[Project] Water-Cooled HAF 932, Painted Satin Black

Printable View

Show 100 post(s) from this thread on one page

02-18-2009, 02:06 AM
Meatpuppet

Quote:

Originally Posted by Grinch

will it not put pressure on the tubing?

Maybe a bit, but fortunately it is on the outlet and not the inlet so the pump won't get thirsty. Eyeballing the angle, if the D5 is back as far as it can go the bend looks pretty reasonable to me. Also, once you get some tubing on those plastic barbs it is loathe to go anywhere. I would just say that a worm drive on that particular fitting would be a very good idea for the sake of redundancy. You don't want a leak anywhere in your system, but you REALLY don't want the tubing to pop off your pump outlet, especially with hard disks mounted inches above.
02-19-2009, 09:29 PM
xguntherc

that is a very very true comment there. I will make sure my hose clamps are ALL tight... but I'm worried that tightening them to much could cut the tubing..
02-19-2009, 11:37 PM
xguntherc

OK, Here's some updates for everyone. Something is wrong and I'm not able to access my Photobucket account tonight, so I'll be uploading with imageshack.. ;(

Here's some pics of my Leak Test, and I'll be installing system tomorrow after all night testing.

Yes thats the PSU on the left by the sink, with wires in the sink. But I've not used that side in over a year. (It's a 2 sink Bathroom.) So it's dry and safe. oh and I didn't mean to catch the reflection on the right side through the mirror, but it turned out cool as you can see the RAD in the mirror.
http://img518.imageshack.us/img518/2...throom1yn7.jpg

Here is the Res, I decided to mount it here, It's temporary til I get the EK 150 Multi-Option. But it looks ok. It's just to high for the filport to be used. So I just had to pour right into it, but it was pretty easy access.
http://img509.imageshack.us/img509/3183/leaktestvu6.jpg

Here is a close-up of the GTZ.. it looks like a nice block. And everything works great so far. (Can I use my never been mounted Backplate that came with my extra TRUE Cooler instead of the one that came with the GTZ) As it's all scratched and wont stick to backside anymore, but the True one would.. can I use it instead?)
http://img18.imageshack.us/img18/963...testgtzbr8.jpg

Here's the pump, I scooted it to the back of the HD Bay, and the tube is completely out of the way, so mounting my HD wont be a problem, but if I get a second, that might be tight.
http://img3.imageshack.us/img3/4968/leaktestpumpvo4.jpg

Last for tonight, Here's another shot of the Swiftech Micro Res v2. I like it a little more now I've seen it in action. but I'll still probably replace it.
http://img3.imageshack.us/img3/2787/...icroreszm6.jpg

I gave myself a little extra slack on a few of the tubes, just in case I need to drain it, and make any adjustments.. But I'm hoping it goes together good tomorrow.
What does everyone think, the pics aren't that good I know. it will look better with the GTZ mounted, my SLI 260's and some Pentosin G11 Blue UV Dye in there.. So after I get those installed tomorrow I'll post some better pics.

What does everyone think?

Thanks for stopping in and checking out my Water Build!
02-19-2009, 11:41 PM
xguntherc

oh and what does everyone think about the amount of bubbles or Air in my loop. The bubbles disappeared very fast after I went from slow, to fast on speeds. I went from 1 to 3 to 5, and back to 3 for a few mintes. Just changing it up. Now it's going all night on 3.5, unless someone says to do different.

Also that last bit of Air in the top of res. I can get a little out. but it's hard to get it. is it ok like that in the last picture? I could have someone tilt it, while I top it off where the bubble is. lol. Then it would be completely full. Other than that, I shook the case a bit, but I still need to try and get some air out of the rad, I'm sure there is still some in there. I doubt I got it all my first try..
02-20-2009, 06:15 AM
IntelFloyd

Id say you actually have too much water in that res.
I usually have mine between the top of that angled plate in there and the top of the res. Filling it up to the top isnt a good thing id say.
02-20-2009, 11:28 AM
jellyrole

Why not, wouldn't more mean cooler temperatures?
02-20-2009, 11:49 AM
xguntherc

really, you think there is to much. I was told after it bled all night to top it off. so Thats what I did, but when I woke up this morning it was a little lower from going all night, it was at the top of that little ear mount thing on the left. so it had dropped a little, but I topped it right off this morning like suggested.

Why would I want it to be only 3/4 full? whats the difference?

oh, and do those pics look ok to you guys? I did them with no flash. So they might have some noise.
02-20-2009, 11:54 AM
SNiiPE_DoGG

your fine filling it up gunth :up:

sorry I never responded to your PM, I was a little unclear on what you were asking me... maybe post the questions up explicitly onthe thread here and I will try my best to help you out

looks great so far BTW :D
02-20-2009, 12:11 PM
xguntherc

Yea, I thought it was ok to fill it up... Cool.

Oh don't worry about it, i was just asking for some general idea's and suggestions from a pro.. No worries.

and Thanks, I'm exited to see it in action
02-20-2009, 12:35 PM
NysoO

Looking good. Shouldn't be a problem with having the res filled up like that.
02-20-2009, 03:31 PM
Grinch

my res is damn near full...no issues here :) (knocking vigorously on wood) :)
02-21-2009, 12:41 PM
jellyrole

That's good, just don't knock too hard.
02-21-2009, 11:32 PM
xguntherc

ok guys, it's all up and running good... so I think. I used the Shin Etsu for now.
02-22-2009, 03:02 AM
xguntherc

Here's another update for everyone. I've got her going, and all is well so far. I think.

I'm liking my temps. but I don't know whats good or not with water, as this is my first time. I lost my H2O V.. So far I'm idle 26c, Prime Blend Load 37-40c Load!

Anways it's late and I work tomorrow, but I just figured I'd throw a few pictures up here really fast. and I'll post more tomorrow.
http://i727.photobucket.com/albums/w...leteLoop-1.jpg
Yes, that's cash under the already stack of cash on the left.. I'm a Waiter in Caesars Palace ok. I have lots of Cash sometimes!

Here's a shot of the RAD emblem, this is just a teaser shot. I'll be back with more.
http://i727.photobucket.com/albums/w...c/FeserRad.jpg

If anyone has any questions, or wants specific pictures or anything, just ask. and feel free to comment about my results.

Thanks!
02-22-2009, 06:46 AM
shazza

Looking sharp! You've done a nice job with your cable management, and your water loop is nice and simple -a good thing.

While you are missing a drain, you have the advantage of your pump being at the lowest point in your loop and out of the way of everything else. So, you can pop a connection to drain without doing too much damage :p:
02-22-2009, 07:30 AM
theseeker

Very clean!
02-22-2009, 09:36 AM
xguntherc

I see what you mean Shazza, when it comes time. I can remove the HD above it. and pop a spot for a drain right there. That would work.. just use paper towels like you said. Good point. Thanks!
02-22-2009, 10:27 AM
rioja

i wonder how it all looks from the top?
02-22-2009, 11:26 AM
jellyrole

Which way does the pump push water? Through the side or the top?
02-22-2009, 12:00 PM
SNiiPE_DoGG

Quote:

Originally Posted by jellyrole

Which way does the pump push water? Through the side or the top?

its out the top.

good stuff gunther, you've done a nice job making it very neat :up:
02-22-2009, 12:41 PM
zearth

nice setup :)
02-22-2009, 01:05 PM
NysoO

Quote:

Originally Posted by xguntherc

I'm liking my temps. but I don't know whats good or not with water, as this is my first time. I lost my H2O V.. So far I'm idle 26c, Prime Blend Load 37-40c Load!

Thats good. What's your ambient?
02-22-2009, 01:12 PM
Darkninja462

Have you got any fans on the radiator ?

Ninja
02-22-2009, 10:10 PM
spawn447

nice water setup, been looking for a setup to copy off of :)
02-23-2009, 01:16 AM
xguntherc

Quote:

Originally Posted by jellyrole

Which way does the pump push water? Through the side or the top?

Goes out the Top, and in the Side/front

Quote:

Originally Posted by SNiiPE_DoGG

its out the top.

good stuff gunther, you've done a nice job making it very neat :up:

Thanks Sniipe, good to hear coming from you. I was trying to keep it nice and clean inside.. I hate having wires everywhere, now I just need to sleeve my 6/8 pin PCI connectors.

Quote:

Originally Posted by NysoO

Thats good. What's your ambient?

Ambient is 70F in the house, so around 21c

Quote:

Originally Posted by Darkninja462

Have you got any fans on the radiator ?

Ninja

Yes, there is 3 Yate Loon D12SM.. medium speed fans on top of the RAD blowing air in a Push, down into the case. as I didn't wanna be pulling the hot air from my GPU's now would I?

Quote:

Originally Posted by spawn447

nice water setup, been looking for a setup to copy off of :)

Awesome, copy it all you want. thanks for the compliment. I'm glad my system makes you want to do the same.

thanks for the nice comments guys, I'll post more pics tomorrow. I didn't get a chance today.

Show 100 post(s) from this thread on one page