wow nice :up:
Printable View
wow nice :up:
havent yet :D I hate 3d benching :ROTF: dont have a decent 480 1175 if im lucky :shrug:Quote:
Originally Posted by [DRACO]
my is 3018...Im looking forward, how good will it :)
Here is what my 3018B179 want on 1.3V Vantage, my cpu dont seem to have problems with high NB/ram
Testing ln2 hopfully next week.
http://peecee.dk/uploads/102010/xs.org.jpg
Cant push vtt over 1.4v on ln2 :( causes no boot on r3e. on air is nice though 2088 7-7-7-19-60 4.2ghz uncore for 32m
Im alsoo planing to run it on asus re III, and ln2 next week, i will report if i have the same problems.
What happens when you raise vtt from windows?Quote:
Originally Posted by Splave
here is what I have to do. -90c boot profile with 1.7vcore 1.275vtt reboot, raise vtt to 1.325v reboot, up vtt with oc station in windows to 1.396v. Then when I bsod or lock up and try to restart it will hang at cpu led and I must clear cmos and reload the 1.275vtt profile restart set 1.325 restart and its really annoying and ln2 wasting. I cant cold boot over 1.275vtt it just hang at cpu led. Small price to pay though for a pretty nice chip :D
Going to test on x-power today
have u tried different bios?Quote:
Originally Posted by Splave
its maybe an option.
it worked with my ud3r+980x combo
f5 latest official bios - no boot above 1.395v bios set
f6i beta bios - boot up to 1.495v bios set
Some chips i have tested will not tolerate VTT above 1.4v, I have also had chips that will do up to 1.6 Vtt seems to be more of a CPU attribute than a motherboard issue.
on your GT chips have you seen any change on the CB when trying single, dual, or triple channel?
on my last chip it would have no cb - cbb if i was using dual channel but thats due to crappy IMC cold bugging havnt tested enough on this new one.Quote:
Originally Posted by V2-V3
some more results, sorry its mostly just messing around :ROTF:
I hope my 06 cpu test didnt degrade my chip :rofl:
Superpi 1m is okay, than just wanted to see how well pf would run at same settings. Proper runs to come :D
I like the PF and 1M runs :)
1.4v 5ghz ?
rofl
:) yep!
hello,Quote:
Originally Posted by Splave
cb? cbb?
.
nice but haven't you tried lower multi like x33 to have higher ram clocks in 2:10 ?
CB is -156c CBB -120c :DQuote:
Originally Posted by [DRACO]
More to come tonight subaru :) will update
okay.Quote:
Originally Posted by Splave
waiting for your results
try x23 uncore multi, today it seemed far better to me than x22 / 3710mhz crash vs 3915mhz spi 1m with same 1.33v vtt /
:eek::Djust Awesome Splave !! your batch is amazing and what is max speed on air ? can u reach 5G with decent low voltage ? and what is max nb and uncore? :) Thanks... i just tested 1.78v on VTT :ROTF::D it still alive but not gain in bclk either and that is badQuote:
Originally Posted by Splave
ehh 1.78v vtt is a LOTQuote:
Originally Posted by PytonOrm
Excelent Chip Splave! congratulations! :)
Thanks nacho, fyi I use 1005 and 704 bios only :)
Its getting stronger every time I bench it :) CB in dual channel is -170c. Some more results...sorry pi and pfast ineffecient, wanted to see max mhz on the cpu then will go back and raise uncore and mem frequency :D
aq3 shot is with gtx-285 at 756/1512 :ROTF: cheers!
SPlave, what BIOS looking better? Thx
hard to say 1005 hard restarts sometimes when I only change the bclk or multi, 704 never seems to do that but CBB is -130c so its not a big deal for me.
I had issues with 2:12 on the 1005 but i seem to be the problem and not the bios! ;)