Good luck, that would be killer to see.Quote:
Originally Posted by dpa
Here we go! :up:Quote:
Originally Posted by AndreYang
Good luck, that would be killer to see.Quote:
Originally Posted by dpa
Here we go! :up:Quote:
Originally Posted by AndreYang
@AndreYang : INSANE....................:up::up::up:
okey..
COULD the classified 760 coldbug before the 759...?
I have NO chance in h ell of reaching even -130.. I ran at -145 before. exact same settings.
i have test just one Classified 759 , coldbug at -120°/-125° with 4 x i7 D0 (but the cpus were better at -90°/-100° :)Quote:
Originally Posted by dpa
Iam now limited to about -105C under load.. sucks.. testing some uncore;
http://www.diskusjon.no/index.php?ac...post&id=313088
Neither do I. I'll be cleaning this up in a little bit...Quote:
Originally Posted by SF3D
yes it's depends of cpu ,it's "generally" best between -90/-100 ° but there is always the exception that proves the rule :)Quote:
Originally Posted by dpa
my 975 make 5.45ghz at 3dmark05 between -99° and -105° (under my caskade 2 stages) but I need to test under LN2 soon for see the best temp for it (maybe -90°, maybe -120° or more) the i7 are strange with the cold (because of control memory and I think maybe other things) ...
I have removed the ES discussion not because there was anything wrong with it, but because it doesn't belong here. Hope you guys understand.
new record at 150Mhz lower cpu clocks, trying high uncore..
http://www.diskusjon.no/index.php?ac...post&id=313138
Nice score! little bit more tweaking an you got 38k!
That is so nice... Wish i had a system like that to play with, but ill have to stick to 2D for a while
iam giving it hell tomorrow, hoping for 38k.
edit; pic for l.oco
http://www.diskusjon.no/index.php?ac...post&id=313140
Oh! Oh!
Uncore looking very good! :D
Thanks a lot, 4th card is really tempting :D HX1000 is strong :up: Good luck on 38k
Impressive uncore:clap:
VTT?
Thx
1.62v I think.Quote:
Originally Posted by gandalfone
bumping the coreclocks on gfxs gives boost in GT3/4.. Petri, where is your 1200Mhz bios??? :D
1200Mhz core would give a 270fps GT3 with clocks at 5.4Ghz, maybe even more..
maybe that huge vtt is making the cold bug come earlier or maybe you are using more/less vcore than you used to.Quote:
Originally Posted by dpa
This is heading somewhere!
How's the new insulation working out?
I admire your determination to get that WR dpa !
Excellent results man, keep pushing it, you are almost there :up:
minor setback.. the eleet profiles is NOT working as they should!
https://www.evga.com/forums/tm.asp?m=653551
The change takes about 8-9sec.. so I tried everything from cpu test to canyon flight. the problem is not the change I believe, its just that the fps goes -+5 ALL the time. places where the fps should be steady 160, the fps is 160-155-160-155-160-155.. any tips? I have a CLOSE to 38k score if this works like it should :D
Higher uncore? :D
* ELEET saves ALL your settings at the current point of time of 'save profile', and will start polling every voltage etc according to this profile when you hot key it. Now, if all you want is to change clockspeeds, then go into your ELEET directory, under profiles folder, open up the profile with a notepad. Delete away all the voltage adjustments, this will shorten a time to load a profile.
i added this info
-edit oops sorry somehow i edited your post!!! I didnt know i can do that!!
* ELEET saves ALL your settings at the current point of time of 'save profile', and will start polling every voltage etc according to this profile when you hot key it. Now, if all you want is to change clockspeeds, then go into your ELEET directory, under profiles folder, open up the profile with a notepad. Delete away all the voltage adjustments, this will shorten a time to load a profile.Quote:
Originally Posted by dpa
38K is yours soon.:up:
Jeez your smokin haak :clap: 38k is yours for sure. Try higher uncore yet?
so mr.uncore.. you want me to go higher than 5000Mhz NB freq..?Quote:
Originally Posted by k|ngp|n
LardArse: thanks for the input on freq. do you have any tips on the fps not being steady..?