Printable View
I don't hope so... it would fry the card... it would be the same as to CONNECT these 2 pins :DQuote:
Originally posted by XanderF
Yet, stock (unmodded), I measured .73 kOhm resistance between these two points! Shouldn't the FB pin to ground pin be 0.0 resistance?
Anyway... what VR should I get for the VGPU mod? 10K? 5K?
I'm about to tear off the HS and watercool this sucka so if I can vmod it at the same time it would just be as easy, eh? ;)
Damn I cant wait to vmod this sucker :P
Hey Macci how much do you think that this card can score in 3dmark01 ?
I'm not Macci but why don't you try the Futuremark Project Search & Compare option ;)
By the way guys, if I choose to voltmod the GPU, will there be another chip like a voltregulator or something that will get hotter too?
I can put a small heatsink on about any chip so IF that's necessary please tell me which one it is... :stick:
I tried Vmodding mine yesterday and it died....first I added a molex connecter from an old broken psu to check the vgpu...booted up and it worked fine reported 1.23 while in 2d mode and 1.43 in 3d mode....I turned of my pc and added the vr to the pin on the isl chip and grounded it on the black wire from the molex connector on the card, the exact same grounding point as the vgpu monitor and I plugged the card back in...making sure that all connections was OK, turned on the pc....the card was making some weird noises and the fan wasnt running and my multimeter was going nuts! and I double checked that my VR was at 0ohm.....just died! well its rma time, luckily I did the mod really clean...so Ill try again as soon as I get a new card...btw would you mind posting some pics of your cards modded ? , so that I have the possibility to check what I did wrong
You tried to voltmod your card with a VR set to 0 ohm? OMG!!! :eek: :eek:Quote:
Originally posted by Bra!nFreeZe^
I tried Vmodding mine yesterday and it died....first I added a molex connecter from an old broken psu to check the vgpu...booted up and it worked fine reported 1.23 while in 2d mode and 1.43 in 3d mode....I turned of my pc and added the vr to the pin on the isl chip and grounded it on the black wire from the molex connector on the card, the exact same grounding point as the vgpu monitor and I plugged the card back in...making sure that all connections was OK, turned on the pc....the card was making some weird noises and the fan wasnt running and my multimeter was going nuts! and I double checked that my VR was at 0ohm.....just died! well its rma time, luckily I did the mod really clean...so Ill try again as soon as I get a new card...btw would you mind posting some pics of your cards modded ? , so that I have the possibility to check what I did wrong
If that's what you did it's no surprise it died, you need to set the VR to its maximum and SLOWLY reduce the resistance, thus upping the voltage... NEVER start at 0 ohm!!
Damn I misunderstood! :( some vmods you have to raise the resistance so the vreg thinks that it doesnt supply enough voltage!! well Ill remember that the next time :P
Well I voltmodded it too... 3.68Kohm and a nice 1.63v in 3D mode... :)
Hmmm a pretty big increase in core speed if you ask me...
478 before the mod, and 542 after!! :eek: :eek:
Well it's always from MAX to MIN and never the other way around.... like that you gave your GPU like... u-u-uhm.....around 3V....Quote:
Originally posted by Bra!nFreeZe^
Damn I misunderstood! :( some vmods you have to raise the resistance so the vreg thinks that it doesnt supply enough voltage!! well Ill remember that the next time :P
No wonder it died then :) well Im getting a new one next week and if Im lucky...it comes along with a shuttle SN45G :)
A 5k VR set to 4.03 gave me a 0.1V increase. I could reach easily 600Mhz on the core in 3D. Didn't test it higher, breaking the 600Mhz barrier is enough for now. :)
Well I don't think, that you'll reach 600MHz GPU with a 5900XT.... that's kindda on the unbelievable side.... :rolleyes:
Not without supercooling...
Yeah I know it's unbelievable, but it's true. And with plain aircooling.
http://kaine.studentenweb.org/PoV/PoV9.jpg
Here's a 3dmark run @ 600/900
http://service.futuremark.com/compare?2k3=2218827 (edit: link not valid anymore)
I could reach 543 without vmod. So it's a good core, maybe a fx5950 ultra one
Are you getting linear improvement when going from stock clocks to those 600/900 clocks (test after every 10MHz jump on GPU and make sure the score goes up)? it seems to me your card might be "throttling" there.
Your card at 600/900 = GT4 of 41.8FPS
Mine at 526/803 = GT4 of 44FPS
And that is a very GPU dependant test.
I did have the D3D settings set to 'high performance' but still it shouldn't make such a huge difference..
so you're saying that I might get a better score if I downclock it a bit?
I raised the voltage with 0.2V and the best I could do is 606Mhz on the core. I got 7246 3dmarks but still only 43.9 on GT4
cool guys, but can't you up your voltage in the mobo's BIOS ?
i am prob. wrong
I guess thats about right for the system you are running :)Quote:
the best I could do is 606Mhz on the core. I got 7246 3dmarks but still only 43.9 on GT4
Nice clock and score.
I got my Albatron mem from 803MHz (minor artifacts) to 911MHz (100% clean, will bench at 936 easily) by removing the small ramsinks and flashing Leadtek 5900XT BIOS in. ;)
Now I need to try if the vmod and improved ram cooling will help...
Hmmm... if the card in your photo is actually yours Macci, the blue one, then I have the same one as you, only sold by another vendor called Club3D...
I got the XFX 5900XT bios in it now, since the memory will go higher then, 820mhz artifactfree, 840 rains artifacts :D and I'm curious if the Leadtek XT bios works for me...
Some bioses appear to work, but if your computer has been powered down and you power up again, just when you would reach the windows desktop the screen would stay black...
The XFX bios didn't have that problem, maybe I should try the Leadtek... so Macci could you please mail that bios to me?
Also... do you think a mem vmod would make difference?
I've heard rumours of the mem crapping out on peeps and/or not helping much anyway
Mine's vmodded with the 5K set to 3.68 and gives me 1.63v in 3dmode :)
542 core that's what it will do with app. 6900 3dmark03 points :)
That is becouse the Point of view 5900xt has loose timings on the mem that is also the reason that the mem clock high :)Quote:
Originally posted by macci
Are you getting linear improvement when going from stock clocks to those 600/900 clocks (test after every 10MHz jump on GPU and make sure the score goes up)? it seems to me your card might be "throttling" there.
Your card at 600/900 = GT4 of 41.8FPS
Mine at 526/803 = GT4 of 44FPS
And that is a very GPU dependant test.
I did have the D3D settings set to 'high performance' but still it shouldn't make such a huge difference..
I have my Point of View 5900XT@520mhz core ant 1ghz mem whitout vmods :toast:
By the way sorry for my poor englisch
No problem Beastie :D
Now go vmod that card and don't come back before you hit 600 core ;)
According to some, that is impossible ...Quote:
Originally posted by Garrett
No problem Beastie :D
Now go vmod that card and don't come back before you hit 600 core ;)
Catch my drift? ;)
Yes HaLDoL... rofl... ik snap het hoor :P (that was Dutch, for the non-Dutch here :D)
Looks like I'm going to have to up the voltage a bit more to beat you...
But still we don't have 20k :(
You need a A64 setup:cool:Quote:
Originally posted by HaLDoL
According to some, that is impossible ...
Catch my drift? ;)
By the way my PoV5900XT is sunday also voltmodded :toast:
oops that was for garrett
dutch: hehe, ik was gewoon een beetje verbaasd dat sommigen me niet geloofden. Maar m'n 3dm03 score bewijst genoeg denk ik.Quote:
Originally posted by Garrett
Yes HaLDoL... rofl... ik snap het hoor :P (that was Dutch, for the non-Dutch here :D)
Looks like I'm going to have to up the voltage a bit more to beat you...
But still we don't have 20k :(
I'll beat 20k easily, once I have some proper cooling on my cpu. Did the benches with only a 120mm papst fan on the cpu. I also did all 3dm01 tests in one run without any tweaking between them. And I should certainly gain some points when I change the LOD.
Also the memory on the gpu has no heatsinks on them. Don't know if that will help. I won't try the vmem mod as it has almost no effect according to Macci.
Still the heatspreader on the core has to go :) I'll try to reach 620+ on the core and a 7500+ score on 3dm03.
Shame it's getting warmer around here :D
can ANYONE send me that Leadtek 5900XT bios PLZ???
-edit- I already have it... if someone needs it, mail me :)