Intel Core i7 - DO NOT REMOVE IHS!

Printable View

Show 100 post(s) from this thread on one page

12-01-2008, 06:48 AM
bowman

Mm.. If I ever kill a chip I'll try to cook the solder off in the oven. That die would make an awesome keychain or necklace. :D
12-01-2008, 06:50 AM
Pt1t

Quote:

Originally Posted by Movieman

just out of curiousity, how did you kill that chip?

MSI Motherboard :D
12-01-2008, 06:54 AM
Viss

:rotf:
12-01-2008, 07:00 AM
Movieman

Quote:

Originally Posted by Pt1t

MSI Motherboard :D

ok, then I'm safe. I have the same sspec chip and probably 1000mhz less than he was trying!:ROTF:
12-01-2008, 07:19 AM
Oliver

thx for information and pics

looks nasty indeed huh
12-01-2008, 07:36 AM
Ruslan

I'm very tempted to do this to the i7 920 I just got. The q6600 that I sanded down is still chugging at 3.6 and belongs to a friend of mine now. The i7 ihs looks much thicker than the Q6600. This looks like a 12 hour project and a week worth of recovery.
http://justoverclockit.com/Fhbiewrbfi/2.jpg
I'm running it on a stock cooler and got it to boot at 4 ghz and stable at 3.6 (prime). The i7 is so fast that I'm running it on stock and it more than enough for me.
12-01-2008, 12:33 PM
veedubfreak

Just sand with 80 grit until holes develop eh.
12-01-2008, 12:40 PM
JoeBar

Quote:

Originally Posted by Ruslan

This looks like a 12 hour project and a week worth of recovery.

Only a prisoner would do this... :ROTF:
12-01-2008, 01:05 PM
George_o/c

Wow boble, that's nasty ... :D

@Ruslan: 12 hours for that ? No way ... :p :D
12-01-2008, 01:54 PM
ghost_recon88

Or just take a dremel and pliers to it, it helps speed up the process for sure ;) I did it to my Q6600 :D

http://www.ocforums.com/attachment.p...1&d=1211601554
http://www.ocforums.com/attachment.p...1&d=1211681550
http://www.ocforums.com/attachment.p...1&d=1211681564
http://www.ocforums.com/attachment.p...1&d=1211681629
http://www.ocforums.com/attachment.p...1&d=1211681785
http://www.ocforums.com/attachment.p...1&d=1212281064
12-01-2008, 02:01 PM
Jor3lBR

Stubborn

Quote:

Originally Posted by Ruslan

I'm very tempted to do this to the i7 920 I just got. The q6600 that I sanded down is still chugging at 3.6 and belongs to a friend of mine now. The i7 ihs looks much thicker than the Q6600. This looks like a 12 hour project and a week worth of recovery.

I'm running it on a stock cooler and got it to boot at 4 ghz and stable at 3.6 (prime). The i7 is so fast that I'm running it on stock and it more than enough for me.

Quote:

Originally Posted by ghost_recon88

Or just take a dremel and pliers to it, it helps speed up the process for sure ;) I did it to my Q6600 :D

OMG how stubborn or thick headed are you guys?

The Fugger and others that have actually tried said this only applies for i7 not q6600 or whatever.

The die of the i7 is glued to the metal surface and if you try to sand, dremel, or tamper with it results in a shattered and ruined die.

Now after all this you guys wanna keep knocking on the same key, oh but I did it on my Q6600 here are some pics go ahead and try it :up:
12-01-2008, 02:38 PM
LinusTech

Jor3lBR,

They told us it couldn't be done on the Core 2, but THIS IS SPAR... Xtremesystems.org.

I believe I was the first to successfully remove the IHS of a Core 2 Extreme X6800 using the cooking pot method. Others removed it before me, but I had a working CPU at the end.

There's no reason (for me) to believe that this will be any different from that. The solder in the picture on page 2 doesn't appear to be some kind of magic super solder that is any different from what was used on the Core 2. Also, if you read carefully, some of the others are not talking about removing the IHS. They are talking about sanding through it. That includes the solder.

There's always a way.

Linus
12-01-2008, 03:03 PM
Movieman

1 Attachment(s)

Quote:

Originally Posted by Linus@ncix

Jor3lBR,

They told us it couldn't be done on the Core 2, but THIS IS SPAR... Xtremesystems.org.

I believe I was the first to successfully remove the IHS of a Core 2 Extreme X6800 using the cooking pot method. Others removed it before me, but I had a working CPU at the end.

There's no reason (for me) to believe that this will be any different from that. The solder in the picture on page 2 doesn't appear to be some kind of magic super solder that is any different from what was used on the Core 2. Also, if you read carefully, some of the others are not talking about removing the IHS. They are talking about sanding through it. That includes the solder.

There's always a way.

Linus

Linus:
If you destroy a i7 this way i'm sending the boys with the 48 coat with the 64 sleeves to come visit you..:p:
12-01-2008, 03:20 PM
Marvin_The_Martian

Ley him try Dave what if he finds a way :poke:

Besides if he doesn't kill one, someone else will and I don't think you got enough coats for everyone :P
12-01-2008, 04:24 PM
003

Quote:

Originally Posted by Jor3lBR

The die of the i7 is glued to the metal surface and if you try to sand, dremel, or tamper with it results in a shattered and ruined die.

No. The die is just soldered to the IHS, just like the Core 2. That is all Fugger was confirming. The same methods for de-soldering the Core 2 will work on the i7. You can't permanently affix copper to silicon in such a way that it can't be undone, and of course sanding will work as long as you use a fine enough grain towards the end.
12-01-2008, 04:30 PM
jasonelmore

Finaly some pics. I did'nt think we were going to get to see any. Yep it's definately soildered on. pretty colors haha
12-01-2008, 04:31 PM
jasonelmore

cook

Quote:

Originally Posted by Jor3lBR

OMG how stubborn or thick headed are you guys?

The Fugger and others that have actually tried said this only applies for i7 not q6600 or whatever.

The die of the i7 is glued to the metal surface and if you try to sand, dremel, or tamper with it results in a shattered and ruined die.

Now after all this you guys wanna keep knocking on the same key, oh but I did it on my Q6600 here are some pics go ahead and try it :up:

Someone did'nt get his cookie today :shakes:
12-01-2008, 05:32 PM
Jor3lBR

Quote:

Originally Posted by jasonelmore

Someone did'nt get his cookie today :shakes:

I said it with all the best intentions don't wanna hear ppl spamming the forums with threads like: 'Tried to sand i7 now it's dead.' :)

And showing pictures of the Q6600 won't help either.

PS.: I did get my cookie today :up:
12-01-2008, 05:39 PM
clo007

Quote:

Originally Posted by boblemagnifique

it's true , for Help Charles , i have make the test on my 965XE dead :up:

Don't Remove IHS of your Nehalem Chip

http://www.ixtremtek.com/ixtek/Hardw...A447/test1.jpg

http://www.ixtremtek.com/ixtek/Hardw...A447/test2.jpg

Thank for your Information Charles :clap: , you can put the pics in the first post :up:

That is so sad, yet sexy at the same time!!!
12-01-2008, 05:49 PM
Jor3lBR

Quote:

Originally Posted by Linus@ncix

Jor3lBR,

They told us it couldn't be done on the Core 2, but THIS IS SPAR... Xtremesystems.org.

I believe I was the first to successfully remove the IHS of a Core 2 Extreme X6800 using the cooking pot method. Others removed it before me, but I had a working CPU at the end.

There's no reason (for me) to believe that this will be any different from that. The solder in the picture on page 2 doesn't appear to be some kind of magic super solder that is any different from what was used on the Core 2. Also, if you read carefully, some of the others are not talking about removing the IHS. They are talking about sanding through it. That includes the solder.

There's always a way.

Linus

Linus I didn't say it's impossible, I only think ppl will need more then a couple of bucks in sand paper and water to achieve this.

The outcome, money, and hours involved to do this will be disproportional to the benefits of the outcome.
12-01-2008, 05:49 PM
Warboy

Quote:

Originally Posted by boblemagnifique

it's true , for Help Charles , i have make the test on my 965XE dead :up:

Don't Remove IHS of your Nehalem Chip

http://www.ixtremtek.com/ixtek/Hardw...A447/test1.jpg

http://www.ixtremtek.com/ixtek/Hardw...A447/test2.jpg

Thank for your Information Charles :clap: , you can put the pics in the first post :up:

Well, atleast that brings new meaning on die shots....
12-01-2008, 09:43 PM
boblemagnifique

Quote:

Originally Posted by eva2000

ouch... nasty indeed!

:rolleyes: but not so little :D

Quote:

Originally Posted by Movieman

just out of curiousity, how did you kill that chip?

Msi X58 Eclipse ... Msi Motherboard Killer has struck again :rolleyes:

Quote:

Originally Posted by Oliver

thx for information and pics

looks nasty indeed huh

:rolleyes::D

Quote:

Originally Posted by jasonelmore

Finaly some pics. I did'nt think we were going to get to see any. Yep it's definately soildered on. pretty colors haha

yes i found too , it's beautiful colors :D

Quote:

Originally Posted by clo007

That is so sad, yet sexy at the same time!!!

Yes sexy chips without "roof" :ROTF:

Quote:

Originally Posted by Warboy

Well, atleast that brings new meaning on die shots....

I hope to more disuadir one now with these pics which confirms what was said Fugger :yepp:
12-01-2008, 09:55 PM
Charles Wirth

I do not have images but that is exactly what I saw when it was separated. Looking directly at the die layers on each half.
12-06-2008, 05:33 AM
sssf

Is it just me or do i see that there was no solder (or other heat conduction material) at the bottom left of the die?
Or did it chip off?
12-06-2008, 10:57 AM
hey

i guess sensitive sanding should always work.it seems ihs removal will be needed with pII :D

Show 100 post(s) from this thread on one page