Printable View
Replaced an old Q6600 I had with 1700 + tomahawk
Running WCG 24/7 @ 3.7ghz vcore 1.16 cpu temp 65C on AMD stock cooler ... been running about 36 hrs with no issues.
I did some brief OC and bench @ 3.9ghz .. I didnt bother to test stability because i know i need a better cooler. :)
Attachment 132224
Attachment 132225
Okay, I know I haven't been posting anything great, but wanted to do some testing that I'll benefit from. Tried max OC on stock voltage and that was 3.6ghz. I have been running the past few days at 3.8ghz 1.25v. Gaming, rendering IE.. etc.
Ran CPU-Z stress test for a couple hours to get max temp and load (watts). All testing was done on the h100i.
http://3800z24.info/Ryzen/3.8ghz_1.25v_Idle_Load.jpg
http://3800z24.info/Ryzen/3.8_1.25v_RyzenH100i.JPG
a screenshot with Blender 2.78a - 100 on Ryzen R7 1700@4,05GHz air cooled - Asus B350 Plus - DDR2400 CL15, I will add later a photo, avec la mise en place:
voila la mise en place, btw I have installed the latest BIOS on Asus Prime B350 Plus and the issus with the RAM remains, it doesn't boot over DDR2400.
Well, FINALLY MSI gave me a BIOS that allows AMP profiles and run 3200mhz with just a click of a setting in BIOS. Really shaping up to be a nice board. Plus the boot time is great!
http://3800z24.info/Ryzen/stock_AMP_3200_G-Skill.JPG
Nice now how is it with bclk?
Haven't tried yet. Been crazy busy as of late. Will let you know.
HiQuote:
Originally Posted by chew*
CPU BCLK only goes to 103, since beta bios 1.32, I has hoping for more on 1.33. Now, there is no more beta bios to try, MSI "kindly" removed it all.
103 is the max right now, though Memory and POST delay have been the priority in the changes, well and stability of course. One thing I did like that was added was the "Memory Try It"Quote:
Originally Posted by chew*
http://3800z24.info/Ryzen/MemoryTryIT.jpg
Been real busy with some server projects lately so haven't had time to do much testing. Decided to run MemTest Pro on the AMP profile with the FlareX 3200 kit. Just in case anyone wondered if it is working.
Hope to have time to try lower timings as well. I must say, this BIOS boot fast and has been stable. I look forward to more updates from MSI.
http://3800z24.info/Ryzen/MemtestPro...0_CL14_AMP.jpg
i should be getting the tomahawk with a 1600 and 2x4gb of some patriot 3000c15 stuff monday :) the board still get your stamp of approval?
Yes, this board has been fantastic. Been stable now for a while running 3.8ghz at stock V's. Using three different MEM kits from G-Skill and no issues. Running Flare-X 16GB kit at 3200mhz, 14CAS, A-XMP profile 2. Games, rendering whatever I throw at it.
with the last AGESA beta BIOS 1.62 Tomahawk works flawlessly with XMP profile 2 DDR2933 with 16GB Corsair CMK kit DDR3000, and it works also a little over XMP with DDR3066 CR 2T- which is an included option in the BIOS, up to DDR4000.
lets see that Titanium in action Charged :D
I'll give the "Chew* tested, Mother Approved" board a try this weekend!
I think it was Chew* abused ( on air) wifey approved lol.
Well, I miss typed anyways, so haha...
So far 4hgz with Cinebench and about an hour of 7 days 2 die gaming, lol. On Air
Okay, was playing around a little bit tonight and had some weird Pi 1M test.
So what is going on with the last loop on my setup, see the comparison from Carrizo below
Carrizo
http://3800z24.info/Carrizo/Carrizo_118_Pi_1M.JPG
Ryzen
http://3800z24.info/Ryzen/Pi_werid1.JPG
Not sure how you managed that with PI. It should've been around 10.4-10.5. I never saw anything like that happen with my 1200.
Did you set affinity at all? It's possible something kicked on right when it was about to finish.
Yah thats weird. Is that 7 or w10?
Oldguy932,
I ran several runs, all the same, even with affinity.
Chew*
all runs were under Win 10.