I testing Intel Xeon ES 2.9 GHz + ASUS P7P55D EVO 1 hour (( but bclk low - 210 on air. What tensions used?
Printable View
I testing Intel Xeon ES 2.9 GHz + ASUS P7P55D EVO 1 hour (( but bclk low - 210 on air. What tensions used?
"I think Biostar has figured out how to run 300BCLK, they can now buy our board in retail stores"
Uh-oh! :eek:
Humm , 300 should be fine :cool:Quote:
Originally Posted by massman
nice BCLK :shocked:
Quote:
Originally Posted by Pt1t
:D:D:D Nice Bclk from warm up before start :up:
Great Bclk , BUT What about Max Frequency ??
Can you bring it ??
:rofl: 1,4vcore at 3331mhz :D bad cpu
@ elmor good bclk,
try max mhz?
impressive bclk :up: keep pushing it!!
Wow! Nice bclk :up:
No kidding, I was about to hang up the thermos. This mid range stuff looks like it might be fun. I really really hope so.Quote:
Originally Posted by [XC] gomeler
very impressive... but thats just ss stable and on ln2 with a low multi... so thats comparable to the 25x bclock suicide runs on 1366...
which means a 20mhz higher bclock... so its not such a big diference after all... since qpi is used between two parts of the cpu on lynnfield, it makes sense that we can get higher bclocks...
im curious if we will see a 20mhz bclock boost with stable air results as well, that would be sweet! :D
wed be at around 240-250 bclock stable on air then...
pretty nice blc:up:
a friend of me told he has seen 280 on his DFI P55 board. i'll ask for screens:cool:
anyone curious about whats BCLK stable for you?
this is a reference for you guys, :)
264MHz BCLK stable for Super PI 32m
http://pic.xfastest.com/hicookie/s1156/264.png
4753 Nb freq? :up:
Yes, 870, 860 uncore is 18x to BCLK:)Quote:
Originally Posted by hiwa
oh oh i didn't know thatQuote:
Originally Posted by hicookie
thanks for info my 860 is still untouched :rofl:
Amazing bclk!
put a i7 920 on this motherboard!! (yes .. yes ! with a hammer)
First boot to 225Block watercooled and bump to 245Mhz :D
http://www.pt1t.eu/public/P55/gigabyte/UD6/245.png
http://valid.canardpc.com/cache/screenshot/675090.png
http://valid.canardpc.com/show_oc.php?id=675090
http://www.pt1t.eu/public/P55/gigaby.../UD6_water.JPG
is it a big difference between air and water (max. BCLK)?
max. BCLK with my i5-750 is 228Mhz on air (with 229Mhz can i boot but freeze @ windows screen) :D
http://img2.abload.de/img/p1060735muez.jpg
i get tomorrow 2 i7-860, i hope they can do more ^^
I think no , here i used watercooled because fix are already placed for ln2 :DQuote:
Originally Posted by Chri$ch
IT depends also of cpu ... got 5 870 , there is 10Mhz bclock difference between best one and poor one, and a poor 750 (229 on air too and not tested yet under cold) !
Ok thanks, i hope they can do a little bit more :)
btw i like it blue :D
http://img4.abload.de/img/air4956.jpg
I switched waterblock by pot :D
http://www.pt1t.eu/public/P55/gigabyte/UD6/ud6_ln2.JPG
That gives more Bclock !
http://valid.canardpc.com/show_oc.php?id=675165
http://valid.canardpc.com/cache/screenshot/675165.png
I7 870 P55 GD80 @ BCLK=308 DDR3-2467 CL8Quote:
Originally Posted by massman
http://forum.coolaler.com/showthread.php?t=217873
http://img12.imageshack.us/img12/404/40gddr31600c81.jpg
the member from coolaler.com said thats a bug with aircooling:)Quote:
Originally Posted by stasio
if you looking msi , coolaler has pushed alot , but limit bclk around 24x