nForce2 Tweaker V0.2 - by CodeRed

Printable View

Show 100 post(s) from this thread on one page

07-27-2004, 04:11 PM
WildKard

Quote:

Originally posted by CodeRed
* cough *

File menu

Haha, im FN retarded :) thx
07-28-2004, 01:15 PM
SAE

Hi.

Wanna congratulate you two genius's for that great lil app. Gets better and better. :D

I was able to improve my 1m Superpi time, at least I could drop my FSB by 2MHz to get 31s :thumbsup:
07-29-2004, 10:49 AM
Dekal

First, i will always be where it has to do with TWEAKING . By the way, is it able to use MEMORY INTERLEAVING with any nForce Mainboard?? This picture shows the MEMORY DEVICE MAPPED ADRESS of my system. It seems to be without MEMORY INTERLEAVING! Who knows more?

http://dekal.kalytta.com/images/abit...CrystalDMI.jpg
07-29-2004, 01:34 PM
saaya

memory interleaving makes quite a bit of a difference, im not sure if its really disabled. maybe the app just reports it wrong?

interleaving gives around 50-100mb/s extra memory bandwidth. whats your bandwidth atm?
07-29-2004, 03:24 PM
Dekal

Quote:

Originally posted by saaya
memory interleaving makes quite a bit of a difference, im not sure if its really disabled. maybe the app just reports it wrong?

interleaving gives around 50-100mb/s extra memory bandwidth. whats your bandwidth atm?

This is my system:

http://dekal.kalytta.com/images/abit...0Benchmark.jpg

http://dekal.kalytta.com/images/abit%20an7/cpu.jpg

http://dekal.kalytta.com/images/abit%20an7/memory.jpg

:banana:
07-31-2004, 09:37 PM
Rabbi_NZ

EXCELLENT work Tictac and Codered :)

Thanks a lot... it's great to hav at least have some of the settings available that DFI users enjoy already!

Will there be a version with Slew-rate/Drive-strength available soon?
08-01-2004, 04:16 PM
bleeder

where can I find out what the different dram alpha parameters mean?

t(rc) and t(rfc) also I'm not familiar with,
and the pci/agp settings I dont really know much about, other than 32 to 64 or even 128 might increase the performance

sorry for the n00b tweaking questions, google doesnt help much
08-03-2004, 11:48 PM
bleeder

Nevertheless I've been playing for the past hour or so with the tweaker and got a nice improvement from sandra.

With 2-2-2-11-10-0 and 0/0/3/3/2/0/3 at 216fsb I get 3303/3068 in sandra. Is that about right or good for 216fsb? Single channel with my 1x512 mushkin bh5.
08-13-2004, 06:19 PM
NoOne

no more news tictac ?
09-15-2004, 09:21 PM
Jaan

Tictac and Codered- your Tweaker is what I need- thank You :toast:
I have a questins too:
Can you add a CL (CAS) taimings change options in tweaker?

And I need new DFI Lanpary/Infinity BIOS- I want some new taimings options in BIOS:
CL1,5 and 1, Trcd/Trp/Tras - zero (0) options :D
Why?- I can run my memory @CL1,5-1-1-0-1@DDR266, or CL2-2-0-2@DDR400+
And also, Trfc/Trc- 9 is not minimal working taimings, but the fastest.
Thank You.
09-16-2004, 03:06 AM
CodeRed

Quote:

Originally Posted by Jaan

Tictac and Codered- your Tweaker is what I need- thank You :toast:
I have a questins too:
Can you add a CL (CAS) taimings change options in tweaker?

And I need new DFI Lanpary/Infinity BIOS- I want some new taimings options in BIOS:
CL1,5 and 1, Trcd/Trp/Tras - zero (0) options :D
Why?- I can run my memory @CL1,5-1-1-0-1@DDR266, or CL2-2-0-2@DDR400+
And also, Trfc/Trc- 9 is not minimal working taimings, but the fastest.
Thank You.

Unfortunately the CAS Latency values cannot be changed within the current driver frame work as several registers need to be changed simultaneously :(
09-16-2004, 10:27 PM
Rabbi_NZ

Quote:

Originally Posted by CodeRed

Unfortunately the CAS Latency values cannot be changed within the current driver frame work as several registers need to be changed simultaneously :(

CodeRed,
is this the same reason Drive-Strength and Slew-Rate can't be added?
09-17-2004, 01:40 AM
CodeRed

Quote:

Originally Posted by Rabbi_NZ

CodeRed,
is this the same reason Drive-Strength and Slew-Rate can't be added?

Yes and No :D

It isnt in NF2 Tweaker coz ive been a bit lazy lately and dont have a NF2 rig to test on.
It should work for these settings though .. although I wouldnt recommend changing these values at max overclocks
09-17-2004, 02:57 AM
SAE

Quote:

Originally Posted by CodeRed

.. although I wouldnt recommend changing these values at max overclocks

Hehe. You'll very likely burn something out changing it realtime ;)
(it hardlocks for sure)

I did not see any stability gains from altering these settings... BUT on the contrary... !
09-17-2004, 05:42 AM
Rabbi_NZ

CodeRed & SAE,
thanks for the feedback... that was my big hope for the magic 250FSB 1GB CPCON mark... any suggestions?
I can run 3DMark up to about 247 2.5-2-2-11 CPCON but thats about my limit... havent tried 2.5-3-3-11 with this BIOS but all previous ones have failed no matter what.. tips from the masters would be OH SO APPRECIATED! :cool:
09-30-2004, 03:45 PM
SwimmerBoy

Did your project ended?!?!

[[]]
09-30-2004, 04:34 PM
SAE

Quote:

Originally Posted by Rabbi_NZ

CodeRed & SAE,
thanks for the feedback... that was my big hope for the magic 250FSB 1GB CPCON mark... any suggestions?
I can run 3DMark up to about 247 2.5-2-2-11 CPCON but thats about my limit... havent tried 2.5-3-3-11 with this BIOS but all previous ones have failed no matter what.. tips from the masters would be OH SO APPRECIATED! :cool:

Hmm. You did not give any system data... :confused:
10-13-2004, 02:39 PM
Grus

Can it be used with my Abit AN7? Im in a bit of doubt that the uGuru may prevent it from working.. uGuru doesn't like 3. part programs to communicate with the mobo :/
10-13-2004, 02:45 PM
Rabbi_NZ

Quote:

Originally Posted by SAE

Hmm. You did not give any system data... :confused:

it's in my sig ;)
the site was a bit strange for a few weeks during upgrades so maybe my sig wasn't shown... :confused:
10-14-2004, 02:43 AM
SAE

Quote:

Originally Posted by Rabbi_NZ

it's in my sig ;)
the site was a bit strange for a few weeks during upgrades so maybe my sig wasn't shown... :confused:

Oh. Okay. Can see it :D

Hmm, IMO it's hard with 2x512mb sticks to do 250 cpc on, especially with that abit ;)

I think the board is limiting ya here. CPC strongly depends on the ram sticks too, of course. The higher you get, the luckier you were with these ram :P LOL

Most people do not even get that high, 220 is max for them.

I think your ram will definately rock on 64bit systems :thumbsup:
10-14-2004, 12:09 PM
Rabbi_NZ

Quote:

Originally Posted by SAE

Oh. Okay. Can see it :D

Hmm, IMO it's hard with 2x512mb sticks to do 250 cpc on, especially with that abit ;)

I think the board is limiting ya here. CPC strongly depends on the ram sticks too, of course. The higher you get, the luckier you were with these ram :P LOL

Most people do not even get that high, 220 is max for them.

I think your ram will definately rock on 64bit systems :thumbsup:

Thanks for your opinion dude :toast:
I wish I could go AMD64 right now... but it's been a very expensive few weeks lately, and my money tree crop still hasn't sprouted! hehehe
Actually this NF7 is really strange with 2x512mb.... with my 1GB XMS3500C2 I was 3DMark stable up to 242 2-2-2-11 CPC-ON aswell, but only when using the first release D10 BIOS... strange :confused:

I've given up on 250 stable now, jus want a 4k Sisoft Sandra Membench! 3995 is highest so far but that was promply followed by that beautiful blue screen :D Dammmmit!
10-14-2004, 01:13 PM
SAE

Quote:

Originally Posted by Rabbi_NZ

Thanks for your opinion dude :toast:
I wish I could go AMD64 right now... but it's been a very expensive few weeks lately, and my money tree crop still hasn't sprouted! hehehe
Actually this NF7 is really strange with 2x512mb.... with my 1GB XMS3500C2 I was 3DMark stable up to 242 2-2-2-11 CPC-ON aswell, but only when using the first release D10 BIOS... strange :confused:

I've given up on 250 stable now, jus want a 4k Sisoft Sandra Membench! 3995 is highest so far but that was promply followed by that beautiful blue screen :D Dammmmit!

:lol:

Yeah... try to tweak you timings to the max... try 9-2-2-2-2.0-7-12-e-e-f-e-0-0-3-3-1-0-3, hehe. :D

Great results anyways, even if you really cannot reach 250 stable :thumbsup:
10-14-2004, 01:34 PM
Rabbi_NZ

Quote:

Originally Posted by SAE

:lol:

Yeah... try to tweak you timings to the max... try 9-2-2-2-2.0-7-12-e-e-f-e-0-0-3-3-1-0-3, hehe. :D

Great results anyways, even if you really cannot reach 250 stable :thumbsup:

Will try that tonight :toast:
Would you mind writing down the names of each Alpha timing and the value to set it to please?
It's jus that I'm not sure if the values in the DFI BIOS are in the same order as in the nForce2 Tweaker :confused:

Thanks for the help SAE :cool:
10-14-2004, 02:57 PM
SAE

Quote:

Originally Posted by Rabbi_NZ

Will try that tonight :toast:
Would you mind writing down the names of each Alpha timing and the value to set it to please?
It's jus that I'm not sure if the values in the DFI BIOS are in the same order as in the nForce2 Tweaker :confused:

Thanks for the help SAE :cool:

IMO the timings are (this way in the tweaker):
auto
7
12
9
2
2
2

other column:
0
0
3
3
1
0
3

:D Dunno the names from my rememberings... ;) (the order is like what I told ya above)
10-14-2004, 03:41 PM
blinky

i ran a quick test to see how much those timings would help my 3dmark scores

tests ran at a lazy 2.4ghz, 375/315 card clocks

i got a 31 point imporvement:

from this:
http://img.photobucket.com/albums/v3.../nf2tweak1.jpg

to this:
http://img.photobucket.com/albums/v3.../nf2tweak2.jpg

:toast:

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 08:10 AM.

XtremeSystems