Hyper Pi 6 thread 32m @ DDR3-2206 9-10-9-24 1T @1.669 VDIMM and 1.40 CPU/NB:
http://img97.imageshack.us/img97/9029/hyperpi2206.jpg
Hyper Pi 6 thread 32m @ DDR3-2206 9-10-9-24 1T @1.669 VDIMM and 1.40 CPU/NB:
http://img97.imageshack.us/img97/9029/hyperpi2206.jpg
Think there's anymore in it mem frequency wise for 32m?Quote:
Originally Posted by Raja@ASUS
I'm not sure what it will do wide open. Just switched over to water-cooling for that run, so will see how things fare. Six threads is promising though, I'm starting to enjoy AMD again after a long time away :)Quote:
Originally Posted by chew*
AMD has always been fun :DQuote:
Originally Posted by Raja@ASUS
Making progress now that I swapped in a fresh cpu not abused multiple times at high volts under ln2......still 0128 bios.
http://chew.ln2cooling.com/Ch5/1100.jpg
Prime 95 DDR3-2206 9-10-9-24 1T @ 1.669VDIMM @ CPU/NB 1.40V:
http://img215.imageshack.us/img215/9...me2200pass.jpg
Hyper Pi 6 thread = DDR3-2222 9-10-9-24 1T @ 1.669VDIMM @ CPU/NB 1.40V:
http://img21.imageshack.us/img21/298...rpi32m2222.jpg
Hyper Pi 6 thread - DDR3-2206 9-10-9-24 1T @ 1.669VDIMM @ CPU/NB 1.40V.
3035MHz NB & HT:
http://img685.imageshack.us/img685/2811/32m22003knb.jpg
wow, Chew 2100 MHz 7-9-7! Flares kit?
Thought I'd try DDR3-2200 with a decent MC speed:
http://img30.imageshack.us/img30/803...bprimeand3.jpg
it will be problem 4330 MHz for Hyperpi 32M for aircooled Thuban? :) Its only a bit better average chip...
On ROG board I found usefull guide for overclocking AMD processors with detailed description of BIOS elements. I think, its good to show here, because If somebody will be tuning his rig it could help a bit. In deed good work here: http://bit.ly/lCRiE1
little update.
2080 MHz 8-9-8-24-37-1T, 1.675V at DRAM
http://img815.imageshack.us/img815/5...athuban073.png
http://img198.imageshack.us/img198/4...athuban074.png
2087 MHz 8-9-8-24-37-1T, 1.675V at DRAM
http://img694.imageshack.us/img694/8...athuban075.png
http://img577.imageshack.us/img577/8...athuban076.png
And finally, for fun I tried max stable OC, but this spring-summer days are in CZ too hot. I had 27 C in room, CPU cores topped at 66 C.
http://img844.imageshack.us/img844/2...athuban077.png
I want this board!!!
but i beware crosshair 5 extreme will release too?
Crosshair V Formula
1035T @3910MHz
16GB memory @ 1600MHz 7-8-7
ASUS GTX570 x 3
Prime95 running - Showing amount of memory used
click for larger image
http://www.edgeofstability.com/image.../prime_r_s.jpg
Prime95 stopped - Showing time run and number of tests
click for larger image
http://www.edgeofstability.com/image.../prime_s_s.jpg
click for larger image
http://www.edgeofstability.com/image...jpg/3d06_s.jpg
click for larger image
http://www.edgeofstability.com/image...pg/3dvan_s.jpg
click for larger image
http://www.edgeofstability.com/image...jpg/3d11_s.jpg
click for larger image
http://www.edgeofstability.com/image...pg/pcvan_s.jpg
3ds Max w/V-ray
Time to render: 1:42:42
click for larger image
http://www.edgeofstability.com/image..._1_42_42_s.jpg
nice Praz, this little (slowest) x6 is good here. Its hard to find it in CZ. where I can download V-ray? Thx.
I don't think V-Ray is available as a trial.Quote:
Originally Posted by FlanK3r
Praz can you do me a favor and load the above settings again and just pull up cpu tweaker screen?Quote:
Originally Posted by Praz
I need it to verify something with MRL.
Sure but may not be till the weekend that I can get the CPU and memory back in the board.Quote:
Originally Posted by chew*
Crosshair V Formula
1035T @4060MHz
4GB memory @ 1730MHz 6-7-6
ASUS GTX570 x 3
Prime95 running - Showing amount of memory used
click for larger image
http://www.edgeofstability.com/image.../prime_r_s.jpg
Prime95 stopped - Showing time run and number of tests
click for larger image
http://www.edgeofstability.com/image.../prime_s_s.jpg
click for larger image
http://www.edgeofstability.com/image...jpg/3d06_s.jpg
click for larger image
http://www.edgeofstability.com/image...pg/3dvan_s.jpg
click for larger image
http://www.edgeofstability.com/image...jpg/3d11_s.jpg
click for larger image
http://www.edgeofstability.com/image...pg/pcvan_s.jpg
3ds Max w/V-ray
Time to render: 1:38:45
click for larger image
http://www.edgeofstability.com/image..._1_38_45_s.jpg
Crosshair V Formula
1090T @4080MHz
8GB memory @ 1800MHz, 8-9-8
ASUS GTX570 x 3
OCZ 240GB Vertex3
Post 1 of 2
The combination of CPU, memory and NB speeds with the set memory timings is about the limit for this CPU. When pushing the CPU to the edge don't underestimate the importance of the more obscure settings in the UEFI. The highlighted drive strengths, if left on auto, results in Prime failing in less then 5 minutes.
click for larger image
http://www.edgeofstability.com/image...22195631_s.jpg http://www.edgeofstability.com/image...22195638_s.jpg
click for larger image
http://www.edgeofstability.com/image...22195650_s.jpg http://www.edgeofstability.com/image...22195656_s.jpg
click for larger image
http://www.edgeofstability.com/image...22195737_s.jpg http://www.edgeofstability.com/image...22195741_s.jpg
click for larger image
http://www.edgeofstability.com/image...22195805_s.jpg http://www.edgeofstability.com/image...22195751_s.jpg
Crosshair V Formula
1090T @4080MHz
8GB memory @ 1800MHz, 8-9-8
ASUS GTX570 x 3
OCZ 240GB Vertex3
Post 2 of 2
Prime95 running - Showing amount of memory used
click for larger image
http://www.edgeofstability.com/image.../prime_r_s.jpg
Prime95 stopped - Showing time run and number of tests
click for larger image
http://www.edgeofstability.com/image.../prime_s_s.jpg
click for larger image
http://www.edgeofstability.com/image...in7/3d06_s.jpg
click for larger image
http://www.edgeofstability.com/image...n7/3dvan_s.jpg
click for larger image
http://www.edgeofstability.com/image...in7/3d11_s.jpg
click for larger image
http://www.edgeofstability.com/image...n7/pcvan_s.jpg
3ds Max w/V-ray
Time to render: 1:38:32
click for larger image
http://www.edgeofstability.com/image..._1_38_32_s.jpg
Thanks John, this is ace :)