Project: Lian Dream

Printable View

Show 100 post(s) from this thread on one page

03-17-2009, 11:55 AM
Jokester_wild

Quote:

Originally Posted by Oli4v

Very nice, you fitted all of that in that case, I also love those V-series cases from lian li, especially wen liquid cooled !

haha yeah it was a tight fit, but somehow managed to squeeze everything in. cheers.

Quote:

Originally Posted by SiGfever

Very nice build, you deserve a treat after all that hard work. Job well done. :clap: :clap:

Its a great reward receiving all the complements on its completed finish!
03-17-2009, 07:16 PM
Jokester_wild

I was replacing the white plugs with black ones today on the back... even though I never see them hahaha but I had them now so yeah... here is what the back looks like.

http://img25.imageshack.us/img25/9505/lain007.jpg
03-17-2009, 07:37 PM
headala

wow, AMAZING wiring job, there. Great work :up:
03-17-2009, 07:41 PM
Jor3lBR

cable management Q

Quote:

Originally Posted by Jokester_wild

http://img12.imageshack.us/img12/6919/sleeving001.jpg

I really love the way your Build is coming around :up:

Do you mind sharing the specs on those screws and plastic holders you used to hold the cables (cable management) down without punching to far and hitting the mobo on the other side?

..
03-17-2009, 07:45 PM
Serpentarius

why the neoprene hose? you're going below ambient?
03-17-2009, 08:15 PM
Jokester_wild

Quote:

Originally Posted by headala

wow, AMAZING wiring job, there. Great work :up:

well thanks so much! Its great to have so much positive feedback! :D

Quote:

Originally Posted by Jor3lBR

I really love the way your Build is coming around :up:

Do you mind sharing the specs on those screws and plastic holders you used to hold the cables (cable management) down without punching to far and hitting the mobo on the other side?

..

Thanks, the wire placement worked out perfect. bit cramped but worked ha.

The holder are just cable clamps.

The place I got mine from is called Allied Electronics.
www.alliedelec.com

I got two sizes. The smaller one is part number N-2-BK-100PK and the larger is N-3-BK-100PK

and the screws are these babyshttp://www.mountainmods.com/632-25-i...ews-p-484.html, I just drilled where I wanted holes a bit smaller then the screws and away I went.

cheers!

Quote:

Originally Posted by Serpentarius

why the neoprene hose? you're going below ambient?

Well I do live in Canada... haha nah im kidding. I just used it because the first tubing choice was out of stock and I still wanted black so I tried it out. Its nice stuff.
03-17-2009, 10:37 PM
charles_h

Fantastic job!

I tip my glass to you Sir. :)
03-17-2009, 10:59 PM
patrickgerry

Wish I had the same skill and artistry! nice job
03-18-2009, 01:33 AM
Jokester_wild

Quote:

Originally Posted by charles_h

Fantastic job!

I tip my glass to you Sir. :)

Thank you for the kind words, I must admit I got the motivation and many of my ideas from looking at your beautiful builds. Must be the water in BC ;)

Quote:

Originally Posted by patrickgerry

Wish I had the same skill and artistry! nice job

Thanks, there were many times when certain things didn't look like they would come out perfect. the side panel dvd-drive door was one... but in the end it came together. If you take your time you can achieve anything. Practice makes perfect.
03-19-2009, 05:21 PM
lyl

Awesome build. I really like your style
03-20-2009, 08:03 PM
MomijiTMO

Yeah I agree with lyl, this build has a style of it's own. Great stuff.
03-20-2009, 08:41 PM
Jokester_wild

Quote:

Originally Posted by lyl

Awesome build. I really like your style

Quote:

Originally Posted by MomijiTMO

Yeah I agree with lyl, this build has a style of it's own. Great stuff.

Thanks both of you, really nice to get such positive feedback on my build!
03-20-2009, 08:57 PM
HuffPCair

Wow I am jealous right now. Amazing work, I can't wait till I can get my WC rig going. I also hope it turns out half of what this is turning out to be.

Awesome work. Can't wait to see the finished product.
08-12-2009, 09:32 PM
SirKronan

Hey, dang nice build! I really like the looks and how you integrated everything.

I was wondering, what kind of paint did you use, and does it chip easily?

As you can see, I have had some chipping issues with mine, if you look carefully at the bottom:

http://www.myzander.net/ATCS840/full...o/DSC_0355.jpg
08-13-2009, 02:09 AM
blaxtr3m3

Quote:

Originally Posted by SirKronan

Hey, dang nice build! I really like the looks and how you integrated everything.

I was wondering, what kind of paint did you use, and does it chip easily?

As you can see, I have had some chipping issues with mine, if you look carefully at the bottom:

http://www.myzander.net/ATCS840/full...o/DSC_0355.jpg

The best solution is to use a clear coat after the paint to avoid chipping ;)
gr8 build, I was waching closely since the beginning. wish I could posted earlier but registration takes a lot of time :shrug:
08-13-2009, 05:17 AM
Jokester_wild

Yeah thanks guys. My paint wasn't too bad. but if you want it done proper get powder coating, so worth it. I wish I had.
08-13-2009, 05:27 AM
hausner

Im gonna call this RIG " Dark Knight" hehhe nice!
08-13-2009, 07:46 PM
Jokester_wild

Quote:

Originally Posted by hausner

Im gonna call this RIG " Dark Knight" hehhe nice!

ha thats a good name for it. I'm thinking of adding some red sleeving on the pci-e connectors to spice it up. I got some anyhow.
08-13-2009, 08:41 PM
SirKronan

Quote:

Originally Posted by blaxtr3m3

The best solution is to use a clear coat after the paint to avoid chipping ;)
gr8 build, I was waching closely since the beginning. wish I could posted earlier but registration takes a lot of time :shrug:

You're right. I should've thought of that. I'll do that when I watercool because I'll have to re-attach a lot of stuff anyways. Any recommendations for a good touch up paint that can be brush painted? Or should I just take it all apart and spray again?

Also, is there a clear coat protectant that won't make it glossy? Thanks again!
08-14-2009, 05:52 AM
blaxtr3m3

Quote:

Originally Posted by SirKronan

You're right. I should've thought of that. I'll do that when I watercool because I'll have to re-attach a lot of stuff anyways. Any recommendations for a good touch up paint that can be brush painted? Or should I just take it all apart and spray again?

Also, is there a clear coat protectant that won't make it glossy? Thanks again!

I think it's better If you give it a second coat, that will give it a much cleaner finish.

The clear coat will not be glossy if the paint is matt , I think :rolleyes: I will try it tonight and tell you :up:
08-17-2009, 03:48 AM
LeandroJVarini

Jokester_wild, first congratulations on wonderful work you did in this case! and I would like to know which model and brand of your internal LCD and where you bought!
08-17-2009, 05:05 AM
Jokester_wild

Quote:

Originally Posted by LeandroJVarini

Jokester_wild, first congratulations on wonderful work you did in this case! and I would like to know which model and brand of your internal LCD and where you bought!

Thanks, its a VL System L.I.S 2. You can usually find them on ebay for a good deal. Heres the company website http://www.vlsys.co.kr/
10-13-2009, 10:58 AM
anubis_is_evil

Quote:

Originally Posted by Jokester_wild

So I did all of my sleeving, I now have alot of respect for people that have done it! It is very time consuming but so worth it for how it looks! :up:

Heres a few quick pics of some of the finished cables.

http://img12.imageshack.us/img12/6919/sleeving001.jpg

And the dvd drive mounted in the bottom. I also made a door on the side panel for the drive. Ill get to that later regarding pics.

hai jokester....

great build, love the way you put all the cable with that P clips..

want to ask, what size P clip that your using there ?

thx...
10-13-2009, 11:28 AM
kadozer

Amaaazing build! What are the lengths of the socket cap screws that hold the radiator in place?
10-13-2009, 05:43 PM
hale88

Can you tell me how did you get your photoshop done? thank you

Show 100 post(s) from this thread on one page