how about 628MHz FSB :DQuote:
Originally Posted by erickwok
1M > 620MHz heheh
http://img385.imageshack.us/img385/9968/cpu3768kr2.png
Printable View
how about 628MHz FSB :DQuote:
Originally Posted by erickwok
1M > 620MHz heheh
http://img385.imageshack.us/img385/9968/cpu3768kr2.png
Not to be confused with my watercooled rig....
I run one of my E8400's in an air-cooled system powered up on my P5K-E Wifi.
I have been torturing it for months with volts never going under 1.52volts. It has held up just perfectly. I run daily at 500fsb x 9 = 4500 mhz. I run my G.Skill HZ on the 5:6 divider for a nice mem speed of 1200mhz with my timings set at 5-5-5-5. It gives it more punch than 1:1 with my timings set at 4-4-4-4. Although when you start getting up into the highest reaches of the fsb it is best to fall back to 1:1 at least for now. I also tighten my sub-timings in the bios it looks like this 5-5-5-5-6-30-6-4-4.
My mem is running at 2.15v . NB is 1.55, SB is 1.2 V-core is at 1.55 in bios I don't mind running as high as 1.618v at the highest clocks. My temps have never gone higher than 57C no matter what I am doing.
Here is my Daily clock:
http://img.photobucket.com/albums/v2...lla/yikers.jpg
I ran an Aquamark pass so you could see that it scoires a pretty sweet CPU score with the 5:6 mem timings. I ran a double instance of pi just cuz...:yepp:
Here is your proof that I am running this today:
http://img.photobucket.com/albums/v2...la/proof-1.jpg
Here is my best pi time so far with this board;
http://img.photobucket.com/albums/v2...illa/piguy.jpg
Here is my highest fsb with the 8.5 multi:
http://img.photobucket.com/albums/v2...Zilla/85pi.jpg
This is a very satisfying system that just runs and runs.
http://img.photobucket.com/albums/v2...a/IMG_4215.jpg
What you do not see in this pic is the 4 inch dryer hose that is hooked to the 4inch squirrel cage fan that sits outside in the cool seasons and sits inside in front of the AC unit when it is hot outside.
This is why My machine runs so cool no matter what you stress it with.
That is 265 cu.ft. of air a minute running over mt memory ,northbridge and through the Scythe cooler.
WZ
Hmm yes very tempting for my knowledge then :p:Quote:
Originally Posted by erickwok
I 'll give a try and tell U :)
You lucky low voltage guys! Damn!
My batch is Q746A500
How hard would it be to get a 8400 up to 4ghz with aircooling, 7 120mm fan, Noctua u9b cpu cooler, 4gb of Mushkin Redline pc-8000 and an Evga 750i ftw board.
My E8400 is sitting on IP35Pro, with 2GB of RAM Mushkin EC-PC 6400, cooled by ThermalRhigt Ultra 120 Extreem with standard 1x120cm Fan, can reach 4Ghz easy.
I use 446x9 for daily use, but my best in air is this : http://valid.x86-secret.com/show_oc.php?id=331771
Regards,
Abang_apy
4.05 is easy to attain. Actually, 4.5 is easy to attain, but it is not stable. 4.05 I have had no problems with when running PC8400 at 888 freq. I'm still working on my new RAM to get it stable before ramping up (from my lowest running freq of 1600 (3.6g)).Quote:
Originally Posted by AndrewL1950
Today I have done some tuning in P5K Premium Bios :
*************cpu ratio setting :
1. set AUTO first
2. when appear INTEL SPEEDSTEP option ---> set disabled
3. and then coming back to re-set cpu ratio to '9' again
CIE support : Disabled
Max CPUID Value Limit : Disabled
Vaderpool Technology : Disabled
CPU TM Function : Disabled
Execute Disable Bit : Disabled
DDR2 : 450x9 = 900 at 5-5-5-15-3-42-6-3-3
DRAM static read control : Disabled
Transaction Booster : Disabled
CPU PLL Voltage : Auto
FSB Voltage : Auto
N/B Voltage : Auto
S/B Voltage : Auto
DRAM Volage : 2V
Clock Overcharging Voltage : Auto
Low-Line Calibration : Enabled <------------- Very Important to keep stable CPU Voltage
GPU GTL Voltage Reference : 0.63x
NB GTL Voltage Reference : 0.67x
CPU Spread Spectrum : Disabled
PCIE Spread Spectrum : Disabled
Then new results of lowest 4G superpi 32M and 4.05G prime95 appear ..............:eek:
Hi dinos22 sanQuote:
Originally Posted by dinos22
I also got one E8500 Q745A703 one month ago from duck san
he said this one can do FSB664 x6 or x9 under LN2 with asus commando
since I don't have LN2 kit for this moment, I just use this E8500 in my MATX computer for playing DVD movie, he he!:up:
I would suggest that anything less than 8 hours on prime95, or orthos, to not be verified stable.
Hi Hor$emanQuote:
Originally Posted by Hor$eman
I run benchmark just for fun not seeking stable running at high clock for daily use :D
Eric, I got it!
Thx for your advice
http://i95.photobucket.com/albums/l1...anity/601a.jpg
didn't change anything , priming stable with same volts and settings under bios 0612 .Quote:
Originally Posted by Mykou
give a try later for 404 :)
@stephen23
very nice ! what mobo is it? :up:
Quote:
Originally Posted by stephen23
Well Done Stephen23:up:
Hi MykouQuote:
Originally Posted by Mykou
Stephen23 used commando to test max.FSB:clap:
I don't see what you guys are doing, Super PI does not test stability, it measures speed.
Sure I could clock my wolfdale up to 4.5-4.7 and run super PI, wow.
Prime dual thread blend at least, or orthos, or just playing damn crysis will let you know what's really stable.
if you think super pi means your system is stable, my money's on that it is not.
alright, here is a short test http://i95.photobucket.com/albums/l1...sanity/6-1.jpgQuote:
Originally Posted by slugzkea
I won't clock higher for daily usage, so 4GHz is enough for me.
Yes, 4ghz prime stable is nice, an easy hit too.
I found anything past 4ghz was a challenge to get prime stable, not impossible though.
4.4 and up on air is not really possible with prime. With my orchi, I got as high as 4.36ghz which is good enough until I go water :)
But this is the extreme overclocking section not the extremely stable section. I think the point of most of these posts was to show the potential of the new chips. Noones going to be testing stability with ln2.
I totally agree with you, mrcapeQuote:
Originally Posted by mrcape
he may enter into wrong forum to find stable cpu ;)
here is my recent short test at 4G
http://i304.photobucket.com/albums/n...4g118v1hrs.jpg
Just arrived my new Toy....
I have Problems with Temps because i use a 5 Euro Cooler but soon i hope my watercooling will be ready for action again....:D
I set 1.18 Vcore from BIOS
Its not Stable but it will be.....:clap:
http://www.imageshack.gr/files/31v7sy5xmlxjznrscqdz.jpg
I think with water 5Ghz is Possible....:up:
Q814A3?? i will check later
Very low voltage for this clock.. awesome... cant wait to see your water results. with better temps you can push it higher :)
[QUOTE=Dagalidis;2952929]Just arrived my new Toy....
I have Problems with Temps because i use a 5 Euro Cooler but soon i hope my watercooling will be ready for action again....:D
I set 1.18 Vcore from BIOS
Its not Stable but it will be.....:clap:
very special chip, Dagalidis
did you test the max. FSB ?
nice cpu, 4.5GHz @ water wont be a problem :up:
[QUOTE=erickwok;2953095]Quote:
Originally Posted by Dagalidis
My P5K Pro tops out about 545 FSB at dafeult BIOS options...
Still unmoded and i dont know about max CPU FSB..
Its a Good Chip but need to drop temps... :D
I stay here for 24/7 until watercooling be ready....
SPI 1M
http://www.imageshack.gr/files/janvx7iy2kkc666geax7.jpg
SPI 32M
http://www.imageshack.gr/files/797vyelpywgscku9a3jn.jpg