No info on the cooling?
Printable View
No info on the cooling?
I'm useing my Cascade Cooler.Quote:
Originally posted by =w=
No info on the cooling?
OPP
Hopefully this board has full mobile support :)
I was gunna pick up a mobile chip:) but for testing I figured better use a desktop.Quote:
Originally posted by LilGator
Hopefully this board has full mobile support :)
OPP
I cant wait for this board!!!
lets us know when you get a 939 DFI opp :p:
Useing a .5 mutilpier you can get your BH-5 3D stable at 280MHz.
OPP
isn't the 0.5 multiplier a but in mhz reporting
ie the divider rounds off to the higher number so it seems higher when in fact it's a bit lower ????
Yes, from that screen, it looks like about 264
Actually the .5 ran about 12 MHz higher stable then the whole numbers.
So with a whole number multi the Mushkin did 268MHz.
OPP
OPP where can I get some info on this board? Went to the DFI website and couldn't find anything.
Not sure, they should be out in a couple weeks after it is approved. And from my testing, this baby is ready to hit the streets:DQuote:
Originally posted by chunkylover77
OPP where can I get some info on this board? Went to the DFI website and couldn't find anything.
I'll be posting a thread on this mobo soon. Not much more info then I've already posted in this thread though.
OPP
Looking forward to it.
daym opp, that board looks sick!
do yourself a favor and get a 3700+, they clock like gems :D
Or better yet, do us ALL a favor, and get a mobile, so we know if it'll work. :D
Can you give us a little price quote on how much it'll cost Opp? :) (if you know that is)
Might have to dump this Epox as soon as that comes out.
Is the board you have the equivalent of a Lanparty or an Infinity ? All the expensive extras/colors, or a cheap, simple solid board ? :D
Out of curiousity I went poking around for it and found a past Anandtech article detailing the DFI LANParty NF-250 board (at a show) -- so maybe this is it? ;)
http://anandtech.com/showdoc.html?i=1942&p=3
Dam a nice lanparty S754 sounds way to good!
Is this it OPP ? ;)
http://images.anandtech.com/reviews/...s/2004/dfi.jpg
"DFI will also feature nForce3 250 with its midrange Inifity series motherboards."
Yay ! :toast:
Why do i feel my heart ache at such a thing? :)
It's just a motherboard..but,oh,what a motherboard it is...:D
lolQuote:
Originally posted by thebeast
Why do i feel my heart ache at such a thing? :)
It's just a motherboard..but,oh,what a motherboard it is...:D
Very nice Stock voltage options, for comparison my MSI goes 1.85v cpu, No NB volt options, and 2.8 to the memory.Quote:
Originally posted by OPPAINTER
Yea the DFI is completely un modded, just the booster.
The v-core option will give up to 2.08V in the bios. Up to 1.9V for NB, and gives you up tp 3.16 V for mem without the booster.
I'm testing my BH-5 right now. It ran 3D yeterday at 260 without a hick up. Gunna really test it now:D
OPP
The board is stable to 315fsb it gets flakey past that and wont boot @ 320.
Seems like the board to have when released.
opp: you say the board will be good with the ocz ram booster.... i take it that means the dfi vdimm is nothing special (like the reported 3.2v etc)?
He said it gives up to 3.16v without the booster (must be 3.2v in BIOS)