0904cpmw /m3a78-t/bios mod=hangs
Printable View
0904cpmw /m3a78-t/bios mod=hangs
ok, just found out my core 1 is actually d crippled core. no matter what value i set in acc didn't help. :shakes:
now almost all asus boards have a modded bios to unlock the 4th core. this works with any cpu batch or not?
No, there aren't much batches, which work fine. I know only the Batch EPMW and the Batch CPAW, all other batches I heard about don't work
ok, tnx ;)
so, in addition to modded bios, a right batch is necessary too :(
seems like there is still a certain risk even if u buy a proven batchQuote:
Originally Posted by simone18
I have 720 BE 0851.
http://valid.canardpc.com/show_oc.php?id=520599
I tested with my gigabyte today 0849, no good.........
I put the latest bios available from Gigabyte site F3o, surprise, no other active nucleus :mad:. With F3 bios version i have 4 Cores.:down: Gigabyte :down:
http://img301.imageshack.us/img301/7503/69619189.th.jpg
http://img147.imageshack.us/img147/816/f3o.th.jpg
i think it's amd's idea to disable d core unlock in new bios. :mad:Quote:
Originally Posted by Muraretu
i thought f3o is older then f3Quote:
Originally Posted by Muraretu
that depends on how good is the 4th core, right?Quote:
Originally Posted by Shrekogre
GIGABYTE F3O is more old than official F3, so you put older BIOS version actually.
I see now:D . I have done wrong when I download BIOSs.
I had on desktop F3 and F3o normal and I thought that F3o is oldest than F3.
WOOT!
I got a 720 BE with 0904CPCW and GA-MA790GP-UD4H. It's been 30 minutes running OCCT stable at 3600mhz.
I'll post a screen shot when I get 1 hour OCCT pass.
3 or 4 core?Quote:
Originally Posted by mngdew
Folks, I've got my 720BE and a MSI DKA790GX board today. (can't wait to finish @ work already :D)
My question is, what can happen if the 4th core fails to unlock?
Can I revert back to only 3 cores and continue from where I left off? :)
Sounds like its possible, though I feel like I've read somewhere that I may end up with a crippled/non-functional CPU, is that right?
Thanks a lot~
dunno, but it seems strange...if you try to activate 4th core through acc in bios settings and it fails, i think cpu should run as a x3 normally ;)Quote:
I feel like I've read somewhere that I may end up with a crippled/non-functional CPU, is that right?
I've had no problem reverting back to 3 core, just disable ACC and re-boot. The bios may notify you that the 'CPU has changed', just accept the change and off you go. Worst case, clear CMOS. In my experience and from all I've read the switch to 4 core is in no way permanent :)Quote:
Originally Posted by _hiVe
0904 DXXX batch can run in X4? anyone have tested?
Quote:
Originally Posted by simone18
Thanks for the answers! That means you'll have my results soon :)Quote:
Originally Posted by ecat
Keep ya posted~
gl & hf
Seconded!Quote:
Originally Posted by simone183 or 4 core?Quote:
Originally Posted by mngdew
Unlocked to 4 cores and OC'ed to 3.6GHz would be very very very nice for a chip as cheap as 720BE.
very well done ;)
how about your dfi? works well in oc?
for sure. with the 4th core enable i think it's one of the best performance/cost cpu :)Quote:
Unlocked to 4 cores and OC'ed to 3.6GHz would be very very very nice for a chip as cheap as 720BE
go for it mate, i'm waiting ;)Quote:
That means you'll have my results soon
I found that i have 4 core even if I put ACC on Auto or Disabled.:yepp:
The only problem I have is that I can not see temperature independently on each core and Overdriver does not recognize my CPU.
http://img187.imageshack.us/img187/5...hzprime.th.jpg