Volcano Reservoir

Have you considered having housing 2 pumps inside the volcano? You could have one pump that draws from the outside of the volcano, just run a tube under the black acrylic and then have the output running to a barb on the inside of the res allowing that to flow to the outside. kinda like having 2 barbs thread to thread facing opposite.

Then have the return line from the loop flow into the inside of the volcano with the DB1 sitting inside with an open inlet and you could possibly use a ball valve on the inlet to help control the flow of water out of the volcano. This will allow 1 pump to maintain loop pressure while the other provides the water gushing.

maybe make a sealed box for the main pump (DDC aren't submergable iirc) since I doubt that the DB1 could push enough water up fighting against a DDC, tho I could be wrong.


Its 345 am, I hope I kinda made sense.

Yeah it makes sense. But not dollars and cents. Fixed and limited budget on the client's part negates any extras like that. As is I gotta hustle and get this off the bench so I can finish some other projects. Good thought though :up:

Well you're most likely already done with it, so this is moot, but ....

To actually use it as a fully functional res, I think I would use the bottom portion as a normal res with full inlet/outlet lines.

Then put a small submersible pump (heck one of the little aquarium pumps would be plenty) inside the volcano portion and just
run a tube into the 'res proper' portion. Just have the little pump doing nothing but supplying a flow internal to the volcano/res
and not the loop in general. That might generate too much turbulence or something, but I think it would work.

so CD, does your client come to you with an excited expression on his face and said...

"I WANT A FRIGGIN VOLCANO IN MY COMPUTER!!!"?

ha ha ha

I'm more thinking an excited clickity click in his email, or PM. But yeah, sound about right.

Quote:

---

Originally Posted by kinghong1970

so CD, does your client come to you with an excited expression on his face and said...

"I WANT A FRIGGIN VOLCANO IN MY COMPUTER!!!"?

ha ha ha

---

:ROTF::rofl:


CD next you should build a res that looks like the flex compacity from back to the future. That would be tight on your ST rig. :rofl:

OR a big red bulls eye res and call it the HAL2000. :Rofl:

Quote:

---

Originally Posted by NaeKuh

CD next you should build a res that looks like the flex compacity from back to the future. That would be tight on your ST rig. :rofl:

---

You mean a flux capacitor :confused:

http://www.genesbmx.com/Flux-Capacitor.jpg

That would be cool!!!

Quote:

---

Originally Posted by Soulwind

Well you're most likely already done with it, so this is moot, but ....

To actually use it as a fully functional res, I think I would use the bottom portion as a normal res with full inlet/outlet lines.

Then put a small submersible pump (heck one of the little aquarium pumps would be plenty) inside the volcano portion and just
run a tube into the 'res proper' portion. Just have the little pump doing nothing but supplying a flow internal to the volcano/res
and not the loop in general. That might generate too much turbulence or something, but I think it would work.

---

You are right on both counts.

http://img152.imageshack.us/img152/4...ubtwinsvf1.jpg
That's for the next one sorry oops
:doh:


http://img234.imageshack.us/img234/5...obox013ji6.jpg
the BOX is very nice.

http://img134.imageshack.us/img134/7...obox014us2.jpg
Made supports form 1/2" mitred to fit the corners.

http://img140.imageshack.us/img140/8...obox015kn2.jpg
The volcano sits on these

http://img210.imageshack.us/img210/1...obox016oi1.jpg
Like this

http://img221.imageshack.us/img221/9...obox017jl8.jpg
Glued in place

http://img211.imageshack.us/img211/8...obox018ah7.jpg
I added "dots" in the corners to niche the volcano base into.

http://img134.imageshack.us/img134/3...obox020fq4.jpg
I filed the cornes of the base to notch into the dots

http://img140.imageshack.us/img140/7...obox021he1.jpg
Dots nice

http://img155.imageshack.us/img155/3...obox022zc6.jpg
Hows them apples...no worries about the ports not being sturdy.


http://img185.imageshack.us/img185/3...obox024ry2.jpg
I used a grommet and elbow to make the Volcano spurter...that's a technical term.

http://img155.imageshack.us/img155/3...obox025hu1.jpg
That's a purdy spurter there...

http://img221.imageshack.us/img221/1...obox026bo4.jpg
I think preparation H might be the answer...

http://img155.imageshack.us/img155/5...obox027dq2.jpg
I used enough tubing to make the volcano remoavable for cleaning

http://img140.imageshack.us/img140/8...obox029yk2.jpg
A clean volcano is a happy volcano

http://img155.imageshack.us/img155/3...obox031rk0.jpg
The loop actually helps lock the base into the dots.

http://img211.imageshack.us/img211/2...obox033ia2.jpg
Volcano in a box. The space under it is for lights.

http://img155.imageshack.us/img155/8...obox034vz0.jpg
I was going to use aluiminum on the top but I like this better.

http://img185.imageshack.us/img185/6...obox035xq4.jpg
Top lighting could easily be accomplished by laying a couple of CCL tubes across the top, or by using a 110VAC CCL in a desklamp.

http://img213.imageshack.us/img213/3...obox036fv3.jpg
The lid is two pieces...one exactly the size of the interoir and one exactly the size of the exterior...both beveled and polished. No gasket required. Easy access.

awesome!! but just one question... if water gets down inside the volcano will it just pool? or do you have some holes in the base the drain it?

Is it so when you turn off the volcano, it doesn't level out (basically sinking the island :))

Quote:

---

Originally Posted by jbartlett323

awesome!! but just one question... if water gets down inside the volcano will it just pool? or do you have some holes in the base the drain it?

---

That's an interesting point. I actually want the volcano to fill. I went to a fair amount of trouble to glue it and seal it so that it would hold water...I have a feeling that once full of fluid the spurting action will be more realistic than a tube squirting off the top of the box lol

Quote:

---

Originally Posted by Big_Daddy

Is it so when you turn off the volcano, it doesn't level out (basically sinking the island :))

---

The island is supported at the corners...I do hope it doesn't float:shrug:

[QUOTE=CyberDruid;2993920]That's an interesting point. I actually want the volcano to fill. I went to a fair amount of trouble to glue it and seal it so that it would hold water...I have a feeling that once full of fluid the spurting action will be more realistic than a tube squirting off the top of the box lol
QUOTE]

Ah i see... so is the tube short enough to change out the water occasionally? cause as i'm sure you know stagnant water can be a problem! :up:
regardless i am ready to see this thing in action!!! :up:

No, not saying that it will float, but if you drill a hole in the bottom of the volcano, (so the water can drain out) when it does, the water will level out and sink (not float) the island. with as much water as you'll have to add to fill the volcano, when you turn off the pump, and the water drains, it will level out.

[QUOTE=jbartlett323;2993951]

Quote:

---

Originally Posted by CyberDruid

That's an interesting point. I actually want the volcano to fill. I went to a fair amount of trouble to glue it and seal it so that it would hold water...I have a feeling that once full of fluid the spurting action will be more realistic than a tube squirting off the top of the box lol
QUOTE]

Ah i see... so is the tube short enough to change out the water occasionally? cause as i'm sure you know stagnant water can be a problem! :up:
regardless i am ready to see this thing in action!!! :up:

---

I am trying to visualize the hydsraulic action...I doubt any water will stagnate in the volcano becasue the spurter tube is short and basically the whole volume of water will by churning and exitting from the mouth eventually...I am sure there are some interesting dynamics involved in forcing a body of water out of a cone.

Right now I want to finish a few more details. I need to add some switches, a jack for 12V in and make a skirt of black acrylic to hide all that...

This really looks awesome! I'm getting excited and it's not even for me lol

Now all you have left to do is post a video of it in action!

Quote:

---

Originally Posted by CyberDruid

http://img211.imageshack.us/img211/2...obox033ia2.jpg
Volcano in a box.

---

Step 1: Cut a hole in the box!
Step 2: Put your :banana::banana::banana::banana: in the... Oh wait.

fill this sucker up :)

lets see some of that pyroclastic flow.

wow... cant wait to see the finished product!

Okay I just finished testing it at night with lights and as soon as I stretching my tallywhacker off I will upload the goods...it's way beyond my expectations. FIrst thing I thought was Why don't I ever make something like this for myself?

Just got back from a 6 hour MC ride... and now here's the shots I took before I left.

I'll head to the shop for a few minutes and see about getting some action

http://img150.imageshack.us/img150/2...eted018sn4.jpg
Hawt Sechs. Betcha never saw ports like that.

http://img511.imageshack.us/img511/1...eted014gn4.jpg
This thing belongs in a museum

http://img511.imageshack.us/img511/9...eted013as1.jpg
I remade the top. Fusing two pieces together looked crappy to me so I made one from 1/2" material on the router...it fits perfectly and is incredibly clear.

http://img529.imageshack.us/img529/5...eted008kq8.jpg
That's the view...

http://img150.imageshack.us/img150/1...eted006st0.jpg
I think the best way to top light this is with a desklamp and a 110VAC UV CCL light...putting stuff on top will block the view.

http://img213.imageshack.us/img213/9...eted004az4.jpg
There's the lights.

Before I ship this out I will mount three switches and make a cover plate.

Action Shots in a few shakes

Here's some pics to tide you over

http://img185.imageshack.us/img185/6...test006rh8.jpg

http://img213.imageshack.us/img213/8...test009st2.jpg

http://img207.imageshack.us/img207/1...test011ya3.jpg

http://img207.imageshack.us/img207/8...test012mi7.jpg

http://img185.imageshack.us/img185/7...test013hc8.jpg
And those are all taken DRY with just lighting ;)

http://img513.imageshack.us/img513/1...test018on5.jpg
MAGMA! That's Dasani bottle water: no dye.

http://img213.imageshack.us/img213/6...test021ug3.jpg

http://img185.imageshack.us/img185/2...test023li0.jpg

http://img207.imageshack.us/img207/3...test024fg9.jpg
That's pretty astounding. I had no idea it would look like that. It's all just lighting...

http://img207.imageshack.us/img207/5...test031ab5.jpg
Even under clourescent lighting the fluid appears red from the side.

http://img213.imageshack.us/img213/3...test033re7.jpg
From the top it's a constantly changing Fire of colors

http://img144.imageshack.us/img144/2...test034ty8.jpg
http://img513.imageshack.us/img513/5...test035qf1.jpg
http://img207.imageshack.us/img207/9...test036fv2.jpg

Vids to follow.

That's 1 Lucky S O B that getting this Art Work !!! The Res Has Been Pimped !!! LOVE It !

Wow! Just amazing. I love your unique reservoirs. This truly is an awesome creation. The lighting is gorgeous.

Holy :banana::banana::banana::banana: son!
That's a work of art.




Would love to see the UV dye.