I may do, my PC is just kinda in bits atm and don't want to take it apart further :p: (mainly due to laze :D ) I'm growing to love the TPower a little at least, but I still don't like it much :down:
Printable View
I may do, my PC is just kinda in bits atm and don't want to take it apart further :p: (mainly due to laze :D ) I'm growing to love the TPower a little at least, but I still don't like it much :down:
just installed my new e7400, currently 'burning in' @ 333fsb stock everything. 1 hour of prime so far.
not sure if i have a problem with my temp sensor, but there's around 8-10 degrees difference between the cores at idle, but they do have the same temps at load though
http://img7.imageshack.us/img7/3018/overoa8.jpg
By zerocashflow at 2009-02-16
FPO 3828B040
I'm having so much fun with this CPU under the TRUE (seems I got one of the good ones)
http://users.telenet.be/OAP2/pcmarkE7400@4.5.JPG
http://users.telenet.be/OAP2/wprime4500.JPG
Leeghoofd
You really got nice chip :) my E7400 needs 1.60 volts to do 4500 mhz stable.
It has 1.25V VID. It's a mid level chip :)
You git :p:
I've gotten to 3.4, can't figure out the screen shot or bios template though. never had a reason to I guess. I know to prt screen and paste to paint with the shots, what next? Would also like to get the template up. Thanks
You need to up them screens to a webhosting service like imageshack or co and then link them to your post ChuckM
What's the max FSB you get on your CPU mate ? 3.4seems kindda low on that mobo...
i have the same VID.. could that mean i'm gonna need the same voltages for those speeds? i haven't tried 4ghz prime runs yet..will do it once i get back homeQuote:
Originally Posted by Power_VANO
10.5x
400mhz - 1.4v not prime stable, good enough for superpi 2m
385mhz - 1.375v 30 min prime stable, will try lower voltage
Lee,
Could you post your bios template, I realize you have the DDR3 board. According to coretemp, my vid is 1.2625. I've run prime, occt and IBT everything is stable and highest temp I've seen with IBT is 45c @ 16c ambient. My board came with bios f6, should I change to f7?Haven't had a chance to do much, workin' 2 jobs sucks!
Thanks
CRAP!
I thought that I had posted this in here.
I did this abit back.
http://img175.imageshack.us/img175/3...0055515nx4.jpg
1.33v Vcore
1.80v MCH
2.30v RAM
crappy vid :(
http://i249.photobucket.com/albums/g...5_021809-1.jpg
I got to 3.6 (8 X 450) , linpack and occt stable, 49c highest temp. I'll get to play some more tomarrow.
Anyone overclock the new e7500 (11x multi, 2.93ghz) yet?
ninong
:( we got ~same chips. average overclockers they are. I am waiting my Maximus Formula from RMA for now, then I will try some more oc'ing with new Rampage 802 bios with CPU/NB Clock skew settings.
I've had no luck goin' any higher than 3.6??????????? Vcore is 1.33 in bios MCH is 1.2, have taken Vcore to 1.34, won't boot. I'm probably bein' a little chicken :banana::banana::banana::banana: with it. Did get my rma# for my ram, got to see if I can borrow some until I get them back.
Yuck! Still in the plane mate ;) Have a look at this : http://www.hwbot.org/ResultBrowseByP...puModelId=1734Quote:
Originally Posted by LagunaX
Guess it would arrive next week with the EP45T...but I can give you this little score I reached on an UD3R with an E7300
Some nice max screens :
http://images2.hiboox.com/images/080...f0d61cf320.jpg
http://images4.hiboox.com/images/080...a3da761744.jpg
I was just playin' with Easy Tune and a Vandetta xD
That's what I get stable but short time to test this rig, so not tried more than this :rolleyes:
http://valid.canardpc.com/show_oc.php?id=498128
My first E7300 on the Commando
http://images2.hiboox.com/images/080...c747f3d0fd.jpg
http://images0.hiboox.com/images/080...6ed9c56a61.jpg
http://valid.canardpc.com/show_oc.php?id=472209
The E5200 was on it, but really hard to get over 3,6 :shrug:
See you as soon as the mobo will be there...
alrighty we'll see what the R0 stepping will do - hopefully like the E0
No luck going over 3.85, anything near 400FSB reboots right away to "safe mode" so I either have a dud chip or i'm way off on the settings for this 780i.
Not impressed by it at all... thursday my cpu goes under phase... hopefully to get some better results topping at 4.75Ghz under air... hope to take 1st spot on CPU-Z around 5.6Ghz...Quote:
Originally Posted by Eeky NoX
Not impressed !!?:rofl:Quote:
Originally Posted by Leeghoofd
I think it's an open window isn't it ? For tha litlle player I am for sure ;)
Can't wait anymore...I'll do my best on air and than try some ice at first, with dice quick after my first WR :up: (or your ^^)
No phase for the moment but the project is started... a great year for benching imo \o/
I'm talking about the germans scores mate by Micmoc (referring to your HWbot link) with the E7500... nothing that we can't match with lower specced CPU's... 4.4Ghz 1mb pi run nothing to be impressed at... You can do better than him for sure even with ya current lineup of CPU's ! Good luck with ya CPU mate, hope it's a scorcher... think my limitation will be more the mobo not the CPU...
and for ya EP45T go straight to F3 or F5 bios (don't use the F6A beta, on my board it was a total pos)
Thx a lot mate ;) That's what I think too...lookin' hardly for my first pts xD (gat to hurry ^^)
And what's sure is that my mobo will not limit anything...or I will hang up myself at the first mango tree I see lol
ninong
Can you post what batch your E7400 is?
mine is: Q828A938