3x2GB Super Talent 2200C8 @DDR3-2392Mhz 8-8-8-24 1.7v

Printable View

Show 100 post(s) from this thread on one page

06-03-2010, 05:33 PM
radaja

i know how you feel,these will be my first hypers and im excited as hell.
06-03-2010, 05:44 PM
systemviper

So is this the Super talent 2000 Cl7 that everyone is talking aobut.

Super Talent Project X Series DDR3-2000 2GB CL7 Memory - WX200UB2G7
06-03-2010, 05:48 PM
BeepBeep2

Sorta. Thats the single stick.

Here is the Triple Channel kit:
https://www.ewiz.com/detail.php?name...nel-Memory-Kit

There is no dual channel kit.

I'm still trying to get rid of my 2200 C8's.
06-03-2010, 06:10 PM
systemviper

al least they are cheaper then the CMGTX2
06-04-2010, 03:22 PM
Shiranui Gen-An

3x2GB Super Talent 2000 C7

I had something nice waiting on me at home today :D

http://img691.imageshack.us/img691/1...x6g7pfront.jpg

http://img692.imageshack.us/img692/5...ux6g7front.jpg
For some reason, these don't have the "Speed" label like eva2000's :confused:

http://img39.imageshack.us/img39/430...0ux6g7back.jpg

http://img64.imageshack.us/img64/321...ux6g7label.jpg

http://img25.imageshack.us/img25/931...0ux6g7pcb1.jpg
The PCB has similar markings as eva's, STT-702.

http://img15.imageshack.us/img15/988...0ux6g7pcb2.jpg
Once again, these use 8-layer Brainpower PCBs.

http://img218.imageshack.us/img218/6...0ux6g7mghe.jpg
And finally, as the Coolaler review of the pre-release product showed, these use J1108BASE MGH-E Hyper sticks.
06-04-2010, 03:27 PM
BeepBeep2

I'm waiting for your results...so I can pull the trigger on my set.
06-04-2010, 03:27 PM
Hondacity

projectx - speed - supertalent 3rd revision?
06-04-2010, 03:31 PM
BeepBeep2

Quote:

Originally Posted by Hondacity

projectx - speed - supertalent 3rd revision?

I just think they are confused. :ROTF:
06-04-2010, 03:32 PM
Shiranui Gen-An

Quote:

Originally Posted by BeepBeep2

I'm waiting for your results...so I can pull the trigger on my set.

Looking for some tight timings? I'll see how high these can go on 6-6-6 and 7-7-7, I'm pretty much uncore limited at 4200MHz and I'm on air so I won't be able to do anything crazy like 2200+ 8-8-8.
06-04-2010, 03:33 PM
BeepBeep2

Quote:

Originally Posted by Shiranui Gen-An

Looking for some tight timings? I'll see how high these can go on 6-6-6 and 7-7-7, I'm pretty much uncore limited at 4200MHz and I'm on air so I won't be able to do anything crazy like 2200+ 8-8-8.

6-6-6-18 is what I'm looking for.
06-04-2010, 04:25 PM
Shiranui Gen-An

I did some very preliminary memtest86+ 4.00 tests. Of my three sticks, only one managed 1 full pass@DDR3-1800 6-6-6-20 with BIOS voltage set to 1.70v (=1.735v real) but did not pass looping of test #5.
06-04-2010, 04:38 PM
runnin17

Quote:

Originally Posted by Shiranui Gen-An

I did some very preliminary memtest86+ 4.00 tests. Of my three sticks, only one managed 1 full pass@DDR3-1800 6-6-6-20 with BIOS voltage set to 1.70v (=1.735v real) but did not pass looping of test #5.

That's not very encouraging. Sticks binned at 2000 CL7 should be able to hit CL6 at 1800. Weird. :shrug:
06-04-2010, 04:41 PM
Shiranui Gen-An

Quote:

Originally Posted by runnin17

That's not very encouraging. Sticks binned at 2000 CL7 should be able to hit CL6 at 1800. Weird. :shrug:

I'm sure they will@6-7-6.
06-04-2010, 04:47 PM
BeepBeep2

That certainly makes me want to keep my sticks actually...

That kit is way more expensive than the 2200 C8's and I don't know if I want to go there.

I want 1800 6-6-6-18 or 6-6-6-20 for benching.

Exactly how high do they go with 1.65v and 6-6-6? That would help me alot.
06-04-2010, 04:57 PM
Shiranui Gen-An

Quote:

Originally Posted by BeepBeep2

That certainly makes me want to keep my sticks actually...

That kit is way more expensive than the 2200 C8's and I don't know if I want to go there.

I want 1800 6-6-6-18 or 6-6-6-20 for benching.

Exactly how high do they go with 1.65v and 6-6-6? That would help me alot.

Well gonna be a bit different clocking 3x2GB sticks vs 2x2GB, and AMD vs Intel, so don't take too much out of my results. That said, these are probably better suited for high 7-7-7, 7-8-7 and 8-8-8 clocking.
06-04-2010, 05:09 PM
systemviper

Quote:

Originally Posted by BeepBeep2

That certainly makes me want to keep my sticks actually...

That kit is way more expensive than the 2200 C8's and I don't know if I want to go there.

.

whooooooooooo nelly :cheer2:

that was a quick sig change....
06-04-2010, 06:12 PM
BeepBeep2

Quote:

Originally Posted by Shiranui Gen-An

Well gonna be a bit different clocking 3x2GB sticks vs 2x2GB, and AMD vs Intel, so don't take too much out of my results. That said, these are probably better suited for high 7-7-7, 7-8-7 and 8-8-8 clocking.

My 2x2GB 2200's on AMD clocked 6-6-6 worse than eva2000's 3x2GB on intel...thats why I'm asking.
06-04-2010, 06:13 PM
radaja

got my kit today and it looks like the same black PCB and markings as the 2000 cl7's
i was going to take a heatspreader off but couldnt figure out how these one are done?
Shiranui Gen-An,how did you get them off?just pull the one side off?i know about
heating them and gently prying them but do they just slip apart at that groove where
they are together at?
06-04-2010, 06:16 PM
BeepBeep2

Quote:

Originally Posted by radaja

got my kit today and it looks like the same black PCB and markings as the 2000 cl7's
i was going to take a heatspreader off but couldnt figure out how these one are done?
Shiranui Gen-An,how did you get them off?just pull the one side off?i know about
heating them and gently prying them but do they just slip apart at that groove where
they are together at?

Nope. You gotta heat them and pry them. I killed one of my good Super Talent DDR2 sticks a few days ago...that stuff is TACKY! :rolleyes:
06-04-2010, 06:26 PM
Shiranui Gen-An

Quote:

Originally Posted by radaja

got my kit today and it looks like the same black PCB and markings as the 2000 cl7's
i was going to take a heatspreader off but couldnt figure out how these one are done?
Shiranui Gen-An,how did you get them off?just pull the one side off?i know about
heating them and gently prying them but do they just slip apart at that groove where
they are together at?

I just heated the stick up for a couple of minutes and it pried off pretty easily, not much force was required at all. I indeed started from the groove where they come together.
06-04-2010, 07:00 PM
radaja

yea thats what im asking.like i said i know to heat them and pry but i just never seen ones like this with that tongue and groove connection.thanks guys
06-04-2010, 07:30 PM
eva2000

Quote:

Originally Posted by BeepBeep2

The Corsair GTX2 do ~1880 6-6-6-18 with 1.70v on AMD...my ram isn't really what I expected, I would have liked at least 1800. :yepp:

with memory being binned very aggressively by Corsair on GTX2, doubt you'd get anywhere close on cheaper elpida by other brands

Quote:

Originally Posted by andressergio

Will buy one of theses 2x2 Stalent 2200 CL8 will test against my Gskills PI 2000 CL6 on the EP45T USB3P i want some hypers in ma hands :)

let us know how you do :)

Quote:

Originally Posted by radaja

i know how you feel,these will be my first hypers and im excited as hell.

congrats and welcome to the world of fast tight ass high clock ram :D Potentially you can push bclk higher on elpida hypers too :)

Quote:

Originally Posted by Shiranui Gen-An

I had something nice waiting on me at home today :D

And finally, as the Coolaler review of the pre-release product showed, these use J1108BASE MGH-E Hyper sticks.

sweet MGH-E Hypers :up:

Quote:

Originally Posted by Shiranui Gen-An

I did some very preliminary memtest86+ 4.00 tests. Of my three sticks, only one managed 1 full pass@DDR3-1800 6-6-6-20 with BIOS voltage set to 1.70v (=1.735v real) but did not pass looping of test #5.

pretty similar to my 2200C8 2x2GB kits if you look at my memtest results for kit #1, #2 and #3 http://i4memory.com/f83/super-talent...tml#post131086 only 1 2x2 kit #2 hit 1800mhz 6-6-6-20 at 1.7, other 2 kits of 2x2GB hit 1788mhz 6-6-6-20 at 1.7v

Now I mixed in 3x2GB 2200C8 max memtest86 is at 889mhz easy and 894mhz 6-6-6-20 at 1.7v with some tweaking of RTL A/B/C channels but I managed to do it at lower CPU VTT of 1.3875v.

Quote:

Originally Posted by runnin17

That's not very encouraging. Sticks binned at 2000 CL7 should be able to hit CL6 at 1800. Weird. :shrug:

not really sticks binned for one speed only guaranteed for that binned speed, anything else is really up to individual modules and system and cpu IMC it's paired with.

Quote:

Originally Posted by BeepBeep2

My 2x2GB 2200's on AMD clocked 6-6-6 worse than eva2000's 3x2GB on intel...thats why I'm asking.

pretty close 3x2GB 2200c8 for me memtest is 889-894mhz 6-6-6-20 at 1.7v

Quote:

Originally Posted by BeepBeep2

Nope. You gotta heat them and pry them. I killed one of my good Super Talent DDR2 sticks a few days ago...that stuff is TACKY! :rolleyes:

not worth the risk, just finding out max cas6, 7, and 8 clocks should be enough :D
06-04-2010, 07:59 PM
radaja

Quote:

Originally Posted by eva2000

congrats and welcome to the world of fast tight ass high clock ram :D Potentially you can push bclk higher on elpida hypers too :)

yep im excited,got a 980x on the way and i just read your mem multi/uncore multi and vtt guide and i like the thought of having more options
for the uncore,i think it will be much more fun to OC with gulftown than with bloomfield.more options is alway better:up;
06-04-2010, 08:19 PM
andressergio

Quote:

Originally Posted by eva2000

let us know how you do :)

Thanks eva i reached 2000 CL9 1T PL8 on the EP45T USB3P and 1600 CL8 PL7 but Gskills need that weirdo 6-9... / 7-10.. so i wanna see some flat timmings like 6-6-6-18

i know its an old socket but maybe you may want to see what im testing here:
http://www.xtremesystems.org/forums/...05132&page=259

i will report as soon as i get them

Cheers from South America :up:
Sergio
06-05-2010, 01:08 PM
Shiranui Gen-An

3x2GB Super Talent 2000 C7 @DDR3-1740 6-6-6-20 1.74v

DDR3-1740 6-6-6-20 1T 1.74v 1.475VTT 21x145BCLK

Once again, it seems like I need a lot more VDIMM that others for the same clocks. Up to this point I've only used Gigabyte X58A series boards (UD3R and UD7), I'm not sure if a different brand like Asus would make a difference or not.

SuperPi 32M:

http://img251.imageshack.us/img251/4...6superp.th.jpg

8x HyperPi 32M:

http://img80.imageshack.us/img80/400...6hyperp.th.jpg

Everest Bandwidth:

http://img132.imageshack.us/img132/3...6everes.th.jpg

Show 100 post(s) from this thread on one page