Printable View
The cooler: :cool:
https://home.comcast.net/~mikeehrlic...f4/wcfullc.JPG
The system: :cool:
https://home.comcast.net/~mikeehrlic.../nf4casefc.jpg
/Note: 'Fan' next to rad is empty and a spacer, thus no 'dead spot' :hehe: :D :cool:
The result (so far): :cool:
https://home.comcast.net/~mikeehrlich/dfinf4/load.jpg
It's temporary 'cos I got some problems with the pump, but after some months with the help of Maxxx, Liquid3d and Saaya, I managed to put all together, this setup is what is written in my sig nr1
plus : Swifty TEC - MCW5000-PT ; Hydor L30 II ; dual Black Ice Extreme II
http://sites.internet.lu/folders/mer...p/SIMG0011.jpg
http://sites.internet.lu/folders/mer...p/SIMG0012.jpg
This is my water cooled case :banana:
http://www.slo-volt-mod.com/slike/Case/IMG_0007.jpg
http://www.slo-volt-mod.com/slike/Case/IMG_0006.jpg
thx, didn't expect this now. tubes are 6*1 mm, to small, but when i bould them, i had a different cpu cooler and it didn't metter :rolleyes: . in the setup are 2 more watercooled wd raptors normaly. the hdd cooler's are from heattrap, quite cheap and that stuff realy make hdd's silent (*because they are so damn heavy*). the other hdd is a normal wd with 80gig, abd doesn't need some special cooling in comparetion to the maxtor above. the tube goes above to the raptors and then to th main raditor: (*the mouse, i know, rocks, it's a razor diamondbackchamleon*).
http://www.forumdeluxx.de/gallery/da...07DSC00995.JPG
edit: if you like the stuff, hear are some mora pics. my old cpu will come on the 6800gt and this pic hear is what happen if you a weak without a proper system.
http://www.home.no/smy/dataromme/IMG_1008.JPG
her is picture of my old rig
Yay I can finally post a true H20 setup besides my bigwater in here :p
This is what I had a few months ago:
http://www.27thavenue.com/images/sys...s/internal.jpg Look at that piece of crap.
This is what I got now (not to mention a 6800GT opposed to a FX 5700 in that pic)
http://www.27thavenue.com/images/WC/running.jpg
I had the pump running via a test PSU, but not the system and had the paper towel pieces for watching for leaks, it's all running smoothly now though :D
http://www.webshop-innovatek.de/images/mont_517.jpg
anyone tried those rad yet ?
http://www.frozencpu.com/ex-rad-34.html
I may get one with my Iwaki MD-10.. :)
The flow is ok, and the temps too, u not really need the best pump to get good temps, and there are only 3 angels. Anyway i have this eheim since 3 years now, time to time i upgrade my watercooling, next step is an laing dcc and an better external compensating reservoir.Quote:
Originally Posted by ferrari_freak
http://www.alphacool.de/upload//high/13901_1.jpg
http://www.alphacool.de/upload//high/15109_1.jpg
That is pretty, do you own it? Do you like it? Link please?Quote:
Originally Posted by GravediggA
Thanks,
Yan
Here is my case, just finished installing it last night. I added a 120mm for my RAM but thats about it. I will be cutting for the rad to get better air this weekend.
http://www.dmp-racing.com/king/computer.jpg
Very nice, neatness is a beautiful thing in todays computers.
Thats the nF4 SLI-DR, right?
Did you need any special mounting hardware for the DD TDX?
Thanks,
yan
Are you talking to me?
My MB is just the Ultra-DR, my wiring is tight there by the CDs and HD but Im not sure I can get it any cleaner. The only mounting for the TDX was a lock nut on the back of the MB, thats it.
Yeah, I was talking to you.
So, did you need to buy anything special to mount it, or did it come with the TDX?
I was complementing your nice wiring job!
Yan
(VERY) Brief guide on how to build a shroud to mount a Papst 150mm on a PA 160....
https://home.comcast.net/~mikeehrlic...ff/shroud1.jpg
https://home.comcast.net/~mikeehrlic...ff/shroud2.jpg
https://home.comcast.net/~mikeehrlic...ff/shroud4.jpg
https://home.comcast.net/~mikeehrlic...ff/shroud5.jpg
Mounted:
https://home.comcast.net/~mikeehrlic...dfire2.5p1.jpg
Had it running for a few days (5V) but still annoyed me so - NEXT!!!
Put back teh Old shroud and a Panaflo L (note teh shiny G5 hiding in there :woot: and the modded mcp350 )
https://home.comcast.net/~mikeehrlic...uff/rev3.1.jpg
Also note how I opened up the wire pass-through and then used a piece of AL angle to maint structural integrity. THIS ALLOWS ME TO REMOVE THE WHOLE WC SYSTEM AS A UNIT (B4 DRAINING IF NEED BE!!!!)
Got fed up w/ the t-line and bleeding so stuff the mc5000(?) res from swifty in and after epoxying in the barbs all is GOOD :banana:
https://home.comcast.net/~mikeehrlic...f/rev3.res.jpg
Some people have been wondering how they would mount some WC in a V1000, so when I was re-arranging the case for my wife (moving drive bays back a bit for less noise) I dummied up my trusty old BIX setup to give an idea :hrhr:
https://home.comcast.net/~mikeehrlic.../v1000rgh1.jpg
This one is for eva2000 and the others who seem to have mounting issues for their storm blocks, etc (will also work on Big typhoon :D ) Threaded rod screwed into standoff screwed into backplate.
https://home.comcast.net/~mikeehrlic...pumountdtl.jpg
My rig, a classic Spanish WC style. :D
cpu: Ketchak 4.3 Silver
gpu: Postman rev. 2
rad: Pecomark AT10
pump: eheim 1048
resservoir: Handmade UV
http://danertor-art.iespana.es/dan-wc-rig.JPG
http://danertor-art.iespana.es/dan-reservoir.jpg
cheers :p:
wondeful reservoir ;)Quote:
Originally Posted by DaNerToR
i think it's very good and "attractive" :D
thanks :)Quote:
Spinal
nice PC :)
yeah :)Quote:
@Spinal would you like to post some more pictures. I have the same tower and I'm very interested how you managed to get your radiator in the case. I don't have enough room above my psu. Only 5 centimeters.
http://img156.imageshack.us/img156/9969/dsc004955mx.jpg
http://img156.imageshack.us/img156/3074/dsc004960ky.jpg
A project that's been 5 months in the making...
And a pain in Maxxx's side. :)
I am finally watercooled! woohoo.
So anyways, on to the pictures!
http://bs.brokenedge.net/water/assembled.JPG
http://bs.brokenedge.net/water/leaktest.JPG
http://bs.brokenedge.net/water/top.JPG
http://bs.brokenedge.net/water/side.JPG
http://bs.brokenedge.net/water/closeup.JPG
Thanks a bunch for all the help MaxxxRacer! :)
again some changes. new board and new geforce. the board isn't that good as anyone tells. at highvcore's the epox is way better, but the 7800gtx was to long ...
http://www.forumdeluxx.de/gallery/da...07DSC01287.JPG
http://www.forumdeluxx.de/gallery/da...07DSC01292.JPG
http://www.forumdeluxx.de/gallery/da...07DSC01293.JPG