"V2" Koolance *Dual D-5* Bay Reservoir! (RP-452X2)

Quote:

---

Originally Posted by k0rnh0li0

so only the PMP-400's are able to run this dual bay res or does anyone know a listing of what pumps can be used?

---

Pretty much any DDC will work with this. A lot of models have mounting feet on the base you'll have to remove before you can install them.

The only DDC's I know of without the feet are the Swiftech MCP-35X and the Koolance PMP-400.

You'll just need to saw and sand the feet off, not a big deal if you have the tools.

Edit: That's for the DDC model above. For the D5 model, any D5 pump should work.

Quote:

---

Originally Posted by BlueAqua

Pretty much any DDC will work with this. A lot of models have mounting feet on the base you'll have to remove before you can install them.

The only DDC's I know of without the feet are the Swiftech MCP-35X and the Koolance PMP-400.

You'll just need to saw and sand the feet off, not a big deal if you have the tools.

Edit: That's for the DDC model above. For the D5 model, any D5 pump should work.

---

I'm pretty sure all of the newer 355s also come like this :up:

Quote:

---

Originally Posted by spotswood

Can this product be mounted face up?

---

I don't think there's any reason you couldn't. It might take a little longer to bleed, but both inlets/outlets within the reservoir would be at the bottom beneath the coolant, and the pumps would still be in their original horizontal orientation.

Tim

Hmm, face up? Interesting idea (trying to imagine how this restop would look on top or side of case)

Our serial connector is now available for this product. There's a bonus acrylic piece included for the lower reservoir that will improve flow performance further. These are likely to run out of stock shortly, but we'll have more by next Monday.

http://www.koolance.com/water-coolin...rp452x2_p0.jpg

http://www.koolance.com/water-coolin...rp452x2_p1.jpg

Tim

That is way better than the 12" of tubing connector I used for serial testing. :up:

And interesting, how that acrylic piece works by enhancing flow even more

Any way of getting the serial connector in Australia without paying $30-50 shipping for it?

Thanks

Quote:

---

Originally Posted by SkItZo

Any way of getting the serial connector in Australia without paying $30-50 shipping for it?

Thanks

---

Our resellers in Australia should have inventory in about 1-2 weeks. Other resellers in the US who currently offer USPS shipping should have inventory next week. Our first shipment was pretty small, so I don't think we'll have much stock out there until at least Mar. 18-25th.

Tim

Thanks Tim :up:

no issues still this thing is solid love it

Can't wait till this becomes available at a US Retailer, Question.

I am considering buying a (PMP-450S) to run in serial with my existing Swiftech MCP655-B. I am toying with the idea of having the 450S as the pump pushing water OUT of the res while the 655B sucks water into the res.

With reference to the picture Tim posted with the serial loop adapter, the 450S would be P2 and the 655B will be P1.

Question... will mixing the pumps be an issue?

I suppose I'll need to buy a Koolance (CTR-SPD24) 24V Pump Controller to maximize the output of the 450S?

:clap:

Ill have to check one of these out when they are out in the US.

loving it!

God damnit Tim! I hate the lack of UK stock! Do want!!! XD

We have stock here in Australia, thing is though that its cheaper to buy from the US...

Just got my 2 x 452x res today!! Damn what a nice piece of kit!

I order a bunch of koolance connectors and 2 x serial links today, cant wait!

Koolance - you guys rock! :clap::clap::clap:

Quote:

---

Originally Posted by Paradoxxx

Question... will mixing the pumps be an issue?

---

As long as the pumps have a similar output, they should be fine. You might have to throttle one or the other until they sync enough to bleed the lines.

Tim

My current res started leaking last night. all the more reason for me to get one of these bad boys!:D

problem was everyone is sold out!


but I finialy found some. for those who are also waiting on stock you can find it here
Link

Seller states he is an authorized Koolance dealer.

I ordered one from him and so far the response has been near instant.

Quote:

---

Originally Posted by Koolance

As long as the pumps have a similar output, they should be fine. You might have to throttle one or the other until they sync enough to bleed the lines.

Tim

---

Thanks for the feedback, it seems my best option is to buy another pump that matching my existing pump.

got pics of how the acrylic part mount inside? j/c got a pic?

dont need the connector piece but might buy just for the arcrylic

got pics of how the acrylic part mount inside? j/c got a pic?

dont need the connector piece but might buy just for the arcrylic

Quote:

---

Originally Posted by Koolance

Our serial connector is now available for this product. There's a bonus acrylic piece included for the lower reservoir that will improve flow performance further. These are likely to run out of stock shortly, but we'll have more by next Monday.

http://www.koolance.com/water-coolin...rp452x2_p0.jpg

http://www.koolance.com/water-coolin...rp452x2_p1.jpg

Tim

---

Will this work with the V1?

Quote:

---

Originally Posted by Adamantine

Will this work with the V1?

---

Do you mean RP-450X2? There is not a way to connect that for series. The front reservoir is shared and liquid would recirculate into the front tank if the rear nozzle ports were connected.

Tim

I couldn't wait for a US Retailer to stock the serial connector, I ordered it from Koolance and a second pump (from SW).

Considering my "return" trickles, I'm hoping to see some improvement with my temps.