P5B DLX Reloaded - E8500 @ 629 FSB on air

Printable View

Show 100 post(s) from this thread on one page

02-03-2008, 05:06 AM
before

Quote:

Originally Posted by duck

The commando has good, too.:D

Because one piece of memory was broken, I carried it out with a single channel.:(

on air

http://tokyo.cool.ne.jp/yasukazusimo/652.gif

LN2

http://tokyo.cool.ne.jp/yasukazusimo/5928.08.gif

Golden chip here, congrats Duck-san. :up: Could you please tell us the FPO/BATCH code?
02-03-2008, 05:18 AM
duck

>M.Beier

1.7v on air

2.01v boot 550MHz LN2

>PPInDaHouse

I feel uncertain, but probably BIOS is unfinished.:confused:

>dinos22

I have used up LN2 on the way.:(
I intend to achieve 6GHz on the next time.

I saw your activity well.
There is not the events in Japan, and so I fill with envy at AU.

Good Luck Team AU !:up:

Hi PcCI2iminal

Your record seems to improve better.:)
Do your best toward 6GHz.！
02-03-2008, 05:30 AM
dinos22

Quote:

Originally Posted by duck

>dinos22

I have used up LN2 on the way.:(
I intend to achieve 6GHz on the next time.

I saw your activity well.
There is not the events in Japan, and so I fill with envy at AU.

Good Luck Team AU !:up:

:up: :up: :up: :up: :up: :up: :up:
02-03-2008, 05:32 AM
duck

Quote:

Originally Posted by before

Golden chip here, congrats Duck-san. :up: Could you please tell us the FPO/BATCH code?

Hi before-sama

FSB-652MHz Q748A203(35****) (air)
MAX-5928MHz Q745A703(2V****) (LN2)
02-03-2008, 05:42 AM
Oliver

Sweet Duck... impressive work and that chip is just nuts...

Keep pushing it.
02-03-2008, 02:16 PM
PcCI2iminal

Quote:

Originally Posted by eva2000

do you have any memset screenies at high fsb so can see what memory timings you using ?

here George

http://img98.imageshack.us/img98/2774/memsetat7.jpg

Quote:

Originally Posted by Zeus

How about the cpu's end speed, do these wolfies run higher end speed as well or is it just better for FSB?

Very nice results there PCcriminal, did you sell all cpu's or do you have some left?

they are great clockers and no more E8XXX left :(
02-03-2008, 02:24 PM
EnJoY

Junior, you are the king! Awesome result, especially since it's p965!!! :eek:
02-03-2008, 02:27 PM
PcCI2iminal

very impressive Duck - san ,congrats
I was searching for a Commando in my place but no more Commando to buy in Hiroshima area :(

Quote:

Your record seems to improve better.
Do your best toward 6GHz.！

my chip needs more voltage and i will vmod the P5B
PM sent
:)
02-03-2008, 02:29 PM
PcCI2iminal

Quote:

Originally Posted by EnJoY

Junior, you are the king! Awesome result, especially since it's p965!!! :eek:

thx Alex

i like Asus P5B series but the PCI-e 1x bug on P5B is killing me :( i tried to raise the pci-e frequency and vNB and sometimes it works and some times no...
02-03-2008, 03:22 PM
dinos22

Quote:

Originally Posted by PcCI2iminal

thx Alex

i like Asus P5B series but the PCI-e 1x bug on P5B is killing me :( i tried to raise the pci-e frequency and vNB and sometimes it works and some times no...

yeah that really sucks about P5B :(
02-03-2008, 03:48 PM
K.J.

Ln2 Direct ...
02-03-2008, 03:50 PM
Learn

Quote:

Originally Posted by PcCI2iminal

thx Alex

i like Asus P5B series but the PCI-e 1x bug on P5B is killing me :( i tried to raise the pci-e frequency and vNB and sometimes it works and some times no...

Great motherboard, great results.

Quote:

Originally Posted by dinos22

yeah that really sucks about P5B :(

Did you guys try better NB cooling. :confused: With the NB & SB watercooled, the pcie 1x problem never happen again for me.
02-03-2008, 03:55 PM
dinos22

Quote:

Originally Posted by Learn

Did you guys try better NB cooling. :confused: With the NB & SB watercooled, the pcie 1x problem never happen again for me.

good idea
02-04-2008, 12:10 AM
eva2000

Quote:

Originally Posted by PcCI2iminal

here George

http://img98.imageshack.us/img98/2774/memsetat7.jpg

they are great clockers and no more E8XXX left :(

thanks for the screenie.. gives me something to try out.. as i think part of the fsb limit is memory related heh
02-04-2008, 06:20 AM
M.Beier

Hmm, I've just asked ASUS Scandinavia for a board, hope they'll get it shipped swiftly, please, this pci-e 1x issue... What is it exactly.. And how can it be bypassed ?
02-04-2008, 06:53 AM
boblemagnifique

congratz PcCI2iminal-San & Duck-San :)

Impressive Chips i965 with the E8500 Wolfdale !!
02-04-2008, 07:08 AM
kiwi

Quote:

Originally Posted by M.Beier

Hmm, I've just asked ASUS Scandinavia for a board, hope they'll get it shipped swiftly, please, this pci-e 1x issue... What is it exactly.. And how can it be bypassed ?

If I remember right just set pci-e to 100-110 or you had to increase pci-e (sb vcore) volts to smth like 1.6 or so
02-04-2008, 03:22 PM
PcCI2iminal

Quote:

Originally Posted by dinos22

yeah that really sucks about P5B :(

I got the same problem with DFI LP UT P35 but i solved it with pci-e @ 110MHz

Learn

i will try to get a better cooling but with max voltage(and the NB works hot) and stock clocks the PCI-E works fine at 16x,the problem is when i try to run at 400FSB+,the PCI-e droop to 1x.
thx

Quote:

Originally Posted by kiwi

If I remember right just set pci-e to 100-110 or you had to increase pci-e (sb vcore) volts to smth like 1.6 or so

I`ve tried to increase the vsb without any luck and checking the cpuz the PCIE-x seems to be 16x but i got 75% less than normal.

here is a good run when everything works properly
http://img201.imageshack.us/img201/7...3870x22rz6.jpg
02-05-2008, 12:08 AM
laragirl83

Hey guys!

What about "FSB Termination" voltage...? In some post i am reading is should be lowered... i mean we got use to the settings we used with conroe, now wolfdale needs less...
So my question is.
If now I am running 8*480MHz, 1.276V, FSB termination can stay at 1.40V..? Or go lower?
02-10-2008, 05:14 AM
dinos22

hey guys

lol we tested one of E8500 chips i got off junior........we couldn't pass 580MHz FSB 32M SuperPi stable on P5B DLX that does 600MHz with other chips :( :shrug:

maybe it was the RAM we were using (bunch of corsair dominator PC10000 sticks in single and dual channel and Cellshock single and dual channel CAS4/5 >> but all my dominaotors can bench 650+ MHz no problem so donno eek)...i just can't think of anything else since the chip does 570 prime stable on air with one of junior's boards and around 550 with mine here heh

guess no 6GHz for us heheh

we were able to bench the same with 1.67v and later 1.8v ..... i'll certainly be hammering other boards with this CPU until i do some 600+ MHz FSB benchmarks :D

we had gradually increased NB volts to 1.85v while under watercooling and never going past 26C lol

http://img401.imageshack.us/img401/8673/79724010fb8.jpg[/URL]
http://img175.imageshack.us/img175/6066/86790726nx4.jpg[/URL]
http://img211.imageshack.us/img211/4822/22410751jr8.jpg[/URL]
http://img405.imageshack.us/img405/3373/84199700jt4.jpg[/URL]

this is as high as we could go untweaked running CAS5

http://img86.imageshack.us/img86/935...superpifa9.jpg
02-10-2008, 11:57 AM
JacKz5o

Very nice overclock :D
02-10-2008, 01:18 PM
Learn

Nice pics. Too bad for the MB :( 590 is not bad FSB with this MB.
02-10-2008, 01:39 PM
davemelb

Oh man, sucks that it didn't work out dino :(
You guys put in alot of effort, but always seems to be running into a wall somewhere :cussing: . It doesn't seem fair.

But good pics and good work so far. I'll continue to cheer for Team.AU. :YIPPIE:
02-10-2008, 01:54 PM
kiwi

dinos22, its probably chipset :) I could do validation @ 636 but anything above 570 was not 32M stable. 600 was ok for 1M

Chipset DI/LN2 cooled + 2V should help, I am going for 9x640 next week and 6Ghz when I get 8500 :)
02-10-2008, 01:55 PM
Brian MP5T

Nice Clocks

Show 100 post(s) from this thread on one page