Should i be proud of this?

ok, i was going to max at 2.1v so thats cool, and im going to use Ketz modded bios to reduce over voltage by the motherboard to be sure. then comes the overclocking lol

Quote:

---

Originally Posted by LennyRhys

No offence mate but you can buy ram that has stock speed/timings 800MHz 4-4-4-10. If you get 3-3-3-8 from this at 800MHz or manage to get 5-5-5-15 at over 1100MHz some people may be impressed. :D

---

I've got some 667 budget Hynix running 1016 5 6 5 21 at 2.125 on an AM2 M2N32 SLI board... does that qualify for a cookie... thats 24/7 by the way.

Quote:

---

Originally Posted by WrigleyVillain

See if you can get Performace Level (tRD) lower

---

Some mobos (like my Abit Pro) won't allow user to set PL

Quote:

---

Originally Posted by xdrift0rx

i managed to get 510mhz out of my black pi @ 4-4-4-10 2T. i didnt cap it though because it would crash before i could :/ decent speeds for a 4gb kit???

---

How high will they go at cas5?

Lookie Here:
2x1GB D9 PL5
http://i383.photobucket.com/albums/o...achemem10k.png

2x2GB Powerchips PL6
http://i383.photobucket.com/albums/o...achemem2x2.png

Very nice mate,Honestly I think you might go for an extra voltage,pull it to 2.25V~ and oc it as far as you can.

just had an hour to play with the G.Skills and got this, i havent tried anything higher than 1000mhz yet, so just timings play.

got them at 1000mhz 5-5-4-13 @ 2V gettint 8200mb read, 7200mb write and 7800mb copy at PL8. at PL7 i get memtest errors.

so cant drop the PL anymore. what else could i try?? lol cant beleive i did quite well with the corsairs before.

I'd try higher volts. Manufacturers sell lots of sticks with stock volts at 2.2 :). If you have a fan, stick it around there, memory diesn't dissipate much wattage, so cooling it down is easy.

yeh i upped voltage to 2.1v, and used Kets modded P5Q deluxe bios 1403 and it pushed read to 8400mb, write to 7275mb and copy to 8050mb. got trfc to 48 from 60, havent tried lower and other timings are as low as possible from bsod lol and memtest and prime95 stable at 1000mhz.

should try 1066mhz, how much difference will it make?

Quote:

---

Originally Posted by Mean Machine

I'm sure it was 600MHz 2.08V at least, 4x1GB. Pretty sure in CAS4 as well, I'll just have to test the sticks out some more tomorrow or so. Hopefully they scale decently with voltage as well.

---

Was that using the 3:5 divider?

Could you show a screen shot with cpuz cpu & memory tabs and asus probe showing vdimm open?