Printable View
NO FSB Wall here :)Quote:
Originally Posted by msimax
http://valid.x86-secret.com/show_oc.php?id=388610
http://img187.imageshack.us/img187/984/nucxy9.png
http://img120.imageshack.us/img120/6487/cineb23nv7.png
*Looking for clockgen*
Pics weird because of dualscreen. lol
EDit: Btw, I'm going for a weeks vacation now :), so no more testing for now:)
nice:up: whats your secret
Overclocking through ntune makes bluescreen at about 230HTT no matter ram settings etc, just like yankee.
I assumed overclocking through bios didn't work because of no change to HTT in cpuz when I applied changes in bios.
However I did get bluescreens, so apparantly there were some changes done when ocing HTT in bios.
Therefore I oced HTT to 220 in bios, booted, and with no apparant changes to HTT I oc'd it to 250 no probs, benchable at stock vcore ( +0,03v "default" overvolting by board).
I think I have an old version of Clockgen lying around on a cd, will be testing that when I'm back from vacation (by then I will get my cpu#2 too), it seems the board (and cpu) can go further :)
i did the aod hack and it works. i also can change the volts does that work for you also. and if it doesnt can you get systool and see if it can change under cool&quiet setting
I can not run systool under vista x64, or do I have an old version? I can change cpu vid (but it is at max already, 1,2v) in aod, thats the only one, will check out with c'n'q.
Edit: Just tried, no voltage control by enabling c'n'q :(
BTW: Ain't you running x86? Then you don't need the "hack" and can run the regular 209 version wich is the last to "support" nVidia chipsets. That might be the reason why you have more options.
BTW2: Did you see the nice scaling with four cores at cinebench? 4.06x Weird
@LIKMARK
Are you running C'n'Q on your platform?
Disable it and redo Cinebench R10 ;)
Apart from that, very nice :up:
I'm not running c'n'q, standard frequencies for the 2347 is 1,9GHz with NB 1,4GHz, with 9,5 and 7 as multis. Oc'd 475MHz for an early BA revision. Max HTT in nTune is 250, so this is the max for now, need clockgen to go further. :)
yeah that 250 limit sucks. i started a thread to see if it could be raised by editing the software but it didnt go anywhere, maybe it something could be done if we emailed nvidia:shrug:Quote:
Originally Posted by LIKMARK
sorry for my delay guys, i should have more parts coming in this week so i can start building the system
Hey Likmark
congratulations for your Ocing results!!!
It was my hope!!! I think that B3 Opterons are somewhat locked....
So I'll definitively wait for shangai... no more time waste behind these b3 stepping.....
However very very good results!!!
ahh come on do a volt mod for pete sake:ROTF:
The strange thing is:
we have the same ram modules type and part....
the same motherboard....
the same core barcelona....
the things that we don't share are:
2 8800GTS SLI and maybe the PSU...
LikMark and me too have the Kinston KVR800D2D8P6K2/4G ...
but different CPU stepping.... so there is no voltage limitation.... I have 1.26V on my mobo and Likmark 1.28.... I don't think that 0.02V will give 200Mhz overclock....
However I'm not capable of making that kind of voltmods.... I will easily destroy my mobo causing a nuclear detonation.. :ROTF: I'm still a noob...
Anyone got a link for a Speedster 2 in the US? I just got the green light from the wife-she wants TriFire for Sims 3...
Need to get some cheap DC opties, any picks?
I had to drop to 266 divider to be able to oc, IMO it is ram thats holding back for you yankee. Tight subtimings are killing your overclock when you get around 230'ish HTT. I used memclk 266 with, "manual" settings (wich is really loose timings) I'll probably do a voltmod myself when I'm back from vacation btw.Quote:
Originally Posted by yankeex86x
Edit:
@ msimax: We should email them all of us, nagging them about releasing a new nTune where voltage regulation etc is included, and no limit on HTT clocking.
BTW: Have you checked the older versions if they are any better? Iirrc I had a nTune version where HTT went all the way up to 500 with my crosshair. Worth a shot I think :)
@ [XC] Kayin: Lol, nice going "tri sli for sims 3" :ROTF:. Go for some cheap stuff from Ebay like msimax, Lotsa good deals on the second gen Opterons now!
ill start emailing them today but we should really be calling asus tech support
i just download all ntune versions from guru3d:yepp: will test them later:up:
LOL. What for? "Please learn to do your job"??
Serious: We have to email them about new bios too, yes.
I asked them a few questions some time ago:
Answer:Quote:
Hello!
Are there any hardware changes done to the WS/B board that makes it different from
the L1N64WS SLI for the FX cpus. (exept colour of the pci-e slots and soldered bios
chip)
Does the WS/B board support DDPW or "split power planes"?
Will the WS/B bios work on the WS board and vice versa? Granted that you use the
right kind of memory and cpu for the respective board/bios.
Regards
Christian
... Thank you very much for nothing...Quote:
Dear Valued ASUS Customer
For an exact reply one has to do the actual test physically, but dueto our experiance this might most probably not work. The BIOS will most likely not work since it is still 2 different boards and there might be some changes.
Please also check the input that is posted on our FAQ and Forum sites
Thank you!
Best Regards
ASUS TMSS Support
The one question he actually answered, he answered wrong. :p:
As he only answered to parts of my question, I asked him again about the rest, and have not gotten any replies yet. (It's about a month ago I think)
Yeah, ebay is my friend...
Those prices are insane, QC opties for 99 bucks...
Thinking I'll stay DC and hold onto my RAM a while, then at tax time dump and go quads. Should work pretty well...
Platform as a whole just plain would handle my needs better than what I have.
Still never saw a Speedster2 for sale...
ok!!
I got it!!!
I got 2.5GHz with 3:4 ram divisor and single channel mode...
I noticed that placing ram in dual channel mode and 3:4 divisor prevents me to boot under vista and make blue screen in xp after some minutes....
I'm sure that i can go further.... much more...
this is the validation:
http://valid.x86-secret.com/show_oc.php?id=389848
Thanks to likmark... Now I've to understand what locks our ram so low....
these are DDR2-800 incapable of reaching more than 750MHz..... blah.... worst buy for now.... time to ask kingston for few info...
PS: temperatures are stable under 40° C even under load (i use FX Heatsink and fan) and the system is clearly stable without problems....
this board does have a problem sometimes with setting the mem sub timings to tight i tried contacting asus but i get the same runnaround maybe if we all contacted them on the issue we can get a new bios with new mem timings and otions that stick when you set them.
btw nice oc
yankee if you used ntune i want to see what happens when you set 255htt in the bios then see what the max is in ntune is thanks
this is a screen shot....
http://img168.imageshack.us/img168/8...1441qx8.th.jpg
yo yankee try this clockgen 1.0.4.6 with C&Q on in the bios and max battery in power profiles and after you reach 250 load this and see if you can go higherQuote:
Originally Posted by kyosen
http://translate.google.com/translat...en-us%26sa%3DG
I used ClockGen 1.0.5.3 and i got almost 2.6GHz without problems, so these CPUs are capable to reach 2.8/2.9GHz with a light overvolt (0.1/0.2V)..
However Now there's another problem:
When I put 2 modules of ram on both the yellow sockets the system enters in dual channel configuration, and won't let me enter Vista x64 (blue screen error) with 533 divisor (4:3); but when i put the 2 modules on A1 and A2, the dual channel mode is disabled, and the system is capable of booting without problems and o'cking to 2.5GHz....
So the dual channel mode is not working good for this processor....
@Likmark:
How did you make to boot on vista 64 with your ram modules on 533 (4:3) divisor and dual channel too?????
1 nice ocQuote:
Originally Posted by yankeex86x
2 did you try to set a htt over 250 in the bios to see if that raises the max limit in ntune
3 for the dual channel issue did you try to turn of bank interleave or node and
maybe run vistas or memtest before going into windows just to make sure its not your ram giving you issue