266 MHz NF2 Dual Channel Done !!! 4100MB / Sec !!!

Printable View

Show 100 post(s) from this thread on one page

12-18-2003, 02:51 AM
L0$t Pr0PhEt

Quote:

Originally posted by xDUCK
:toast: Very nice!

Although I do have to point out that I get 198xx when running 250x10 with GPU @ stock, so I don't know what kind of fubared settings you're running to get such a low score at 266x10. :confused:

But I definately want to get my hands on these new DFI boards! :eek: :slobber:

Edit: To be fair, I set the record at 266 1:1 2-2-2-11, so you didn't actually *beat* the record, you matched it. ;) But obviously I'm sure you could beat it if you try a little harder. :toast:

No, if you look at his second screen it says 268 1:1 2-2-2-11 :)
Very nice score OSKAR_WU :toast:
12-18-2003, 04:50 AM
Fewture

Quote:

Originally posted by xDUCK
:toast: Very nice!

Although I do have to point out that I get 198xx when running 250x10 with GPU @ stock, so I don't know what kind of fubared settings you're running to get such a low score at 266x10. :confused:

But I definately want to get my hands on these new DFI boards! :eek: :slobber:

Edit: To be fair, I set the record at 266 1:1 2-2-2-11, so you didn't actually *beat* the record, you matched it. ;) But obviously I'm sure you could beat it if you try a little harder. :toast:

Look again ;) :D He kicked your @** on Mhz AND bandwith ;)
12-18-2003, 08:33 AM
LoWRiDeR

Guys can someone post the L12 mod?
12-18-2003, 08:43 AM
clockedOut

Its a STICKY in the AMD section.

http://www.xtremesystems.org/forums/...threadid=15300
12-18-2003, 08:47 AM
LoWRiDeR

Thnx mate
12-18-2003, 09:12 AM
LORD

Quote:

Originally posted by texuspete2k2
Board has to be up to the task though. Some people exhibit fluctuations with high vcore and vdimm. The mosfets on the board are really small. However, the DFI NForce2 -AL is a budget board though and has more standard size power reg, so maybe these mosfets are better somehow. Still the low mffg max is questionable. Might end up with other problems.

I am hoping with some cooling to get a solid 2.0v and use an infinity for my everyday box. A vmod would be nice but I think there might be a reason they dont let you use 2.3 vcore.

I think you might be correct regarding the power regulation of the board..... ;)

Still it would be nice if one of these would actually allow high speeds with really high fsb at the same time.

I would definitely get one if that were the case.
12-18-2003, 10:07 AM
Electroid

Quote:

Originally posted by Geforce4ti4200
any idea what fsb the average nf7-s 2.0 does?

non-Modded: ~ 220 - 235
12-18-2003, 11:50 AM
xDUCK

Well, I still have done 271fsb 2-2-2-11 (but it's 4/3 and CPU Interface Disabled :(). So going by pure mhz, I'm still ahead. :p:
12-18-2003, 11:54 AM
saaya

what sandra version is that?

Quote:

Originally posted by xDUCK
Well, I still have done 271fsb 2-2-2-11 (but it's 4/3 and CPU Interface Disabled :(). So going by pure mhz, I'm still ahead. :p:

*coughbraggartcough* :D
12-18-2003, 01:00 PM
Fewture

Quote:

Originally posted by xDUCK
Well, I still have done 271fsb 2-2-2-11 (but it's 4/3 and CPU Interface Disabled :(). So going by pure mhz, I'm still ahead. :p:

In my book that doesn't count.. ik can make a wcpuid of 2650MHz but thats it, whats the use? We want numbers!!

Edit:

You alwas want to be the fastest.. Every where i see you posting: "you didn't brake my score" or "I have higher MHz". In case you didn't notice, XS is not that kind of forum and it's not the way users on this forum interchange information!! So cut it out man.. Cheers.
12-18-2003, 03:40 PM
Astennu

Damm after this i'm gonna look for A: DFI NF2 LANPARTY B tomorrow :P

Can't wait to get passed the 250 fsb :D :banana:
12-18-2003, 03:48 PM
Astennu

Quote:

Originally posted by STEvil
Lan Party B and Infinity are nearly identical.

Lan Party A isnt worth the time.

I can only get te Lanparty B so far. But I'm looking for the differece but all i see is a other coller :confused: Can somebody tell me more ?

The INFINITY

LANPARTY B
12-18-2003, 03:50 PM
xDUCK

Hey guys, just to clarify, I don't mean to brag. I didn't even make a thread about my 271. :p: In my first reply to this thread, the FIRST thing I said was ":toast:". And I conceded that even though we may be tied (which I turned out to be wrong about since he had done 268 1:1 2-2-2-11), he would obviously come out on top if he tried a little harder.

Sorry if I sounded like I'm bragging. No hard feelings? :(
12-18-2003, 04:25 PM
Fewture

Quote:

Originally posted by xDUCK
Hey guys, just to clarify, I don't mean to brag. I didn't even make a thread about my 271. :p: In my first reply to this thread, the FIRST thing I said was ":toast:". And I conceded that even though we may be tied (which I turned out to be wrong about since he had done 268 1:1 2-2-2-11), he would obviously come out on top if he tried a little harder.

Sorry if I sounded like I'm bragging. No hard feelings? :(

:toast:
12-18-2003, 08:15 PM
buff

xDuck, I am only stuck at 218 because of my max cpu speed. I can go higher, but I'll have to run a slower top speed. I never tried the L12 mod, I might do it. Right now I can run my mem single stick at 233 2-2-2-11 CI enabled at 2.99vdimm. Both sticks top out at 233. As soon as I go to DC DDR, I have to go to 225-227. I just got some new KHX3000 w/ BH-5, so i'll see what it can do:)
12-18-2003, 09:36 PM
cowpuppy

OSKAR_WU: WTG man :toast: and Dual chanel too.

Records were ment to be broken.
12-20-2003, 03:02 AM
yotomeczek

Quote:

Originally posted by xDUCK
Hey guys, just to clarify, I don't mean to brag. I didn't even make a thread about my 271. :p: In my first reply to this thread, the FIRST thing I said was ":toast:". And I conceded that even though we may be tied (which I turned out to be wrong about since he had done 268 1:1 2-2-2-11), he would obviously come out on top if he tried a little harder.

Sorry if I sounded like I'm bragging. No hard feelings? :(

xDUCK ... he did 10x266 in 3D ... try this on NF7 ... :/ this mobo has a problems with high multis ...
8x245 stable ... but 10x245 no ... (CPU Prime stabile 2,56GHz ...)
On Prommie my mems (CH-5) did 8x240, 11x230, 12x220 (CPU 2,78GHZ stable) ...
Why on Abit NF-7 2.0 memory max fsb isn't the same @ multi x8 .. x10 ... x11 ... x13 ??
12-20-2003, 05:54 AM
Astennu

Quote:

Originally posted by yotomeczek
xDUCK ... he did 10x266 in 3D ... try this on NF7 ... :/ this mobo has a problems with high multis ...
8x245 stable ... but 10x245 no ... (CPU Prime stabile 2,56GHz ...)
On Prommie my mems (CH-5) did 8x240, 11x230, 12x220 (CPU 2,78GHZ stable) ...
Why on Abit NF-7 2.0 memory max fsb isn't the same @ multi x8 .. x10 ... x11 ... x13 ??

i'm running 240 @ 11.5x But cpu = maxed out.
12-20-2003, 11:45 AM
Lastviking

1 Attachment(s)

I need your new beta bios i cant run higher with this bios...:/

2x512 Mb Winbond-bh5(1/1)
12-20-2003, 11:56 AM
Cutthroat

yoto that is jsut going to make xDUCK instantly
get the lan party II and hook up both his prommies
to it ;)
12-20-2003, 02:03 PM
xDUCK

Quote:

Originally posted by yotomeczek
xDUCK ... he did 10x266 in 3D ... try this on NF7 ... :/ this mobo has a problems with high multis ...
8x245 stable ... but 10x245 no ... (CPU Prime stabile 2,56GHz ...)
On Prommie my mems (CH-5) did 8x240, 11x230, 12x220 (CPU 2,78GHZ stable) ...
Why on Abit NF-7 2.0 memory max fsb isn't the same @ multi x8 .. x10 ... x11 ... x13 ??

I am very CPU limited and yet I can do 260x10. I could go higher with more vcore, but I have the high fsb/high vcore problem.
12-21-2003, 02:46 AM
yotomeczek

Quote:

Originally posted by xDUCK
I am very CPU limited and yet I can do 260x10. I could go higher with more vcore, but I have the high fsb/high vcore problem.

Is 10x260 CPU INterface Enabled ??
12-21-2003, 12:22 PM
xDUCK

Quote:

Originally posted by yotomeczek
Is 10x260 CPU INterface Enabled ??

Yes. 2-2-2-11.
12-21-2003, 01:57 PM
yotomeczek

Quote:

Originally posted by xDUCK
Yes. 2-2-2-11.

Dual chanell ??
12-21-2003, 02:15 PM
ctgilles

Yes... :stick:

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 04:38 AM.

XtremeSystems