Is it possible that it could limit the board or CPU at FSB220, because there is no way I can get my 3.2GHz NW and a P4C800-E Deluxe further. And if so, how do I disable PAT?
Printable View
Is it possible that it could limit the board or CPU at FSB220, because there is no way I can get my 3.2GHz NW and a P4C800-E Deluxe further. And if so, how do I disable PAT?
Would it be able to implement an FSB adjustment? Great tool ;)
3.52 ghz isnt that bad, maybe its a cpu limit, but maybe try running in 5:4, if you can break 220 then you pat might be limiting you...or perhaps just your ram is limiting you.Quote:
Originally Posted by Alaza
Hmm... for DRAM latency parameter, I only have access to:
00
01
10
11
How come you guys can set 111, 101 etc.?
Cheers,
Suman
In some earlier version it used to be 3 digits, now it's just two.
guys i founded really fast for pi 2-2-2-5-70us-64us-00 the pat, disable of course over 200....
Malachia - I too adjusted my Refresh settings from 70 to 120 and from 7.8 to 64us. However, I experienced some very wierd OS errors, crashes, and screwed up User Profiles in my XP SP2 installation. I'm still diagnosing the cause, and these particular tweaks may not be to blame, but I thought you would want to know that these settings might carry some small risk. I really loved using 'em too, cuz they bumped my Memory performance quite a bit. In Everest, my Read went from 6300MB or so to almost 6600MB, CTIAW saw a boost of a/b 200MB, and SANDRA 2005 also saw around 200MB to both Read and Write. They also added to my PCMARK 04 score. I wish that there was more activity in this thread, and with this App, because I really would like to have the benefit of others experiences to a similar degree as with the A64 Tweaker.
damon69
with the settings above i have get the best performances without limiting oc, there are better settings that you can gain 0,2s but they limited my oc too much!!!
I agree, my OC has been highest with these settings. I read an article which discussed the nature of the refresh rate and the fact that our favorite settings would tend to relax the stress on the RAM, thus enabling higher FSB. In fact, all of the other Tweaks available with this Utility are apparently too much for my XMS3500C2 (BH-5), cuz I get an immediate BSOD or Freeze Up. I just wanted to point out that I have experienced some OS corruption issues since employing the tweaks, and give you a heads up. Be well, brother!
damon69
I can't make it work on my Asus P5GD1 PRO. Only the i855 works. The 865 gives an error on load.
I have two machines in here, and also would like to have much more choices on the P4 as I have on 3000+ with the A64_Tweaker.
Anyone ? :D
Quote:
Originally Posted by Stormgiant
i think your board use 915 or 925...
i915P actually.
guys is true that with PAT enabled you have not more agp/pci fixes??
has anyone tried this software on dfi 875-t ?
It's true that PAT doesn't work at high FSBs on 865PE chipsets, which are basically binned 875Ps as I understand it. I always run my RAM 1:1, and currently I've gotten my 3.0E stable at 253fsb (3.8G) but with PAT enabled I can't even boot at 233fsb (3.5G) and it usually does that on air and stock voltages. Anybody want to trade an IC7-G for an IS7 with heatsinks epoxied all over it? :rolleyes:
edit: Oh yeah, and there is nothing wrong with my PCI/AGP lock with PAT enabled. The chipset just can't handle the tight timings at high FSB.
-Luf
great tool!! helps allot with dell 400sc. Can take advantage of my hyper x tighter timings. Thanks
Could some one please walk me through how to force the 'DRAM latency parameter' to 101, using wpcredit and pmem or wpcreset so that the change is _permanent_. I have some compatibility issues with OCZ ram on my P4P800 D, and this solves it.
Can we use parameter to tell Performance Mode enabled when booting up (adding short cut to Startup folder)? How?
Links seem to be dead..... Just got my P5P800 setup and was looking for a tweaker....
Just tried this little app in my Win2k installation. Adjusting to 11 just causes the computer to reboot, either that or lockup, even at stock, SPD timings and with PAT off. Something is mucked up with this program.
Hey, this link is busted. Can someone possibly email/aim/msn it to me? Please? I wanna get PAT :D.
Quote:
Originally Posted by NickS
what mobo?
tweaker can only enable/disable pat if in bios is enabled....
Ohh. I didn't know you needed pat.
Quote:
Originally Posted by NickS
you can have it only on some 865 and all 875 boards...
Look @ my sig for my mobo :)