100 post(s) from this thread on one page

11-04-2004, 01:27 PM
jagare

I'm running my I875 setup with TCCD right now.. 270mhz 2.5-4-3-5 is the best I can do stable, if these new modules can do 275mhz with 2-3-3-x timings, I would dump these modules and get those in an instant!
11-04-2004, 01:32 PM
Gogeta

Quote:

Originally Posted by SteveOCZ

Guys they are special hand picked TCCD which come from the very top of our speed bins. These are the new rev that like voltage so you guys should all do very well with them....put our scores to shame like only the folks at XS can :D

I'm sold :D
11-04-2004, 01:44 PM
ryanpgroovy

The Non TCCD stuff is still in development Cycle , I will let you know when it gets close to release time
11-04-2004, 01:56 PM
starblazer

How high do these go with 2 sticks?
11-04-2004, 02:05 PM
neologan

this looks like great stuff, perhaps its time to upgrade my 3200eb, actually it was time 5 months ago :stick: I haven't been around here for a while and this other ram thats not out yet sounds really exciting too!

ps, kanavit is a strange strange guy.........probably advices bush on policy making and stuff. :toast:
11-04-2004, 02:37 PM
P4rthen0n

Thz SteveOCZ :toast:

Quote:

Originally Posted by Rancidelephant

It clearly is a big deal ... these guys are usually very forthcoming with information like this when then can be and say nothing when they cant ... i assume its the latter, buy some and take the heatspreadders off u panzie :D

It would be a big deal if they had said something like "we cannot say the chips used". I believe no one would ask that anymore. :)

Quote:

Originally Posted by neologan

ps, kanavit is a strange strange guy.........probably advices bush on policy making and stuff. :toast:

I don't know who Kanavit is, but i know who Bush is (unfortunately).
11-04-2004, 02:48 PM
trans am

Quote:

I don't know who Kanavit is, but i know who Bush is (unfortunately).

I can only imagine Bush trying to overclock.

(Bush)
"I'm just gonna run this frontside busses up so I can get them internets to go quicker."

"But first I gotta lower the Hypertransportational Links down to 3x..."
11-04-2004, 02:51 PM
Ubermann

You dont think its:

-Computer crashed, it must be a terrorist action!

Sorry for off topic btw.
11-04-2004, 03:21 PM
trans am

Quote:

Originally Posted by Ubermann

You dont think its:

-Computer crashed, it must be a terrorist action!

ROFLMAO!!!
11-04-2004, 03:44 PM
althes

you guys are so wrong
11-04-2004, 03:59 PM
Rabbi_NZ

Quote:

Originally Posted by SteveOCZ

Guys they are special hand picked TCCD which come from the very top of our speed bins. These are the new rev that like voltage so you guys should all do very well with them....put our scores to shame like only the folks at XS can :D

Thanks for that Steve, appreciated.
Looks like this is THE memory to get at the moment :banana:
11-04-2004, 05:04 PM
jagare

So the OCZ PC-4200 Platinum that does 275Mhz 2-3-3-x on I875 is coming out in a few days?
11-04-2004, 05:28 PM
bacon

any ideas on Uk pricing?
11-04-2004, 06:21 PM
conrad.maranan

Quote:

Originally Posted by BAcon

any ideas on Uk pricing?

Any ideas on US pricing? At any rate, I'm going to wait to see how other A64 users do with this RAM. If I'm impressed, I'll consider implementing these in the 939 rig I plan on building in January.
11-04-2004, 11:28 PM
V I P E R

Quote:

Originally Posted by ryanpgroovy

These are all at low mult , no tweaks on - I barely get any time in the lab and I have to do these after work , so I spend all my time going for pure speed

I am really just trying to max out these new units units knowing that increased voltage can help

Best we got on the 875 in dual channel was 275 2-3-3 with the voltage jacked up on a beat up old Asus P4C800.

I saw that, but can you give us more bench results? I like to see Sandra MEM Bench and Everest Write and Read at least.

Can you tell us what are doing the new sticks with 2,9v?
11-05-2004, 08:26 AM
SteveOCZ

No idea on price but my guess is a bit more than the 3700 platinum ;)
11-05-2004, 09:09 AM
TEDY

uf that means around 350$ for 2*512...
11-05-2004, 10:19 AM
=[PULSAR]=

Wow thats expensive...lol, suppose I should start saving now.
11-05-2004, 10:38 AM
eva2000

Quote:

Originally Posted by =[PULSAR]=

Wow thats expensive...lol, suppose I should start saving now.

lol you think that's is expensive try buying OCZ ram in Australia thanks to our GST 10% tax and disty markups etc etc lol

2x 512MB OCZ PC3200 Plat rev2 DC kit = AUD$560 or US$425
2x 512MB OCZ PC3700EB DC kit = AUD$626 or US$475
11-05-2004, 11:50 AM
P4rthen0n

Quote:

Originally Posted by eva2000

lol you think that's is expensive try buying OCZ ram in Australia thanks to our GST 10% tax and disty markups etc etc lol

2x 512MB OCZ PC3200 Plat rev2 DC kit = AUD$560 or US$425
2x 512MB OCZ PC3700EB DC kit = AUD$626 or US$475

Now imagine that in Portugal, but keep in mind that the salaries are way lower.

Lucky you. ;)
11-05-2004, 12:04 PM
starblazer

So how well will these do with 2 sticks on the DFI UT 250GB?
11-05-2004, 12:51 PM
georgesod

Quote:

Originally Posted by SteveOCZ

Guys they are special hand picked TCCD which come from the very top of our speed bins. These are the new rev that like voltage so you guys should all do very well with them....put our scores to shame like only the folks at XS can :D

Cl=2 doesn't make any difference especially comparing it with 2.5. And the tests with 875 were with pat off. Can u do some tests with more voltage>3.2 pat on and 2,2,2,5?
11-05-2004, 12:53 PM
Mag Master 21

Quote:

Originally Posted by starblazer

So how well will these do with 2 sticks on the DFI UT 250GB?

The exact question that I want to know..

Instead of Sandra, can we see some superpi and 3d runs please?
11-05-2004, 01:19 PM
SteveOCZ

Quote:

Originally Posted by georgesod

Cl=2 doesn't make any difference especially comparing it with 2.5. And the tests with 875 were with pat off. Can u do some tests with more voltage>3.2 pat on and 2,2,2,5?

Yup I know cas does next to nothing.

Right now the OCZ main office is changing buildings so I doubt you will see any more posts from Ryan or Eric until Monday since all the gear is just being unpacked.

I would assume that on the A64 they will clock like the pc3200 plat and pc3700 plat did but slightly better. There are lots of posts from Tony and others with those same setups so do a search to tide you over till some new benches can be done
11-05-2004, 01:59 PM
Zeus

Wow, this TCCD is really making some money!

We take a truckload of TCCD chips, test them and if we find them to be average we put them on the Platinum rev2 3200EL.

If they are pretty good we'll put them onto the pc3700.

If they like high voltage we put them on these new wonder sticks!

I'm starting to get why my rev2 isn't doing DDR600..... :(

Show 100 post(s) from this thread on one page